Help a brother out: [bold]Mr. ipass[/bold] needs help!! "Hello, I've ordered 2 of the Viper Extreme chips, soldered them on, checked my connections, changed pot to 200, got to the viper extreme bios screen flashed cobra 1.2 on one of them, installed the second chip on a diff gc, plugged in usb programmer, loaded the drivers, bios, gcos 1.5 flash, then get the message saying found usb cable, but cannot detect viper chip. The Gamecube is on, the usb adapter doesn't program the chip, the ribbon cable is fine, I'm not sure what else to do to program the second chip. I have tried two different computers with usb flash cable, same error message. PS also tried burning the flash file to dvd, flashing from gamecube extreme's bios, it just sits there says programming for half hour or more, have used Nero burning rom, no multisession. At this point I don't know what to do next, Any help would be appreciated, thanx!"
