Tutorial on running ISO's via USB on Devhook, Firmware 1.5 ONLY

Discussion in 'Sony PSP - Mod and firmware discussion' started by amitguru, Jul 23, 2006.

  1. tehjoker

    tehjoker Regular member

    Joined:
    Sep 15, 2006
    Messages:
    1,037
    Likes Received:
    0
    Trophy Points:
    46
    what he means by untouched is that the iso has not been modified (made smaller/upgrading taken out/made dummy files) Duh!
     
  2. juan2320

    juan2320 Regular member

    Joined:
    Jan 13, 2005
    Messages:
    650
    Likes Received:
    0
    Trophy Points:
    26
    pandalori I do not have a TA-082 2.71 psp so I can not help you.
    I do not know if USB mod works on a TA-082.(searsh for a Hen C thread)

    maskiri untouched means what tehjoker sed(not been modified)
    Some of the iso's you DL are riped(so it may not works)
    What is your iso game size?

    When you extract the files with WinRAR and was made into in iso format(that is the untouched game) do not do anything to it.(you can .cso it if you what)
    prince of persia works for me(untouched)
    If the game is untouched it has to work in DHv46.(with my settings in this page)

    poop_dood if you are useing my settings for coded arms iso(you need a UMD)
    but you can try this settings for old games(I think no UMD)
    target: reboot UMD
    UND_ISO:ms0:/ISO/need for speed.iso
    UMD-MODE: ISO ANYUMD
    Flash:ms0:/dh/150F(nandflash)
    UMD Ver.:2.xx-> 2.00
     
  3. poop_dood

    poop_dood Member

    Joined:
    Oct 19, 2006
    Messages:
    7
    Likes Received:
    0
    Trophy Points:
    11
    i dont know about yer settings, i just want to run coded arms without a UMD, someone PLZ PLZ PLZ help me, 3$ via paypal
     
  4. CrisKahn2

    CrisKahn2 Regular member

    Joined:
    Dec 14, 2005
    Messages:
    706
    Likes Received:
    0
    Trophy Points:
    26
    so can u run iso on devhook using wifi instead of usb????
     
  5. maskiri

    maskiri Guest

    i followed those instructions and all it said was game could not be started fffffeee something...damn
     
  6. khanbaba

    khanbaba Member

    Joined:
    Dec 19, 2005
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    11
    hey does any one know if i can use my usb thumb drive to load games off. i bought a dongle for it to go from my usb to a mini usb connector.

    thanks
    KHAN
     
  7. juan2320

    juan2320 Regular member

    Joined:
    Jan 13, 2005
    Messages:
    650
    Likes Received:
    0
    Trophy Points:
    26
    poop_dood go to this tutorial to play without umd into drive http://forums.maxconsole.net/showthread.php?t=24456
    (some games you will need to fix) and most new games will not work.
    I think GTA and DBZ will work ok.

    CrisKahn2 wifi will not work(only USB)

    khanbaba you can not use a usb thumb drive to load games(you need to have the usbhost on your PC)
     
  8. Airek

    Airek Member

    Joined:
    Oct 23, 2006
    Messages:
    8
    Likes Received:
    0
    Trophy Points:
    11
    Perfect tutorial. Very simple instructions.

    Only problem I'm having is playing Daxter. I've tried two different copies, and one freezes on the intro, the other has a frozen black screen random during loading sequences.

    Is anyone else having Daxter related problems, or am I having bad luck in finding a good copy?

    Airek
     
    Last edited: Oct 24, 2006
  9. maskiri

    maskiri Guest

    i thn its the def jam that has a slight fault coz i tried gta and locoroco both wrkd.......

    do u guys eva say wen u r coping big files to your psp memory stick and your computer keeps sayin cannot find specified files...does any1 knw how to fix this...although it eventually copies after a long time its very annoyin
     
  10. juan2320

    juan2320 Regular member

    Joined:
    Jan 13, 2005
    Messages:
    650
    Likes Received:
    0
    Trophy Points:
    26
    Airek Daxter works untouched for me.(you have old fixed game)for an old loader.(you need to fix it for DH)use prx from a game(2.5 or 2.6 FW) that work for you and put them in the iso where the old .prx's file are.(look in this thread and you will see how to do it) go back like 20 pages.

    maskiri you need a untouched game so all your games work.

    I had that(cannot find specified files) when I was coping a game to my MS it stoped. I use a new USB port in the back of my PC and now it works ok.(do not use the USB port that is in the 8 in 1)or 9 in 1 that has MS and other stuff.
     
