Hello. All of a sudden yesterday, my Pioneer DVDR-110D burner decided it wouldn't burn anything - anything at all. Data, music, nothing will burn. I've tried using both Nero and Prassi ONES (both of which worked flawlessly until yesterday) and both CD-R and CD-RW Verbatim Super Azo discs, which have never failed me before. The burner is using the latest firmware and I'm running XP Pro with SP2 and all latest updates/patches. The computer is spyware and virus-free, and all diagnostics I've tried so far tell me the unit is working properly. Both software programs fail to simulate or write. Prassi ONES gives me 'Er: 209 - Disk physical error', while Nero coughs up 'Error Reading Data'. And to make things worse, when ONES fails it needs to close and locks up the burner tray, and I have to restart Windows to get the disc out. In desperation, I tried an XP repair install and re-downloaded and applied updates etc etc. That made no difference. I've even slowed down the burning speed to the lowest possible in both Nero and ONES. You guessed it - no dice. This has never happened to me before. The machine and the burner are only a couple of months old, and I have to admit that short of a format and reinstall, I'm basically at my wits' end. I'll post the Nero error log to see if anyone can offer any suggestions. Thanx for any anticipated help. scoopyx. Nero log: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.18 Internal Version: 6, 6, 0, 18e Recorder: <PIONEER DVD-RW DVR-110D>Version: 1.39 - HA 5 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 5 Drive buffer : 2000kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <PIONEER DVD-RW DVR-110D>Version: 1.39 - HA 5 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 5 === Scsi-Device-Map === DiskPeripheral : ST3200822AS atapi Port 1 ID 0 DMA: On CdRomPeripheral : PIONEER DVD-RW DVR-110D atapi Port 5 ID 0 DMA: On === CDRom-Device-Map === PIONEER DVD-RW DVR-110D D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1023MB (1047856kB) Free physical memory: 689MB (705960kB) Memory in use : 32 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 15.4.2006 CD-ROM (ISO) 4:06:04 PM #1 Text 0 File Isodoc.cpp, Line 6359 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : TRUE Write : FALSE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 4:06:04 PM #2 Text 0 File Burncd.cpp, Line 2948 PIONEER DVD-RW DVR-110D Buffer underrun protection activated 4:06:04 PM #3 Text 0 File Reader.cpp, Line 127 Reader running 4:06:04 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 4:06:04 PM #5 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using CD-R/RW media 4:06:30 PM #6 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 359848 ( 79:59.73) Last address to be written: 292333 ( 64:59.58) 4:06:30 PM #7 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 4:06:30 PM #8 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: PIONEER DVD-RW DVR-110D; CDRW code: 00 97 26 65; OSJ entry from: CMC Magnetics Corporation ATIP Data: Special Info [hex] 1: B3 00 CE, 2: 61 1A 41 (LI 97:26.65), 3: 4F 3B 4A (LO 79:59.74) Additional Info [hex] 1: 24 1A BC, 2: 26 B2 26, 3: FF FF FF (invalid) 4:06:30 PM #9 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc for simulation. (Medium in drive: Unknown. Medium required by compilation: CD-R/RW.) 4:06:30 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 292334 (292334) = #292334/64:57.59 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_ULTRARAW96_MODE1, 2448, config 4, wanted index0 0 blocks, length 292334 blocks [PIONEER DVD-RW DVR-110D] -------------------------------------------------------------- 4:06:30 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [PIONEER DVD-RW DVR-110D] for write in raw writing DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_ULTRARAW96_MODE1, 2448/0x04, FilePos 0 367200 716000832, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___ -150 | lead-in | 0 | 0x41 | 0x00 -150 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 292334 | lead-out | 1 | 0x41 | 0x00 4:06:30 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 4:06:30 PM #13 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 4:06:30 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 4:06:30 PM #15 Phase 32 File dlgbrnst.cpp, Line 1832 Simulation started at 10x (1,500 KB/s) 4:06:30 PM #16 SCSI -1189 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 5, TA 0, LUN 0, buffer 0x038D5400 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x02 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0xFF 0x40 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x30 0x02 4:06:30 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 4:06:30 PM #18 Text 0 File Mmc.cpp, Line 17024 StartDAO : CD-Text - Off 4:06:30 PM #19 Text 0 File Mmc.cpp, Line 21774 Set BUFE: Buffer underrun protection -> ON 4:06:46 PM #20 TRANSFER -25 File Reader.cpp, Line 382 Error reading data 4:06:46 PM #21 Text 0 File Reader.cpp, Line 385 Exception value: -1 4:06:46 PM #22 Text 0 File ThreadedTransfer.cpp, Line 234 conversion failed, stopping writers 4:06:46 PM #23 Phase 34 File dlgbrnst.cpp, Line 1832 Simulation failed at 10x (1,500 KB/s) Existing drivers: File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 11/5/2002 3:16:52 PM File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 10:00:00 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Hey. Tried that, in fact I hardly ever use track-at-once. But the problem seems to have been fixed by a full format and reinstall of XP. Thanx. scoopyx
