SVCD cutting

Please Help
I have tranfer along hrs movies on my PC by using the Instant DVD recorder from VHS tap,
I save as the SVCD but when I use the Tmpgenc to do the cutting and the audio slower than the video about 2 second,
If any one know there are free ware out there can cut the svcd quick and correct as the original SVCD, please email me the link or post it here.

Thanks

P.S I use the Tmpgenc to cut the VCD is work fine but not the SVC

Why?????????

 

Hi dRD
Thanks for the link about the DVtool, and I have try that freeware and it work very good.
But I have 2 question on that DVtool that I hope you can help me out with.

1. I can't use the feature slitting START and END , I only able to use the length of the MB only.

2. The DVtool won't know the file size , if the file size more than 4 GB, do you know why?

Please let me know if you know how to fix that or may be this DVtool ver. is free and it won't allow to use all the feature in that software.

Thank you very much

 

I've had DVtool running almost 18 hours on a 43 minute mpeg. Is there any way of telling how much longer it's going to take?

 

Isis1 dvtool only took like 7 minutes on my one hour svcd so you might want to stop check your settings and start again......

 

Hi Wonderboy
can you tell he how to use the start and ending in the DVtool?
and also why the DVtool don't know the size of the movies if the movies is bigger than 2 to 3 GB
Thanks
AsianDTV

 

Thanks wonderboy,

I stopped the process and sure enough, nothing was happening. I started it up again and once more I'm at 75 minutes.

These are the readings along the bottem. Could you tell from them what I'm doing wrong?

100% done, 0 files written, speed is 0.18 MB/s (this number has slowly gotten smaller), 77 min. passed, 0 minutes left.

The length of the mpeg is 491453955 and the original size is 866 MB. I've followed the guide that dRD pointed to exactly as it is written. I'm about to pull my hair out.

 

Anyone have any ideas on where I might find this older version?

I tried the TMPGenc tools and my computer crashed.

**************
That was easier than I thought. http://www.musclesoft.de/combatman/start.php?page=software/dvtool.html&lang=e

Older versions: DVtool 0.40 (03/2002), DVtool 0.31 (03/2002), DVtool 0.26 (09/2001), DVtool 0.24 (01/2001), DVtool 0.23 (01/2001), DVtool 0.21 (05/2000), DVtool 0.19 (04/2000), DVtool 0.11

Which one do you suggest?

 

Thanks, but I've answered my own question. DVtool 0.24 is the most recent version that has File Processor 2.31 as mentioned in the guide. One of the others may work but after 4 days of trying I didn't want to try anything that wasn't a sure thing.

Thanks everyone.