The Box Flash Problem

Hi all, Ive flashed a few Box's but Ive come across a problem with one last night, When It finished flashing using firmware 4.54 the box rebooted and the screen now just displays ON, and nothing else. From what I know it should show at least one channel on the display.
Ive reflashed it about 5 times now and still the same problem?
Any ideas what the problem might be?

 

Have a look here :
>> http://forums.afterdawn.com/thread_jump.cfm/531363/3215755

 

Ive been through all the problems with a bad flash but Ive got "Flash Burning" on the 4.45 on the box but still im getting the "ON" display and nothing else. when I switch on/off at the back the box reboots but still the same display and it wont go any futher.

 

Are you in the uk or Ireland?

 

South Dublin on N£L

 

The firmw@re file could be corrupt, Delete it from your desktop & download it again & reflash. If its still the same, then try the 4.50 for Ireland & see if thats any better.

 

I did follow up the link that you posted on a "Bad Flash" and tired to reload 4.50 for ireland but still the same, would it have anything to do with the "Boot File" on the GT Rom Loader?

 

Which GTRom are you using?

 

GT Ro_v4.00.exe from the 4share site

 

Robbie, i have to leg it now but have a read here thanks to malci
>> http://forums.afterdawn.com/thread_jump.cfm/657495/4040716

Best of luck.

 

So Ive been using the wrong GT Rom Loader, I'll try it later myself Thanks for replying back. I'll post back on how I got on

 

Thanks alot Neolfy we got it back working on the 4.50 version of the software. Is this the correct version to use or should I use 4.54 and is the latter more stable as some programs are breaking up or just a blank screen (No Picture).

 

4.50 is the correct version for Ireland, you can try the 4.54 & see if its any better.