  11. deosvx

    deosvx Guest

    WOW!! Nice tutorial. Luckily I already had most of it setup from when I downgraded. Just needed the mod and the info about the usbhostfs. First iso I booted worked perfectly. One thing you might wanna add is to create an ISO folder inside the usbhostfs folder and put your ISOs inside of it.... Hey some people might think that devhook magically finds em wherever they are on the computer. KUDOS mate!
     
  12. maskiri

    maskiri Guest

    wow thanks a lot juan im kinda an epert at tha devho@## thank u very much!!!!!!!!!much luv
     
  13. amitguru

    amitguru Guest

    Doing research of HenC/FW 2.71/TA-082 after I gather my required info I will make a guide for each of the above^^, Juan will you help me? PM me you MSN add.
     
  14. juan2320

    juan2320 Regular member

    Joined:
    Jan 13, 2005
    Messages:
    650
    Likes Received:
    0
    Trophy Points:
    26
    amitguru go to your PM.
     
  15. Iaijutsu

    Iaijutsu Member

    Joined:
    Oct 28, 2006
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    11
    basically, i did downgrade my TA-082 PSP to fw 1.5. So is there a way i can make the PSP think i still have a 2.6/2.7/2.8 FW without changing it everytime? And i just dont get how you load the ISOs....it just wouldn't load up. Plus, i don't know where to put everything. damn. Anyway, thanks in advance for the people who would reply.
     
  16. juan2320

    juan2320 Regular member

    Joined:
    Jan 13, 2005
    Messages:
    650
    Likes Received:
    0
    Trophy Points:
    26
    Iaijutsu do you have a 1.5 psp? Did you read this thread?(that is what you need to do)and you will know all you need.(first page)
    How did you downgrade a TA-082?

    If you have a 1.5 psp and(or a 2.71 psp with HenC)
    you can get DevHook Ultimate Installer v3.1 http://www.psp-haxors.com/?page_id=6 (it will put all the files you need in your MS)

    this are the serttings you need.
    DEVHOOK v0.46(FW v2.71)
    TARGET: (reboot XMB)
    UMD-ISO: ms0:/ISO/game.iso
    UMD-MODE: ISO ANYUMD
    FLASH: ms0:/dh/271(MS HOOK)
    UMD Ver.: 2.xx -> 2.00
    CLOCK: 222/111
    USB: Enabled(or off if you have the iso's in your MS)
    PL-ADR: 89000000
     
  17. mystic54

    mystic54 Member

    Joined:
    Oct 28, 2006
    Messages:
    28
    Likes Received:
    0
    Trophy Points:
    11
    Is anybody else having problems with the step #8
    "8)Now on your PSP go to UMD SELECT and you should see an option "usbhostfs0:/" open this and you should see ISO/ and driver/, open the ISO folder and your ISO's should be there!"

    I can see usbhosts0 but when I click on it, the blue highlighted option just goes to the umd drive above that usb option. I think it could possibly deal with when I installed the drivers for the first time I tried to get usbhosts working.

    Does anybody have any ideas?
     
  18. Fako

    Fako Member

    Joined:
    Oct 29, 2006
    Messages:
    9
    Likes Received:
    0
    Trophy Points:
    11
    Hi everyone, I have this problem here.

    I installed the usbhostfs0 drivers thingy but when I boot the .exe the "Connected to device" never appears. I'm all new to the devhook thing because I always used 1.5... anyway if someone can help it would be nice.
     
  19. deosvx

    deosvx Guest

    make sure devhook is installed by going into your memory stick on the PSP and seeing if you have DeviceHook Launcher MOD. Hook up the PSP to your computer and load DeviceHook. USBHostFS should now say connected to device. If not make sure you can view your PSP on the PC by going into USB connection on the PSP, you should have a new drive called Removable Media show up in windows explorer. If you do than there might be a problem with windows recognizing the USBHostFS driver.
     
  20. Fako

    Fako Member

    Joined:
    Oct 29, 2006
    Messages:
    9
    Likes Received:
    0
    Trophy Points:
    11
    Yup, Under the Game>Memory stick... Escape DEVHOOK from FW2.xx and DEVHOOK launcher mod 1.45... nothing else since I formatted the ms (followed the guide). Do I need to have devhook installed?

    Oh and no, when I boot DEVHOOK launcher mod my psp doesn't apear in 'my computer'
     
    Last edited: Oct 29, 2006

Share This Page