very big problem with ram

Discussion in 'PC hardware help' started by COULDNT, Jul 2, 2006.

  1. COULDNT

    COULDNT Guest

    i have a problem.my pc have 2 modules of sdram 2*128.my cousin gives me 2 modules 512 mb 2*512 of his computer.i have install the 2 modules but my pc it isn't start.i have tried with one 128 and one of 512 and it start without problem.but iwith the other 128mb module i have a problem.it says that one gile is missing.system32/drivers/fastfat.sys
    i have win xp pro.msi motherboard with 40gb hd fat32.what i do wrong?
     
  2. ianski7

    ianski7 Guest

    Hi, put bothe 512mb in and see if that works. Then try adding the smaller memory.
     
  3. COULDNT

    COULDNT Guest

    I DO THIS.I HAVE PUT BOTH 512 AND IT CAN'T START.I PUT ONE 128 AND THE 512 AND IT START CORRECT.I DID SOME CHANGES BIOS AND IT START CORRECT WITH 2 512.WHAT IS THE CORRECT SETINGS IN BIOS FOR 2 512 SDRAM PC133 CL3?
     
  4. ianski7

    ianski7 Guest

    Hi,what motherboard do you have? Try loading factory defaults in bios.
     
  5. COULDNT

    COULDNT Guest

    I HAVE MSI MOTHERBOARD MS 6534
     
  6. ddp

    ddp Moderator Staff Member

    Joined:
    Oct 15, 2004
    Messages:
    39,184
    Likes Received:
    144
    Trophy Points:
    143
    COULDNT, knock off the caps lock as is referred to shouting in the forum rules above.
     
  7. syxguns

    syxguns Active member

    Joined:
    Jan 13, 2006
    Messages:
    1,378
    Likes Received:
    4
    Trophy Points:
    68
    COULDNT

    Don't mess with the BIOS. Put the memory back in the way you have it stated here. Start the computer, right click "My Computer" and select properties. Under the general tab it will tell you how much memory you have. If it says that you only have 128, then the memory could be shot. Try the other stick of 512 the same way. If you still have only 128 then ask about the BIOS.
     

Share This Page