All my now have channels with dollar signs beside them. Anyone Any ideas.I have had my box for about 6 mths with no probs until today
Hi If you've not done anything to it at all first try switching off at the back power switch for a minute then switch it back on an wait for an update, if its the same after 5 / 10 mins you will need to look which version of F/W (Firm Ware) you have installed the latest is v4.506 Oct and is in the 'eko.4shared' link at the end of this post, To find your present F/W version press Menu/System Setup/System Information. If you have the latest F/W already installed and channels are not clearing after a scan goto Menu / System Setup / Press OK when the Parental Control line in yellow is highlighted then press i then 2007, this should take you the the Cas System Menu. (You may need try this a few times to get your key press timing correct on the remote control but this will get you into the Cas Syatem Menu) If you can't get onto the Cas System Menu screen then you are doing something wrong so keep trying it. When you are on the Cas Menu Screen and with Nagravision 1,11 highlighted in Yellow Press OK, On the Provider ID Line select the same provider as earlier by using the left/right arrow buttons on remote then press the LAST (load default) button on your remote, then the OK button to (Store) wait for it to save then press exit, then make sure Autoupdate option is On (Bottom Item in Cas System Menu.) This is the equiv of the EMU, Exit out, Goto a scrambled channel and wait for update. In the link below goto the TheBox PVR Folder for F/W and Documentation Folder for How too's jbvid http://eko.4shared.com/
