Hello; I have been using Nero Ultra 6.6.0.1 for about one week with a PLEXTOR DVDR PX-716A. Sometimes with I burn a data CD or data DVD everything goes good until the very end then I get a "Could Not Perform Fixation" error and then the burn process fails. When I try to burn a new disc the second time it usually burns OK with no problem. What does this error message mean and how can I prevent it from happening? Thanks for your help - have a great week!
it can be due to the blank discs, but also could be some settings that need tweaking.. post LAST section of your Nero log, which is in c:\program files\ahead\nero\nerohistory.log, but DO NOT post your serial number which usually begins with '1A21' or similar
Hello Creaky; Thank you for helping me. You told me to post the last section of the history log. I didn't know for sure where the last section started so I posted the entire document without my serial number. At several points in the log an error is mentioned. You said that sometimes the fixation error is caused by the blank disc or settings that need to be tweaked. I am using very high quality Mitsui CD (50 cents each) and Verbatim DVD ($1.oo each) discs. - do you mean that the blank discs are bad? Also what settings can I look at tweaking? Thanks again for your help! Bill Artman Bill Artman Photography, Inc. Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.16 Internal Version: 6, 6, 0, 16b (Nero Express) Recorder: <PLEXTOR DVDR PX-716A> Version: 1.08 - HA 3 TA 0 - 6.6.0.16 Adapter driver: <atapi> HA 3 Drive buffer : 8192kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <JLMS XJ-HD166S >Version: DGS3 - HA 3 TA 1 - 6.6.0.16 Adapter driver: <atapi> HA 3 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On DiskPeripheral : Maxtor 6B160P0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : PLEXTOR DVDR PX-716A atapi Port 3 ID 0 DMA: On CdRomPeripheral : JLMS XJ-HD166S atapi Port 3 ID 1 DMA: On === CDRom-Device-Map === PLEXTOR DVDR PX-716A E: CDRom0 JLMS XJ-HD166S F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 2046MB (2095852kB) Free physical memory: 1585MB (1623100kB) Memory in use : 22 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.8.2005 CD-ROM (ISO) 10:43:48 PM #1 Text 0 File Isodoc.cpp, Line 6356 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 10:43:48 PM #2 Text 0 File Burncd.cpp, Line 2948 PLEXTOR DVDR PX-716A BURN-Proof activated 10:43:48 PM #3 Text 0 File Reader.cpp, Line 127 Reader running 10:43:48 PM #4 Text 0 File Writer.cpp, Line 122 Writer PLEXTOR DVDR PX-716A running 10:43:48 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 10:43:48 PM #6 Text 0 File Burncd.cpp, Line 3233 Turn on Track-At-Once, using CD-R/RW media 10:43:48 PM #7 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 359845 ( 79:59.70) Last address to be written: 59907 ( 13:20.57) 10:43:48 PM #8 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 10:43:48 PM #9 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: PLEXTOR DVDR PX-716A; CDR code: 00 97 32 19; OSJ entry from: Prodisc Technology Inc. ATIP Data: Special Info [hex] 1: E0 00 B0, 2: 61 20 13 (LI 97:32.19), 3: 4F 3B 47 (LO 79:59.71) Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid) 10:43:48 PM #10 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:43:48 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 59908 (59908) = #59908/13:18.58 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 59906 blocks [PLEXTOR DVDR PX-716A] -------------------------------------------------------------- 10:43:49 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [PLEXTOR DVDR PX-716A] for write in TAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 122998784, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0x00 -150 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 59908 | lead-out | 1 | 0x41 | 0x00 10:43:49 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1119 Removed 2 run-out blocks from end of track 1. Length: 59908 -> 59906. 10:43:49 PM #14 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 10:43:49 PM #15 Text 0 File Burncd.cpp, Line 4120 Cache writing successful. 10:43:49 PM #16 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 10:43:49 PM #17 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 48x (7,200 KB/s) 10:43:49 PM #18 SCSI -1189 File Cdrdrv.cpp, Line 1180 SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x036D6000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x02 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0xFF 0x40 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x02 10:43:49 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 10:43:49 PM #20 Text 0 File Mmc.cpp, Line 21708 Set BUFE: BURN-Proof -> ON 10:43:52 PM #21 Text 0 File Cdrdrv.cpp, Line 1286 22:43:52.640 - PLEXTOR DVDR PX-716A\H3 T0 : Queue again later 10:44:35 PM #22 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:44:39 PM #23 Text 0 File Mmc.cpp, Line 16352 <PLEXTOR DVDR PX-716A > start Close Session 10:44:58 PM #24 Phase 37 File dlgbrnst.cpp, Line 1832 Burn process completed successfully at 48x (7,200 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.189 , size=24832 bytes, created 11/17/2004 10:16:48 AM File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\atapi.sys': Ver=5.1.2600.1135 (xpsp2.020921-0842), size=87040 bytes, created 10/24/2002 3:59:48 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Bill Artman Bill Artman Photography, Inc. Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.16 Internal Version: 6, 6, 0, 16b (Nero Express) Recorder: <PLEXTOR DVDR PX-716A> Version: 1.08 - HA 3 TA 0 - 6.6.0.16 Adapter driver: <atapi> HA 3 Drive buffer : 8192kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <JLMS XJ-HD166S >Version: DGS3 - HA 3 TA 1 - 6.6.0.16 Adapter driver: <atapi> HA 3 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On DiskPeripheral : Maxtor 6B160P0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : PLEXTOR DVDR PX-716A atapi Port 3 ID 0 DMA: On CdRomPeripheral : JLMS XJ-HD166S atapi Port 3 ID 1 DMA: On === CDRom-Device-Map === PLEXTOR DVDR PX-716A E: CDRom0 JLMS XJ-HD166S F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 2046MB (2095852kB) Free physical memory: 1581MB (1619748kB) Memory in use : 22 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.8.2005 UDF/ISO compilation 10:47:42 PM #1 Text 0 File Isodoc.cpp, Line 6356 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : TRUE Multisession type: : Continue multisession Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 10:47:42 PM #2 Text 0 File Reader.cpp, Line 127 Reader running 10:47:42 PM #3 Text 0 File Writer.cpp, Line 122 Writer PLEXTOR DVDR PX-716A running 10:47:42 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 10:47:42 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 10:47:43 PM #6 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 10:47:43 PM #7 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 915311 (203:24.11, 1787MB) 10:47:43 PM #8 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 10:47:43 PM #9 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: PLEXTOR DVDR PX-716A, Media type: DVD-R Disc Manufacturer: MCC 02 - RG20 Disc Application Code: 64, Disc Physical Code: 193 10:47:43 PM #10 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:47:43 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 58432 (58432) = #58432/12:59.7 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 58432 blocks [PLEXTOR DVDR PX-716A] -------------------------------------------------------------- 10:47:43 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [PLEXTOR DVDR PX-716A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 2 to 2: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 119668736, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 856880 | lead-in | 0 | 0x41 | 0x00 856880 | 2 | 0 | 0x41 | 0x00 856880 | 2 | 1 | 0x41 | 0x00 915312 | lead-out | 1 | 0x41 | 0x00 10:47:44 PM #13 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 10:47:44 PM #14 Text 0 File Burncd.cpp, Line 4120 Cache writing successful. 10:47:44 PM #15 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 10:47:44 PM #16 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 8x (11,080 KB/s) 10:47:44 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #856880 10:47:44 PM #18 Text 0 File DVDR.cpp, Line 2379 Recording mode: Sequential Recording Mode for Multisession 10:47:44 PM #19 Text 0 File Mmc.cpp, Line 21708 Set BUFE: BURN-Proof -> ON 10:47:44 PM #20 Text 0 File DVDR.cpp, Line 2534 Start write address at LBA 856880 DVD high compatibility mode: Yes 10:47:44 PM #21 Text 0 File Cdrdrv.cpp, Line 8862 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: F7F1F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: F7F30 h Start sector number of the next Border-In: 1012D0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 0F 7F 30 00 10 12 D0 - 00 00 00 00 00 00 00 00 ...0............ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 10:47:47 PM #22 Text 0 File Cdrdrv.cpp, Line 1286 22:47:47.578 - PLEXTOR DVDR PX-716A\H3 T0 : Queue again later 10:48:26 PM #23 Text 0 File WriterStatus.cpp, Line 116 <PLEXTOR DVDR PX-716A > start writing Lead-Out at LBA 915312 (DF770h), lenght 0 blocks 10:48:27 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:48:27 PM #25 Text 0 File DVDR.cpp, Line 2774 EndDAO: Last written address was 915311 10:48:33 PM #26 Phase 181 File dlgbrnst.cpp, Line 1832 Writing lead-out... 10:49:01 PM #27 Phase 37 File dlgbrnst.cpp, Line 1832 Burn process completed successfully at 8x (11,080 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.189 , size=24832 bytes, created 11/17/2004 10:16:48 AM File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\atapi.sys': Ver=5.1.2600.1135 (xpsp2.020921-0842), size=87040 bytes, created 10/24/2002 3:59:48 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Bill Artman Bill Artman Photography, Inc. Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.16 Internal Version: 6, 6, 0, 16b (Nero Express) Recorder: <PLEXTOR DVDR PX-716A> Version: 1.08 - HA 3 TA 0 - 6.6.0.16 Adapter driver: <atapi> HA 3 Drive buffer : 8192kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <JLMS XJ-HD166S >Version: DGS3 - HA 3 TA 1 - 6.6.0.16 Adapter driver: <atapi> HA 3 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On DiskPeripheral : Maxtor 6B160P0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : PLEXTOR DVDR PX-716A atapi Port 3 ID 0 DMA: On CdRomPeripheral : JLMS XJ-HD166S atapi Port 3 ID 1 DMA: On === CDRom-Device-Map === PLEXTOR DVDR PX-716A E: CDRom0 JLMS XJ-HD166S F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 2046MB (2095852kB) Free physical memory: 1580MB (1618488kB) Memory in use : 22 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.8.2005 UDF/ISO compilation 10:51:17 PM #1 Text 0 File Isodoc.cpp, Line 6356 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : TRUE Multisession type: : Continue multisession Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 10:51:17 PM #2 Text 0 File Reader.cpp, Line 127 Reader running 10:51:17 PM #3 Text 0 File Writer.cpp, Line 122 Writer PLEXTOR DVDR PX-716A running 10:51:17 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 10:51:17 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 10:51:17 PM #6 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 10:51:18 PM #7 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 650159 (144:28.59, 1269MB) 10:51:18 PM #8 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 10:51:18 PM #9 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: PLEXTOR DVDR PX-716A, Media type: DVD-R Disc Manufacturer: MCC 02 - RG20 Disc Application Code: 64, Disc Physical Code: 193 10:51:18 PM #10 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:51:18 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 91760 (91760) = #91760/20:23.35 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 91760 blocks [PLEXTOR DVDR PX-716A] -------------------------------------------------------------- 10:51:18 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [PLEXTOR DVDR PX-716A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 2 to 2: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 187924480, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 558400 | lead-in | 0 | 0x41 | 0x00 558400 | 2 | 0 | 0x41 | 0x00 558400 | 2 | 1 | 0x41 | 0x00 650160 | lead-out | 1 | 0x41 | 0x00 10:51:18 PM #13 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 10:51:19 PM #14 Text 0 File Burncd.cpp, Line 4120 Cache writing successful. 