I just bought swap magic, and I burned my CD's that I want to play. I'm a little unclear on how to use the PS2 slide disc. I've watched videos on it, and I'm still a little lost. Do I have to remove any parts off of the PS2? Please, any feedback would be very helpful. Thanks.
i copied this from another site. In order to make the Slide-Tool workable, please remove the front cover of the cd/dvd drive firstly. There is no need to open the console because it is "clipped" on from the outside. Step 1 - Remove Screw 1. Turn on your PlayStation2 and press the eject button, then the tray comes out. 2. Let the tray stay out, and turn OFF the power on the backside of your PlayStation2 (rocker switch). This would make the console without power and keep the tray still out. 3. Turn around the console, and put it onto a table with good light for work. 4. Now, you can unscrew / remove the tiny screw on the back of the tray. If you feel it is stuck really tight, it should not be a problem. Get a good screwdriver. Step 2 - Remove Cover 1. Use the smallest screwdriver you can find, or get a pin. The cover is "clipped" on in right and left side of the tray. Please be carefully!! The clips on the tray holding the cover can be broken easily. You just have to expand is about 0.5 millimeters in each side at a time, so that it comes right off. 2. When you see / find the clips, put the screwdriver or pin down and twist a little -- while pulling gently in the cover. It comes off. Hints: If you are worried about it, you can heat up the plastic materials a little using a blow dryer so it will become more flexible. If it broke up, don't be frustrated - a little super glue can turn around the situation. reinstall the screw.
yea those are pretty good steps, it worked for me. But if you need anything, go here http://lib1.store.vip.sc5.yahoo.com/lib/tisinc99/ps2scinst.htm
you dont have to buy or make a fancy slide card like that. i made mine from a little save card. Like the ones you get at Kroger, Tom Thumb, and other major grocery stores. Its like a card that you use and you save like 1$ from you purchases and stuff. Any ways if you know what i am talkin about it made for a key chain. And what you do is just get scisors and cut the cm left over from from to the end of the card. So now you are left with a slit that the exact size of the pin. and you know the rest
