This is my error message, can anyone help? Burn Error Burn process failed at 8x (11,080 KB/s) [serial removed by Neph] Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 10:18:06 PM Nero API version: 6.3.1.17 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Recorder: <QSI DVD+-RW SDW-082> Version: LX44 - HA 1 TA 0 - 6.3.1.17 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : IC25N080ATMR04-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : QSI DVD+-RW SDW-082 atapi Port 1 ID 0 DMA: Off === CDRom-Device-Map === QSI DVD+-RW SDW-082 E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 73400320 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 502MB (514480kB) Free physical memory: 177MB (181580kB) Memory in use : 64 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 15.11.2005 NeroAPI 12:33:26 AM #1 Phase 112 File APIProgress.cpp, Line 273 DVD-Video files reallocation started 12:33:26 AM #2 Phase 114 File APIProgress.cpp, Line 273 DVD-Video files reallocation completed (no file modified) 12:33:26 AM #3 Phase 111 File APIProgress.cpp, Line 273 DVD-Video files sorted 12:33:26 AM #4 Text 0 File Reader.cpp, Line 118 Reader running 12:33:26 AM #5 Text 0 File Writer.cpp, Line 124 Writer QSI DVD+-RW SDW-082 running 12:33:26 AM #6 Text 0 File AudioCompilationImpl.cpp, Line 817 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 12:33:26 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 12:33:26 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 12:33:26 AM #9 Text 0 File Burncd.cpp, Line 3172 Turn on Disc-At-Once, using DVD media 12:34:16 AM #10 Text 0 File DlgWaitCD.cpp, Line 245 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2286127 (508:01.52, 4465MB) 12:34:16 AM #11 Text 0 File DlgWaitCD.cpp, Line 257 Write in overburning mode: NO 12:34:16 AM #12 Text 0 File DlgWaitCD.cpp, Line 2137 Recorder: QSI DVD+-RW SDW-082, Media type: DVD+R 12:34:16 AM #13 Text 0 File DlgWaitCD.cpp, Line 418 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.) 12:34:16 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [QSI DVD+-RW SDW-082 ] -------------------------------------------------------------- 12:34:16 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [QSI DVD+-RW SDW-082 ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2286128 | lead-out | 1 | 0x00 | 0x41 12:34:16 AM #16 Phase 24 File APIProgress.cpp, Line 273 Caching of files started 12:34:16 AM #17 Text 0 File Burncd.cpp, Line 4182 Cache writing successful. 12:34:16 AM #18 Phase 25 File APIProgress.cpp, Line 273 Caching of files completed 12:34:16 AM #19 Phase 36 File APIProgress.cpp, Line 273 Burn process started at 8x (11,080 KB/s) 12:34:16 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 12:34:16 AM #21 SCSI -1066 File Cdrdrv.cpp, Line 1188 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0A875000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0B 0x00 0x00 0x00 0x00 0x24 0x00 12:34:16 AM #22 Text 0 File DVDPlusRW.cpp, Line 613 Start write address at LBA 0 DVD high compatibility mode: Yes 12:46:30 AM #23 SCSI -1122 File Cdrdrv.cpp, Line 1442 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x01630000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x57 Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x04 0xCD 0x80 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0B 0x00 0x00 0x00 0x00 0x57 0x00 12:46:30 AM #24 CDR -1122 File Writer.cpp, Line 304 Unable to recover TOC 12:46:30 AM #25 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 12:46:30 AM #26 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 12:46:33 AM #27 Phase 127 File APIProgress.cpp, Line 273 Generating DVD high compatibility borders 12:47:25 AM #28 Phase 129 File APIProgress.cpp, Line 273 Generating DVD borders completed successfully 12:47:25 AM #29 Phase 38 File APIProgress.cpp, Line 273 Burn process failed at 8x (11,080 KB/s) 12:47:25 AM #30 Text 0 File AudioCompilationImpl.cpp, Line 828 DRM: DRM burn session terminated. 12:47:25 AM #31 Text 0 File AudioCompilationImpl.cpp, Line 857 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 12:07:32 AM Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) Backup Complete Burning did not complete successfully! However all output files were successfully encoded, and they are ready for burning with appropriate DVD burning software. DVD output files were saved to the following location: C:\Documents and Settings\Owner]My Documents\download Total size: 4,463 MB Total processing time: 2 hours 16 minutes
First off welcome to AD. Now as to your log, You need to go back and edit out your serial number. Its the one that starts with 1A20- . Just go to the pencil symbol next to your post and it will pull up the edit post screen. you have a very old version of Nero, i think Moses used it in his time to burn back-ups of the 10 commandments Now the latest 6x vers is 6.6.0.18 and the download packages are around 35Mb each, so its going to take lots of time if you only have dial-up. i cant seem to find this drive on the firmware page. I can find an SDW-041, but that is not the same as your drive. Go to the drive manufactures home page, and see if they have a firmware update. Your vers is LX44. I think that drive may be a Fujitsu-Siemens but i am not sure. DMA is also off for that drive Bbmayo can show you how to fix that: http://home.comcast.net/~bbmayo/checking DMA.pdf You are doing ok on memory. You could still try to close out some programs when burning to free up more memory. You are burning to the very edge of the disc, and that is where dye coverage can be spotty or missing. Reduce your target size to something like 4300 or so. Here is where you change it in Nero Recode 2 you click on the custom setting, and it lets you input the target size. looks like it doesn't like your media. Try some good media, and Slow it down to 4x burns maximum. Fix all those things, try different [bold]GOOD[/bold] media, and see about that firmware and if you can update it. You don't appear to have any other major issues going on from what i can tell. BTW who made the discs you are using? I cant tell from the log. and that took waaaaaaaayy too long to do. Probably because your DMA was off on the drive you used.
Also i am going to get a mod to move this thread, as i think it belongs in the Nero section, not shrink.