10:51:19 PM #15 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 10:51:19 PM #16 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 8x (11,080 KB/s) 10:51:19 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #558400 10:51:19 PM #18 Text 0 File DVDR.cpp, Line 2379 Recording mode: Sequential Recording Mode for Multisession 10:51:19 PM #19 Text 0 File Mmc.cpp, Line 21708 Set BUFE: BURN-Proof -> ON 10:51:19 PM #20 Text 0 File DVDR.cpp, Line 2534 Start write address at LBA 558400 DVD high compatibility mode: Yes 10:51:19 PM #21 Text 0 File Cdrdrv.cpp, Line 8862 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: B152F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: B1540 h Start sector number of the next Border-In: B84E0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 0B 15 40 00 0B 84 E0 - 00 00 00 00 00 00 00 00 ...@............ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 10:51:21 PM #22 Text 0 File Cdrdrv.cpp, Line 1286 22:51:21.968 - PLEXTOR DVDR PX-716A\H3 T0 : Queue again later 10:52:16 PM #23 Text 0 File WriterStatus.cpp, Line 116 <PLEXTOR DVDR PX-716A > start writing Lead-Out at LBA 650160 (9EBB0h), lenght 0 blocks 10:52:16 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:52:16 PM #25 Text 0 File DVDR.cpp, Line 2774 EndDAO: Last written address was 650159 10:52:22 PM #26 Phase 181 File dlgbrnst.cpp, Line 1832 Writing lead-out... 10:52:51 PM #27 Phase 37 File dlgbrnst.cpp, Line 1832 Burn process completed successfully at 8x (11,080 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.189 , size=24832 bytes, created 11/17/2004 10:16:48 AM File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\atapi.sys': Ver=5.1.2600.1135 (xpsp2.020921-0842), size=87040 bytes, created 10/24/2002 3:59:48 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Bill Artman Bill Artman Photography, Inc. Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.16 Internal Version: 6, 6, 0, 16b (Nero Express) Recorder: <PLEXTOR DVDR PX-716A> Version: 1.08 - HA 3 TA 0 - 6.6.0.16 Adapter driver: <atapi> HA 3 Drive buffer : 8192kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <JLMS XJ-HD166S >Version: DGS3 - HA 3 TA 1 - 6.6.0.16 Adapter driver: <atapi> HA 3 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On DiskPeripheral : Maxtor 6B160P0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : PLEXTOR DVDR PX-716A atapi Port 3 ID 0 DMA: On CdRomPeripheral : JLMS XJ-HD166S atapi Port 3 ID 1 DMA: On === CDRom-Device-Map === PLEXTOR DVDR PX-716A E: CDRom0 JLMS XJ-HD166S F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 2046MB (2095852kB) Free physical memory: 1580MB (1618584kB) Memory in use : 22 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.8.2005 UDF/ISO compilation 10:55:06 PM #1 Text 0 File Isodoc.cpp, Line 6356 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : TRUE Multisession type: : Continue multisession Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 10:55:06 PM #2 Text 0 File Reader.cpp, Line 127 Reader running 10:55:06 PM #3 Text 0 File Writer.cpp, Line 122 Writer PLEXTOR DVDR PX-716A running 10:55:06 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 10:55:06 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 10:55:06 PM #6 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 10:55:07 PM #7 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1196431 (265:52.31, 2336MB) 10:55:07 PM #8 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 10:55:07 PM #9 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: PLEXTOR DVDR PX-716A, Media type: DVD-R Disc Manufacturer: MCC 02 - RG20 Disc Application Code: 64, Disc Physical Code: 193 10:55:07 PM #10 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:55:07 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 296160 (296160) = #296160/65:48.60 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 296160 blocks [PLEXTOR DVDR PX-716A] -------------------------------------------------------------- 10:55:07 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [PLEXTOR DVDR PX-716A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 2 to 2: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 606535680, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 900272 | lead-in | 0 | 0x41 | 0x00 900272 | 2 | 0 | 0x41 | 0x00 900272 | 2 | 1 | 0x41 | 0x00 1196432 | lead-out | 1 | 0x41 | 0x00 10:55:07 PM #13 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 10:55:07 PM #14 Text 0 File Burncd.cpp, Line 4120 Cache writing successful. 10:55:07 PM #15 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 10:55:07 PM #16 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 8x (11,080 KB/s) 10:55:07 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #900272 10:55:07 PM #18 Text 0 File DVDR.cpp, Line 2379 Recording mode: Sequential Recording Mode for Multisession 10:55:07 PM #19 Text 0 File Mmc.cpp, Line 21708 Set BUFE: BURN-Proof -> ON 10:55:07 PM #20 Text 0 File DVDR.cpp, Line 2534 Start write address at LBA 900272 DVD high compatibility mode: Yes 10:55:07 PM #21 Text 0 File Cdrdrv.cpp, Line 8862 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 10289F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 1028B0 h Start sector number of the next Border-In: 10BC50 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 10 28 B0 00 10 BC 50 - 00 00 00 00 00 00 00 00 ..(....P........ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 10:55:11 PM #22 Text 0 File Cdrdrv.cpp, Line 1286 22:55:11.500 - PLEXTOR DVDR PX-716A\H3 T0 : Queue again later 10:56:38 PM #23 Text 0 File WriterStatus.cpp, Line 116 <PLEXTOR DVDR PX-716A > start writing Lead-Out at LBA 1196432 (124190h), lenght 0 blocks 10:56:38 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:56:39 PM #25 Text 0 File DVDR.cpp, Line 2774 EndDAO: Last written address was 1196431 10:56:45 PM #26 Phase 181 File dlgbrnst.cpp, Line 1832 Writing lead-out... 10:57:13 PM #27 Phase 37 File dlgbrnst.cpp, Line 1832 Burn process completed successfully at 8x (11,080 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.189 , size=24832 bytes, created 11/17/2004 10:16:48 AM File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\atapi.sys': Ver=5.1.2600.1135 (xpsp2.020921-0842), size=87040 bytes, created 10/24/2002 3:59:48 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Bill Artman Bill Artman Photography, Inc. Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.16 Internal Version: 6, 6, 0, 16b (Nero Express) Recorder: <PLEXTOR DVDR PX-716A> Version: 1.08 - HA 3 TA 0 - 6.6.0.16 Adapter driver: <atapi> HA 3 Drive buffer : 8192kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <JLMS XJ-HD166S >Version: DGS3 - HA 3 TA 1 - 6.6.0.16 Adapter driver: <atapi> HA 3 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On DiskPeripheral : Maxtor 6B160P0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : PLEXTOR DVDR PX-716A atapi Port 3 ID 0 DMA: On CdRomPeripheral : JLMS XJ-HD166S atapi Port 3 ID 1 DMA: On === CDRom-Device-Map === PLEXTOR DVDR PX-716A E: CDRom0 JLMS XJ-HD166S F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 2046MB (2095852kB) Free physical memory: 1579MB (1617304kB) Memory in use : 22 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.8.2005 UDF/ISO compilation 10:59:47 PM #1 Text 0 File Isodoc.cpp, Line 6356 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : TRUE Multisession type: : Continue multisession Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 10:59:47 PM #2 Text 0 File Reader.cpp, Line 127 Reader running 10:59:47 PM #3 Text 0 File Writer.cpp, Line 122 Writer PLEXTOR DVDR PX-716A running 10:59:47 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 10:59:47 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 10:59:47 PM #6 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 10:59:48 PM #7 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 684895 (152:11.70, 1337MB) 10:59:48 PM #8 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 10:59:48 PM #9 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: PLEXTOR DVDR PX-716A, Media type: DVD-R Disc Manufacturer: MCC 02 - RG20 Disc Application Code: 64, Disc Physical Code: 193 10:59:48 PM #10 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:59:48 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 103552 (103552) = #103552/23:0.52 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 103552 blocks [PLEXTOR DVDR PX-716A] -------------------------------------------------------------- 10:59:48 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [PLEXTOR DVDR PX-716A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 2 to 2: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 212074496, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 581344 | lead-in | 0 | 0x41 | 0x00 581344 | 2 | 0 | 0x41 | 0x00 581344 | 2 | 1 | 0x41 | 0x00 684896 | lead-out | 1 | 0x41 | 0x00 10:59:48 PM #13 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 10:59:48 PM #14 Text 0 File Burncd.cpp, Line 4120 Cache writing successful. 10:59:48 PM #15 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 10:59:48 PM #16 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 8x (11,080 KB/s) 10:59:48 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #581344 10:59:48 PM #18 Text 0 File DVDR.cpp, Line 2379 Recording mode: Sequential Recording Mode for Multisession 10:59:48 PM #19 Text 0 File Mmc.cpp, Line 21708 Set BUFE: BURN-Proof -> ON 10:59:48 PM #20 Text 0 File DVDR.cpp, Line 2534 Start write address at LBA 581344 DVD high compatibility mode: Yes 10:59:48 PM #21 Text 0 File Cdrdrv.cpp, Line 8862 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: B4ACF h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: B4AE0 h Start sector number of the next Border-In: BDE80 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 0B 4A E0 00 0B DE 80 - 00 00 00 00 00 00 00 00 ..J............. 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 10:59:51 PM #22 Text 0 File Cdrdrv.cpp, Line 1286 22:59:51.156 - PLEXTOR DVDR PX-716A\H3 T0 : Queue again later 11:00:42 PM #23 Text 0 File WriterStatus.cpp, Line 116 <PLEXTOR DVDR PX-716A > start writing Lead-Out at LBA 684896 (A7360h), lenght 0 blocks 11:00:42 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 11:00:42 PM #25 Text 0 File DVDR.cpp, Line 2774 EndDAO: Last written address was 684895 11:00:48 PM #26 Phase 181 File dlgbrnst.cpp, Line 1832 Writing lead-out... 11:01:14 PM #27 Phase 37 File dlgbrnst.cpp, Line 1832 Burn process completed successfully at 8x (11,080 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.189 , size=24832 bytes, created 11/17/2004 10:16:48 AM File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\atapi.sys': Ver=5.1.2600.1135 (xpsp2.020921-0842), size=87040 bytes, created 10/24/2002 3:59:48 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Bill Artman Bill Artman Photography, Inc. Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.16 Internal Version: 6, 6, 0, 16b (Nero Express) Recorder: <PLEXTOR DVDR PX-716A> Version: 1.08 - HA 3 TA 0 - 6.6.0.16 Adapter driver: <atapi> HA 3 Drive buffer : 8192kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <JLMS XJ-HD166S >Version: DGS3 - HA 3 TA 1 - 6.6.0.16 Adapter driver: <atapi> HA 3 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On DiskPeripheral : Maxtor 6B160P0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : PLEXTOR DVDR PX-716A atapi Port 3 ID 0 DMA: On CdRomPeripheral : JLMS XJ-HD166S atapi Port 3 ID 1 DMA: On === CDRom-Device-Map === PLEXTOR DVDR PX-716A E: CDRom0 JLMS XJ-HD166S F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 2046MB (2095852kB) Free physical memory: 1579MB (1617624kB) Memory in use : 22 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.8.2005 UDF/ISO compilation 11:03:46 PM #1 Text 0 File Isodoc.cpp, Line 6356 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : TRUE Multisession type: : Continue multisession Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 11:03:46 PM #2 Text 0 File Reader.cpp, Line 127 Reader running 11:03:46 PM #3 Text 0 File Writer.cpp, Line 122 Writer PLEXTOR DVDR PX-716A running 11:03:46 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 11:03:46 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 11:03:46 PM #6 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 11:03:47 PM #7 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 588719 (130:49.44, 1149MB) 11:03:47 PM #8 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 11:03:47 PM #9 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: PLEXTOR DVDR PX-716A, Media type: DVD-R Disc Manufacturer: MCC 02 - RG20 Disc Application Code: 64, Disc Physical Code: 193 11:03:47 PM #10 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:03:47 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 122272 (122272) = #122272/27:10.22 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 122272 blocks [PLEXTOR DVDR PX-716A] -------------------------------------------------------------- 11:03:47 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [PLEXTOR DVDR PX-716A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 2 to 2: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 250413056, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 466448 | lead-in | 0 | 0x41 | 0x00 466448 | 2 | 0 | 0x41 | 0x00 466448 | 2 | 1 | 0x41 | 0x00 588720 | lead-out | 1 | 0x41 | 0x00 11:03:47 PM #13 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 11:03:47 PM #14 Text 0 File Burncd.cpp, Line 4120 Cache writing successful. 11:03:47 PM #15 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 11:03:47 PM #16 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 8x (11,080 KB/s) 11:03:47 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #466448 11:03:47 PM #18 Text 0 File DVDR.cpp, Line 2379 Recording mode: Sequential Recording Mode for Multisession 11:03:47 PM #19 Text 0 File Mmc.cpp, Line 21708 Set BUFE: BURN-Proof -> ON 11:03:47 PM #20 Text 0 File DVDR.cpp, Line 2534 Start write address at LBA 466448 DVD high compatibility mode: Yes 11:03:47 PM #21 Text 0 File Cdrdrv.cpp, Line 8862 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 9ADFF h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 9AE10 h Start sector number of the next Border-In: A1DB0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 09 AE 10 00 0A 1D B0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 11:03:49 PM #22 Text 0 File Cdrdrv.cpp, Line 1286 23:03:49.765 - PLEXTOR DVDR PX-716A\H3 T0 : Queue again later 11:04:39 PM #23 Text 0 File WriterStatus.cpp, Line 116 <PLEXTOR DVDR PX-716A > start writing Lead-Out at LBA 588720 (8FBB0h), lenght 0 blocks 11:04:39 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 11:04:39 PM #25 Text 0 File DVDR.cpp, Line 2774 EndDAO: Last written address was 588719 11:04:45 PM #26 Phase 181 File dlgbrnst.cpp, Line 1832 Writing lead-out... 11:05:12 PM #27 Phase 37 File dlgbrnst.cpp, Line 1832 Burn process completed successfully at 8x (11,080 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.189 , size=24832 bytes, created 11/17/2004 10:16:48 AM File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\atapi.sys': Ver=5.1.2600.1135 (xpsp2.020921-0842), size=87040 bytes, created 10/24/2002 3:59:48 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Bill Artman Bill Artman Photography, Inc. Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.16 Internal Version: 6, 6, 0, 16b (Nero Express) Recorder: <PLEXTOR DVDR PX-716A> Version: 1.08 - HA 3 TA 0 - 6.6.0.16 Adapter driver: <atapi> HA 3 Drive buffer : 8192kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <JLMS XJ-HD166S >Version: DGS3 - HA 3 TA 1 - 6.6.0.16 Adapter driver: <atapi> HA 3 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On DiskPeripheral : Maxtor 6B160P0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : PLEXTOR DVDR PX-716A atapi Port 3 ID 0 DMA: On CdRomPeripheral : JLMS XJ-HD166S atapi Port 3 ID 1 DMA: On === CDRom-Device-Map === PLEXTOR DVDR PX-716A E: CDRom0 JLMS XJ-HD166S F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 2046MB (2095852kB) Free physical memory: 1580MB (1618040kB) Memory in use : 22 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.8.2005 UDF/ISO compilation 11:07:21 PM #1 Text 0 File Isodoc.cpp, Line 6356 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : TRUE Multisession type: : Continue multisession Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 11:07:21 PM #2 Text 0 File Reader.cpp, Line 127 Reader running 11:07:21 PM #3 Text 0 File Writer.cpp, Line 122 Writer PLEXTOR DVDR PX-716A running 11:07:21 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 11:07:21 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 11:07:21 PM #6 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 11:07:22 PM #7 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 576495 (128:06.45, 1125MB) 11:07:22 PM #8 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 11:07:22 PM #9 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: PLEXTOR DVDR PX-716A, Media type: DVD-R Disc Manufacturer: MCC 02 - RG20 Disc Application Code: 64, Disc Physical Code: 193 11:07:22 PM #10 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:07:22 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 86896 (86896) = #86896/19:18.46 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 86896 blocks [PLEXTOR DVDR PX-716A] -------------------------------------------------------------- 11:07:22 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [PLEXTOR DVDR PX-716A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 2 to 2: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 177963008, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 489600 | lead-in | 0 | 0x41 | 0x00 489600 | 2 | 0 | 0x41 | 0x00 489600 | 2 | 1 | 0x41 | 0x00 576496 | lead-out | 1 | 0x41 | 0x00 11:07:23 PM #13 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 11:07:23 PM #14 Text 0 File Burncd.cpp, Line 4120 Cache writing successful. 