HI can anyone point me in the right direction on how to update the software I've trieds nul moden cable with no luck, can't see anything for this box. Any help greatly received
You will find all you need in Eamo's FTA Library about your box okay just go into The Box PVR folder and everything you need is there, link at the bottom of post or just click here and it will take you into the Folder. http://www.4shared.com/dir/3042613/f6e3421c/sharing.html
Trying to update The b0x, using the 4.57 firmaware and 4.03 loader, but if fails each time, i have channels from an auto scan but very few work; N*l dublin im trying to access the E*MU enable option but cannot find it, i have entered loads of codes to try it, from the menu with 1570 &1886 ans so on, but no luck, i attempted to do it from the parentol control view with no luck, any help?
If the box has firmware on it at all then you should be able to access the Cas System, (Removed) EDIT- The above is for the Starview 2 The Box, and not The Box PVR, that is a completely different method of entry and the code is 2007, and auto-update needs to be turned on. (Was going off the version of Firmware you had posted.
Getting a bit confused here now, why are you trying to flash that box with the incorrect Firmware, that Firmware and LOader you have quoted is for Starview The Box, not The Box PVR.
iv been trying just about everything at this stage, the link in eamos library for the pvr loader is dead and iv been trying to find it somewhere else with no luck, so iv just tried anything really
This is what you want for your box, don't try anything or else you could brick it. Firmware http://www.4shared.com/file/77414148/dc7e6e12/StarViewPVR-21122008.html?dirPwdVerified=fe6700bc Loader http://www.4shared.com/file/32157004/d1ec34ca/PVR_Loader.html?dirPwdVerified=77fb70e9 You will need to unzip the Loader okay, so have you got Winrar installed.
Don't think you are doing it correct, there is a completely different way of doing it so download these help files, that is your best bet, I do not have a PVR here at the minute, and JBVid is your man on them boxes, but have a look at the correct procedure and try it for yourself. http://www.4shared.com/file/2603936...ade_PVR_Firmware.html?dirPwdVerified=df02cb29 http://www.4shared.com/file/2503807...the_PVR_Firmware.html?dirPwdVerified=df02cb29 http://www.4shared.com/file/3232654...RS_GUIDE_Dec2007.html?dirPwdVerified=df02cb29
cheers mate the update worked perfect there, i was at fault for the most part, turned on the auto update and am now rescanning, should work from here out i think, thanks for the help
Well done, you will be alright now, sorry about the little confusion up above, I automatically went off the Firmware Version you posted and so it turned out the wrong box, lucky the Flash did not go on it might have bricked it lol, take care
hi malci how are you? good i hope.... right now to the problem bit . i had an sv1 which you sorted me out with befor xmas, its now turned it self in to a brick. so i have just got a new sv4 the box super usb. ive done the useual scan and all is well but i can not get on to the secret menu. the instuctions from your link say code 1570 but nothin happens. just stays on main menu.. any ideas please
Replied to your pm, and as said you will not get anywhere until you have Firmware on the box, so I am sure that you are now working on doing exactly that.
