Super Smash Brawl - Asking for d/l , seeding or posting a direct link = ban

Someone help please1! I have a pal wii and ive semi bricked it with ssb japanese version. i can still play all my games, cant access settings. ssb loads but there is no picture! only sound! what can i do to make the picture work too! thx. jack

 

Finally, I found my answer. The Legit copy works fine on D2Ckey. Seems like SSBB only has problems with first generation chips (Cyclowiz, Wiikey, Wid etc.). D2C drive modchips can play the retail just fine... yahoo!!!

 

I tried disc utility, burn and liquidcd, none of them worked. I found a program called iburn360(specifically designed for xbox360) which lets you enter the layer break. Made a copy of SSBB using Verbatim DVD+R DL on my iMac G5 1.9GHz in about 39 min. Works flawless with D2CKey.

 

My burn worked good but...

It runs for about 20 minutes and then gets a disk read error... whats the problemo?

 

My eventual success (maybe can be used as learning for others)

Wii: NTSC-USA D2B Chipset w/ WiiKey modchip
Firmware: 1.9g

Trial 1:
Had pre-ordered brawl. Got it day it came out. Put it in Wii, disc not recognized.

Trial 2:
Since I don't have LG drive, I tried the WiiKey firmware corruption trick. Pulled the plug while updating firmware @ 60, 65 and 70%. Each time, the wii would give me a white or black screen after asking me to make a save file. Other original games did not work either. Used recovery disc and 1.9g disc to go back to square one.

Trial 3:
WiiZard releases ISO onto usenet. Download, burn on Memorex DL DVD+R w/ Nero and it works perfectly (So Far).

Can't connect to an online match for the life of me though...

 

hi

Yes, baby. I just got ssbb to work on my wii. My wii was ver.3.0u, I updated to 1.9g to play smg then put in ssbb. It ask to do an update and I let it and that updated to 3.1u. Then the ssbb picture show up and click and been playing for the last few hours. I haven't see any white screen that other people mention. The ssbb is burn to a Memorex +r dl. So you really don't have to do an update to 3.2u before you put in ssbb.

tony

 

Any luck figuring this one out?

 

I did the 1.9b update method and disconnected at 70% to play retail version super smash brother brawl. I got the brawl screen to come up in the wii menu.

But in the beginning after it shows safety precaution white screen, it goes to a now loading screen. It stays at this now loading screen forever and doesnt move a step. I tried to do this 5 times and still it has not work. Also my wiisport dont work.

Any suggestions?

 

I feel like I saw this posted previously about a week ago, but I can't seem to find it anywhere(I did look through the thread), so please forgive me if this has already been asked....

Ok, so I "corrupted" my wiikey so play SSBB, and it loads fine (retail copy of course, and US version). However, when it gets to the first "Now Loading" screen, it just stays there. It doesn't move anywhere. I've tried rebooting it, taking the disc out and putting it back in while still at the loading screen, everything I could think of. My wii is running the latest 3.2U firmware. I don't think it's my laser having problems reading dual layer discs, because I've created a couple dual layer video discs using MFE Disc Creator and they worked just fine. Can anyone please help?


Thank You!

 

HELLLLLLLLLLLLLPPPPPPPPPPPPPPPPPPPPPPPPPPPP!!!!!

for a week now if try to burn ssbb in any way possible but nothing works so far i waste 26 dl blank disc whit no good one to play!!!

i'm in canada ,
my wii updated to 3.2u get wiikey whit update 1.9g drive speed set to read at 3x region free
orginal ssbb dosn't work...
i'v made a back up via friidump 0.4.0 (7,92 Go (8 511 160 320 octets)
burned on dvd-r dl ridata at 2x whit imgburn 2.4.0.0
put the back up on my wii , wow my wii made the update..
cool on the wii channel page i can see ssbb i click on ssbb , wow title screen show up i try start and a @#$%?& black screen come up .....after 5 seconde of black screen i get this error message....
error 001 an aunothorised devise was found.....

i'm getting sick already of that game and i never play already...loll

please help me to support mario!! ;-)

 

multipost removed

 

I have a canadain nstc wii with a d2c chip in it. I've burnt 4 copies so far and none will play in the wii. Says can't read disk. I've tried with layer break and with out at different speeds still no luck. any help would be appeciated.
Thanks
power

 

@djmples

I got ssbb to work on my wii with wiikey. I use 1.9g to updated and my wii is v.3.0u then I put in the copy of ssbb and it ask to update and I let it update to version 3.1u. Then it reboot and go back to the main menu where ssbb screen show up, play the game and have not see any white screen or problem of any sort. I didn't make any change or use the 1.3 conf. disk on my wii, just the 1.9g to update disk.

I think the problem you have is the dual layer disk itself. I use memorex +r dl and it work for me. I think you need to try another brand of disk.

 

As far as I know error 101 isnt caused by a bad burn, its that the wii is detecting the modchip. Try running the 1.9g update again.

 

Can someone please help me with my problem? I don't want to waste any more DL discs. First post on this page.

 

Try updating your driver firmware.

 

For my burner? I made sure it had the latest driver before doing this.

 

SUCCESS!!! Wii-Wizard version works!

Wii: D2B-cut pins
chip: wiikey
region: NTSC
firmware: 3.2U
wiikey firmware: 1.9g
buring program: Imgburn
burning speed: 2.4x
Media: Sony DVD DL + R (WORKS FLAWLESS ON ALL MY BACKUPS, EVEN BRAWL TOO)

Burn it the first time and it works PERFECTLY....

 

can we play a DVD+R DL copy of SSBB on a modded Japanese Wii? do we have to do the swap trick or can it play fine?

 

2 questions:

1. Can I play someone with a US version of SSBB with my JAP copy of SSBB as long as we have the friend codes?

and

2. If i have 3.2U, would i need to do the 15% trick still to play a JAP copy of SSBB