Hi, I have recently been encountering a problem burning DVDs. I read somewhere that it might be a microsoft.net problem, so I updated to .net version 1.1 and I managed to burn 1 disk. Windows then prompted me to perform a security update on .net 1.1 so I did so, now I can't burn again! I've since updated to a beta version of .net 2.0, uninstalled 2.0, uninstalled the 1.1 security update but to no avail. I've since unplugged the CD-burner that was set as the master and have set the DVD burner as the master. I've also update Nero to 6.6xxx. My HDD is badly fragmented but I can't see that being the problem. Here's the log: Thanks in advance. Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 11:06:00 ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 17/06/2003 14:25:03 Nero version: 6.0.0.28 (Nero Express) Recorder: <HL-DT-ST DVDRAM GSA-4120B>Version: A102 - HA 1 TA 1 - 6.0.0.28 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder CD-ROM: <SAMSUNG CD-R/RW SW-248F >Version: R602 - HA 1 TA 0 - 6.0.0.28 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : SAMSUNG CD-R/RW SW-248F atapi Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVDRAM GSA-4120B atapi Port 1 ID 1 DMA: Off === CDRom-Device-Map === SAMSUNG CD-R/RW SW-248F D: CDRom0 HL-DT-ST DVDRAM GSA-4120 E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 1534MB (1571824kB) Free physical memory: 982MB (1006476kB) Memory in use : 35 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 17.1.2006 UDF/ISO compilation 18:43:51 #1 Phase 112 File dlgbrnst.cpp, Line 1800 DVD-Video files reallocation started 18:43:51 #2 Phase 114 File dlgbrnst.cpp, Line 1800 DVD-Video files reallocation completed (no file modified) 18:43:51 #3 Text 0 File Isodoc.cpp, Line 6024 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 18:43:51 #4 Phase 111 File dlgbrnst.cpp, Line 1800 DVD-Video files sorted 18:43:51 #5 Text 0 File Reader.cpp, Line 118 Reader running 18:43:51 #6 Text 0 File Writer.cpp, Line 124 Writer HL-DT-ST DVDRAM GSA-4120B running 18:43:51 #7 ISO9660GEN -11 File geniso.cpp, Line 3882 First writeable address = 0 (0x00000000) 18:43:51 #8 ISO9660GEN -11 File geniso.cpp, Line 3882 First writeable address = 0 (0x00000000) 18:43:51 #9 Text 0 File Burncd.cpp, Line 3128 Turn on Disc-at-once, using DVD media 18:44:20 #10 Text 0 File DlgWaitCD.cpp, Line 237 Last possible write address on media: 2298495 (510:46.45) Last address to be written: 2286118 (508:01.43) 18:44:20 #11 Text 0 File DlgWaitCD.cpp, Line 242 Write in overburning mode: FALSE 18:44:20 #12 Text 0 File DlgWaitCD.cpp, Line 2043 Recorder: HL-DT-ST DVDRAM GSA-4120B, Media type: DVD-R Disc Manufacturer: CMC MA - G. AE1 Disc Application Code: 64, Disc Physical Code: 193 18:44:20 #13 Text 0 File DlgWaitCD.cpp, Line 403 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD.) 18:44:20 #14 Text 0 File ThreadedTransferInterface.cpp, Line 775 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 2286119 (2286119) = #2286119/508:1.44 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286119 blocks [HL-DT-ST DVDRAM GSA-4120B] -------------------------------------------------------------- 18:44:20 #15 Text 0 File ThreadedTransferInterface.cpp, Line 944 Prepare recorder [HL-DT-ST DVDRAM GSA-4120B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681971712, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2286119 | lead-out | 1 | 0x00 | 0x41 18:44:20 #16 Phase 24 File dlgbrnst.cpp, Line 1800 Caching of files started 18:44:20 #17 Text 0 File Burncd.cpp, Line 4095 Cache writing successful. 18:44:20 #18 Phase 25 File dlgbrnst.cpp, Line 1800 Caching of files completed 18:44:20 #19 Phase 36 File dlgbrnst.cpp, Line 1800 Burn process started at 8x (11,040 KB/s) 18:44:20 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2167 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 18:44:20 #21 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 14:10,276 (850276ms) -> OK 18:44:20 #22 Text 0 File DVDR.cpp, Line 1259 Recording mode: Sequential Recording Mode 18:44:20 #23 Text 0 File Mmc.cpp, Line 19362 Set BUFE: supported -> ON 18:44:20 #24 Text 0 File DVDR.cpp, Line 1374 Start write address at LBA 0 DVD high compatibility mode: Yes 18:44:20 #25 Text 0 File Cdrdrv.cpp, Line 7912 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Media Specific: 30 00 10 20 00 00 00 00 - 00 00 21 00 00 00 00 00 0.........!..... 02 FE 10 00 02 FF A0 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 18:44:35 #26 SCSI -1135 File Cdrdrv.cpp, Line 1430 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x04540000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x10 0x32 0x4D 0x00 0x0C 0x0C 0x00 18:44:35 #27 CDR -1135 File Writer.cpp, Line 301 Write error 18:44:35 #28 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 18:44:35 #29 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 18:44:35 #30 Text 0 File DVDR.cpp, Line 1578 EndDAO: Last written address was -1 18:44:37 #31 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 0:00,000 (0ms) -> OK 18:44:37 #32 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 0:00,000 (0ms) -> OK 18:44:37 #33 Phase 38 File dlgbrnst.cpp, Line 1800 Burn process failed at 8x (11,040 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 13:07:32 File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 11:06:00 File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 05:59:42 (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
you say you changed the cdrw to slave and the dvd burner to master.However your file shows that the dma on the dvd burner is set to off, can you change that