11:07:23 PM #15 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 11:07:23 PM #16 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 8x (11,080 KB/s) 11:07:23 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #489600 11:07:23 PM #18 Text 0 File DVDR.cpp, Line 2379 Recording mode: Sequential Recording Mode for Multisession 11:07:23 PM #19 Text 0 File Mmc.cpp, Line 21708 Set BUFE: BURN-Proof -> ON 11:07:23 PM #20 Text 0 File DVDR.cpp, Line 2534 Start write address at LBA 489600 DVD high compatibility mode: Yes 11:07:23 PM #21 Text 0 File Cdrdrv.cpp, Line 8862 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: A086F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: A0880 h Start sector number of the next Border-In: A7820 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 0A 08 80 00 0A 78 20 - 00 00 00 00 00 00 00 00 ......x......... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 11:07:25 PM #22 Text 0 File Cdrdrv.cpp, Line 1286 23:07:25.515 - PLEXTOR DVDR PX-716A\H3 T0 : Queue again later 11:08:09 PM #23 Text 0 File WriterStatus.cpp, Line 116 <PLEXTOR DVDR PX-716A > start writing Lead-Out at LBA 576496 (8CBF0h), lenght 0 blocks 11:08:09 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 11:08:09 PM #25 Text 0 File DVDR.cpp, Line 2774 EndDAO: Last written address was 576495 11:08:15 PM #26 Phase 181 File dlgbrnst.cpp, Line 1832 Writing lead-out... 11:08:42 PM #27 Phase 37 File dlgbrnst.cpp, Line 1832 Burn process completed successfully at 8x (11,080 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.189 , size=24832 bytes, created 11/17/2004 10:16:48 AM File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\atapi.sys': Ver=5.1.2600.1135 (xpsp2.020921-0842), size=87040 bytes, created 10/24/2002 3:59:48 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Bill Artman Bill Artman Photography, Inc. Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.16 Internal Version: 6, 6, 0, 16b (Nero Express) Recorder: <PLEXTOR DVDR PX-716A> Version: 1.08 - HA 3 TA 0 - 6.6.0.16 Adapter driver: <atapi> HA 3 Drive buffer : 8192kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <JLMS XJ-HD166S >Version: DGS3 - HA 3 TA 1 - 6.6.0.16 Adapter driver: <atapi> HA 3 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On DiskPeripheral : Maxtor 6B160P0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : PLEXTOR DVDR PX-716A atapi Port 3 ID 0 DMA: On CdRomPeripheral : JLMS XJ-HD166S atapi Port 3 ID 1 DMA: On === CDRom-Device-Map === PLEXTOR DVDR PX-716A E: CDRom0 JLMS XJ-HD166S F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 2046MB (2095852kB) Free physical memory: 1580MB (1618044kB) Memory in use : 22 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.8.2005 UDF/ISO compilation 11:11:38 PM #1 Text 0 File Isodoc.cpp, Line 6356 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : TRUE Multisession type: : Continue multisession Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 11:11:38 PM #2 Text 0 File Reader.cpp, Line 127 Reader running 11:11:38 PM #3 Text 0 File Writer.cpp, Line 122 Writer PLEXTOR DVDR PX-716A running 11:11:38 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 11:11:39 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 11:11:39 PM #6 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 11:11:39 PM #7 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 861007 (191:20.07, 1681MB) 11:11:39 PM #8 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 11:11:39 PM #9 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: PLEXTOR DVDR PX-716A, Media type: DVD-R Disc Manufacturer: MCC 02 - RG20 Disc Application Code: 64, Disc Physical Code: 193 11:11:39 PM #10 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:11:39 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 106848 (106848) = #106848/23:44.48 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 106848 blocks [PLEXTOR DVDR PX-716A] -------------------------------------------------------------- 11:11:39 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [PLEXTOR DVDR PX-716A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 2 to 2: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 218824704, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 754160 | lead-in | 0 | 0x41 | 0x00 754160 | 2 | 0 | 0x41 | 0x00 754160 | 2 | 1 | 0x41 | 0x00 861008 | lead-out | 1 | 0x41 | 0x00 11:11:41 PM #13 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 11:11:41 PM #14 Text 0 File Burncd.cpp, Line 4120 Cache writing successful. 