Hi All, I have many a Superbox but one is causing me no end of grief. It has the latest firmware 8.04 API but it will not stay on. It has been working fine for around 3months then suddenly it rebooted last week with a message on the front Ld80 then no picture from the output only a green screen. I powered off and then on and it came back for about 1-2 hours then the same again. Now it seems to work fine for around 5 mins and then reboots and goes off. Any idea's or do think it is faulty hardware.?? I have looked through as many threads as possible but can't seem to match anything. Thanks in advance..
the problem is got to do with electrolytic capasators on ur power supply circuit board check of the following link it may help, it worked for a mate of mine, http://img89.imageshack.us/img89/725/svcapfixpnggv2.png
Hi There The circuit board on the box i have STAR VIEW 3 SUPER BOX has a different layout than the picture in your link. http://img89.imageshack.us/img89/725/svcapfixpnggv2.png Can you help my box also has the Ld80 error do not know how to proceed.
the picture is the layout for starview 3 the box super, unless u have a clone starview, can you take a picture of the inside of ur box and post it on here for me to look at?
Hi Pat Sorry for not getting back to you i was in the US for the last 2 weeks. I got the box re flashed but its still not working. Dont think i have a cloned one. Bought them from a online store in the UK If i have a cloned one what are my options. Will send you a picture when i get the box back. dr
thats a starview 1 image so starview 3 will vary. if your box has 25 x 7 vents on the top it should be real and also no red paint on the screws.
Hi there my box has 20 x 7 vents on top the screws do not have any paint on any screws. Printed on a label underneath it states THE BOX SUPER and on the cardboard outer packaging box it states THE BOX SUPER STAR VIEW 3. When i turn on the box and getting it re flashed again i get the following messages. boot and then ld80 and straight away the box powers off. Rgds
hi all i have the same problem as above. when investigating the issue i noticed C5 had leaked as well as C21. C21 has leaked onto U2 so i am gonna replace them all just to be on the safe side. I was wondering if anyone knows what part number U2 is because its unreadable. Anyhelp will be great cheers
i had the dreaded ld80 display. The only way of getting rid of it was to flash thebox with one of the old softwares i then had to input the codes manually but it did solve the ld80 display. And the advice im passing on was given to me by a member on here and as coninued to work sound for months hope this helps........... below is a link how i solved my problem http://forums.afterdawn.com/thread_view.cfm/755386
