upgrading ms-6786

Discussion in 'PC hardware help' started by lizzard00, Nov 26, 2009.

  1. lizzard00

    lizzard00 Guest

    hi, im looking forward to upgrade my motherboard with a new cpu, ram and graphics. its a ms-6786. i have been wondering what sort of capacity the board will support in these parts. is there any program which could tell me that? for instance i only now it will only accept ddr1 module up to 333mhz.
     
  2. ddp

    ddp Moderator Staff Member

    Joined:
    Oct 15, 2004
    Messages:
    39,167
    Likes Received:
    136
    Trophy Points:
    143
  3. lizzard00

    lizzard00 Guest

    what type of graphic card i could put in it, what module and what size. the manual says that the cpu support is at 2000mhz and more so will this guy work?: AMD Athlon II X2 250 BOX( AM3) (65W,45NM) and by the way what socket does the board has am2+, am3?
    looking forward for reply
     
  4. dailun

    dailun Active member

    Joined:
    Mar 16, 2006
    Messages:
    3,074
    Likes Received:
    0
    Trophy Points:
    66
    CPU Support
    Socket -A (Socket 462) for AMD PGA Athlon processor at 2000MHz + and more.
    133/166 & 200*MHz Host bus speed (uses dual clocking to obtain 266, 333 & 400*MHz FSB). with KM400A

    It's socket A with SDRAM and an AGP video slot.

    You can't upgrade the CPU much beyond what you have. No, you can't put an ATHLON II in it. You might be able to put a single core FX in it, but no X2s whatsoever.

    Time for a new PC.

    BTW, ddp gave you a link with all of the specs. Did you even bother to try to read it?
     
    Last edited: Nov 27, 2009
  5. lizzard00

    lizzard00 Guest

    ok so tell me folks what sort of cpu is the best i can put in that board, and also tell me the same story with the graphics. i would like you to tell me direct names of the products if you would.
     
    Last edited by a moderator: Nov 27, 2009
  6. ddp

    ddp Moderator Staff Member

    Joined:
    Oct 15, 2004
    Messages:
    39,167
    Likes Received:
    136
    Trophy Points:
    143
    better off replacing those parts with new parts. did an upgrade for a customer replacing her motherboard with onboard video, socket 478 cpu(p4-2.8ghz) & ram(256meg ddr) with a socket 775 motherboard with onboard video, intel dual core 2.5ghz cpu & 2-1gig ddr2 ram including tax just under $200Can. was able to use her drives & case but had to reload windows.
     
  7. dailun

    dailun Active member

    Joined:
    Mar 16, 2006
    Messages:
    3,074
    Likes Received:
    0
    Trophy Points:
    66
    I agree with ddp. You should forklift the entire mobo, cpu, and video card.

    Upgrading to mthe best parts possible in that system wouldn't even be extending the life of the system because the best parts that could go into that system are far out of date.

    However, just to humor you, the fastest processor you could run is an Athlon XP3200+, and the best video card would be an AGP 8X (anything).

    IMHO, spending money on upgrading this mobo is "throwing money down a smoking hole".
     

Share This Page