11:11:41 PM #15 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 11:11:41 PM #16 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 8x (11,080 KB/s) 11:11:41 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #754160 11:11:41 PM #18 Text 0 File DVDR.cpp, Line 2379 Recording mode: Sequential Recording Mode for Multisession 11:11:41 PM #19 Text 0 File Mmc.cpp, Line 21708 Set BUFE: BURN-Proof -> ON 11:11:41 PM #20 Text 0 File DVDR.cpp, Line 2534 Start write address at LBA 754160 DVD high compatibility mode: Yes 11:11:41 PM #21 Text 0 File Cdrdrv.cpp, Line 8862 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: DEDDF h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: DEDF0 h Start sector number of the next Border-In: E8190 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 0D ED F0 00 0E 81 90 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 11:11:43 PM #22 Text 0 File Cdrdrv.cpp, Line 1286 23:11:43.984 - PLEXTOR DVDR PX-716A\H3 T0 : Queue again later 11:12:37 PM #23 Text 0 File WriterStatus.cpp, Line 116 <PLEXTOR DVDR PX-716A > start writing Lead-Out at LBA 861008 (D2350h), lenght 0 blocks 11:12:37 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 11:12:37 PM #25 Text 0 File DVDR.cpp, Line 2774 EndDAO: Last written address was 861007 11:12:43 PM #26 Phase 181 File dlgbrnst.cpp, Line 1832 Writing lead-out... 11:13:11 PM #27 Phase 37 File dlgbrnst.cpp, Line 1832 Burn process completed successfully at 8x (11,080 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.189 , size=24832 bytes, created 11/17/2004 10:16:48 AM File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\atapi.sys': Ver=5.1.2600.1135 (xpsp2.020921-0842), size=87040 bytes, created 10/24/2002 3:59:48 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Bill Artman Bill Artman Photography, Inc. Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.16 Internal Version: 6, 6, 0, 16b (Nero Express) Recorder: <PLEXTOR DVDR PX-716A> Version: 1.08 - HA 3 TA 0 - 6.6.0.16 Adapter driver: <atapi> HA 3 Drive buffer : 8192kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <JLMS XJ-HD166S >Version: DGS3 - HA 3 TA 1 - 6.6.0.16 Adapter driver: <atapi> HA 3 === Scsi-Device-Map === DiskPeripheral : Maxtor 6B160P0 atapi Port 0 ID 0 DMA: On DiskPeripheral : Maxtor 6B160P0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : PLEXTOR DVDR PX-716A atapi Port 3 ID 0 DMA: On CdRomPeripheral : JLMS XJ-HD166S atapi Port 3 ID 1 DMA: On === CDRom-Device-Map === PLEXTOR DVDR PX-716A E: CDRom0 JLMS XJ-HD166S F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 2046MB (2095852kB) Free physical memory: 1546MB (1583404kB) Memory in use : 24 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 28.8.2005 CD-ROM (ISO) 8:11:56 AM #1 Text 0 File Isodoc.cpp, Line 6356 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 8:11:56 AM #2 Text 0 File Burncd.cpp, Line 2948 PLEXTOR DVDR PX-716A BURN-Proof activated 8:11:56 AM #3 Text 0 File Reader.cpp, Line 127 Reader running 8:11:56 AM #4 Text 0 File Writer.cpp, Line 122 Writer PLEXTOR DVDR PX-716A running 8:11:56 AM #5 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 8:11:56 AM #6 Text 0 File Burncd.cpp, Line 3233 Turn on Track-At-Once, using CD-R/RW media 8:11:56 AM #7 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 359848 ( 79:59.73) Last address to be written: 228418 ( 50:47.43) 8:11:56 AM #8 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 8:11:56 AM #9 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: PLEXTOR DVDR PX-716A; CDR code: 00 97 27 58; OSJ entry from: Mitsui Chemicals, Inc. ATIP Data: Special Info [hex] 1: C0 00 B0, 2: 61 1B 3A (LI 97:27.58), 3: 4F 3B 4A (LO 79:59.74) Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid) 8:11:56 AM #10 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 8:11:56 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 228419 (228419) = #228419/50:45.44 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 228417 blocks [PLEXTOR DVDR PX-716A] -------------------------------------------------------------- 8:11:56 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [PLEXTOR DVDR PX-716A] for write in TAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 468109312, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0x00 -150 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 228419 | lead-out | 1 | 0x41 | 0x00 8:11:56 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1119 Removed 2 run-out blocks from end of track 1. Length: 228419 -> 228417. 8:11:56 AM #14 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 8:11:56 AM #15 Text 0 File Burncd.cpp, Line 4120 Cache writing successful. 8:11:56 AM #16 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 8:11:56 AM #17 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 48x (7,200 KB/s) 8:11:56 AM #18 SCSI -1189 File Cdrdrv.cpp, Line 1180 SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x036E6000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x02 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0xFF 0x40 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x02 8:11:56 AM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 8:11:56 AM #20 Text 0 File Mmc.cpp, Line 21708 Set BUFE: BURN-Proof -> ON 8:12:02 AM #21 Text 0 File Cdrdrv.cpp, Line 1286 08:12:02.807 - PLEXTOR DVDR PX-716A\H3 T0 : Queue again later 8:13:56 AM #22 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 8:14:02 AM #23 Text 0 File Mmc.cpp, Line 16352 <PLEXTOR DVDR PX-716A > start Close Session 8:15:39 AM #24 SCSI -1176 File Cdrdrv.cpp, Line 1180 SCSI Exec, HA 3, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x72 Sense Qual: 0x02 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x03 0x00 0x03 0x86 0x58 0x0A 0x00 0x00 0x00 0x00 0x72 0x02 8:15:39 AM #25 CDR -1176 File ThreadedTransferInterface.cpp, Line 1294 Session fixation error 8:15:39 AM #26 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 1294 Could not perform Fixation 8:15:39 AM #27 Text 0 File Mmc.cpp, Line 16352 <PLEXTOR DVDR PX-716A > start Close Session 8:15:39 AM #28 SCSI -400 File Cdrdrv.cpp, Line 1180 SCSI Exec, HA 3, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x27 Sense Qual: 0x00 CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x27 0x00 8:15:39 AM #29 CDR -400 File ThreadedTransferInterface.cpp, Line 1294 Unspecified target error 8:15:39 AM #30 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 1294 Could not perform Fixation 8:15:39 AM #31 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 48x (7,200 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.189 , size=24832 bytes, created 11/17/2004 10:16:48 AM File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\atapi.sys': Ver=5.1.2600.1135 (xpsp2.020921-0842), size=87040 bytes, created 10/24/2002 3:59:48 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Bill Artman Bill Artman Photography, Inc. Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.16 Internal Version: 6, 6, 0, 16b (Nero Express) Recorder: <PLEXTOR DVDR PX-716A> Version: 1.08 - HA 3 TA 0 - 6.6.0.16 Adapter driver: <atapi> HA 3 Drive buffer : 8192kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <JLMS XJ-HD166S >Version: DGS3 - HA 3 TA 1 - 6.6.0.16 Adapter driver: <atapi> HA 3 === Scsi-Device-Map === DiskPeripheral : Maxtor 6B160P0 atapi Port 0 ID 0 DMA: On DiskPeripheral : Maxtor 6B160P0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : PLEXTOR DVDR PX-716A atapi Port 3 ID 0 DMA: On CdRomPeripheral : JLMS XJ-HD166S atapi Port 3 ID 1 DMA: On === CDRom-Device-Map === PLEXTOR DVDR PX-716A E: CDRom0 JLMS XJ-HD166S F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 2046MB (2095852kB) Free physical memory: 1535MB (1571980kB) Memory in use : 24 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 28.8.2005 CD-ROM (ISO) 8:26:29 AM #1 Text 0 File Isodoc.cpp, Line 6356 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 8:26:29 AM #2 Text 0 File Burncd.cpp, Line 2948 PLEXTOR DVDR PX-716A BURN-Proof activated 8:26:29 AM #3 Text 0 File Reader.cpp, Line 127 Reader running 8:26:29 AM #4 Text 0 File Writer.cpp, Line 122 Writer PLEXTOR DVDR PX-716A running 8:26:29 AM #5 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 8:26:29 AM #6 Text 0 File Burncd.cpp, Line 3233 Turn on Track-At-Once, using CD-R/RW media 8:26:29 AM #7 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 359848 ( 79:59.73) Last address to be written: 228418 ( 50:47.43) 8:26:29 AM #8 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 8:26:29 AM #9 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: PLEXTOR DVDR PX-716A; CDR code: 00 97 27 58; OSJ entry from: Mitsui Chemicals, Inc. ATIP Data: Special Info [hex] 1: C0 00 B0, 2: 61 1B 3A (LI 97:27.58), 3: 4F 3B 4A (LO 79:59.74) Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid) 8:26:29 AM #10 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 8:26:29 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 228419 (228419) = #228419/50:45.44 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 228417 blocks [PLEXTOR DVDR PX-716A] -------------------------------------------------------------- 8:26:29 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [PLEXTOR DVDR PX-716A] for write in TAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 468109312, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0x00 -150 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 228419 | lead-out | 1 | 0x41 | 0x00 8:26:29 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1119 Removed 2 run-out blocks from end of track 1. Length: 228419 -> 228417. 8:26:29 AM #14 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 8:26:30 AM #15 Text 0 File Burncd.cpp, Line 4120 Cache writing successful. 8:26:30 AM #16 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 8:26:30 AM #17 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 48x (7,200 KB/s) 8:26:30 AM #18 SCSI -1189 File Cdrdrv.cpp, Line 1180 SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x036E6000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x02 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0xFF 0x40 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x02 8:26:30 AM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 8:26:30 AM #20 Text 0 File Mmc.cpp, Line 21708 Set BUFE: BURN-Proof -> ON 8:26:33 AM #21 Text 0 File Cdrdrv.cpp, Line 1286 08:26:33.635 - PLEXTOR DVDR PX-716A\H3 T0 : Queue again later 8:28:27 AM #22 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 8:28:32 AM #23 Phase 37 File dlgbrnst.cpp, Line 1832 Burn process completed successfully at 48x (7,200 KB/s) 8:28:32 AM #24 Phase 78 File dlgbrnst.cpp, Line 1832 Data verification started 8:28:35 AM #25 Text 0 File ThreadedTransferInterface.cpp, Line 1119 Removed 2 run-out blocks from end of track 1. Length: 228419 -> 228417. 8:30:28 AM #26 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 8:30:28 AM #27 Phase 80 File dlgbrnst.cpp, Line 1832 Data verification completed successfully Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.189 , size=24832 bytes, created 11/17/2004 10:16:48 AM File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\atapi.sys': Ver=5.1.2600.1135 (xpsp2.020921-0842), size=87040 bytes, created 10/24/2002 3:59:48 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ======
this is what denotes each section of log "====== *** Nero-Burning Rom, History File *** ======". just having a look at the last secton now. in the meantime there are other sections with serial numbers down the log, pls edit them out, they'll get stolen otherwise...
- edit out any references to your serial number - the burner has a problem with the discs. if my other suggestions don't help, ditch the Mitsui discs.. - i burn max 16x or 24x at a push - you have Roxio installed (CDR* driver on 1st line) and Nero's InCD. InCD is packet writing software. both Roxio and packet writing can interfere with standard Nero Burning Rom, so try uninstalling Roxio (you may need to google search for Roxio Zapper to fully uninstall Roxio). As to InCD, to get rid of it you have to uninstall Nero, uninstall completely via Nero's Clean Tools, then reinstall Nero WITHOUT intalling InCD
Creaky; Thanks for your reply - How do I edit my serial number to remove it after I have already posted the history log to the forum? Thank You!
Hello Creaky; I have a final question for you please. Per you suggestion, I have downloaded and used the Roxio Zapper to completely remove any lingering trace of Roxio. You say to also uninstall Nero completely using your described procedure and then reinstall WITHOUT InCD4 as that Nero software uses packet writing software. My question - if InCD4 is part of the Nero package/suite I would assume ?? that it should work with the other Nero suite components. Please give me your thoughts. Thanks very much for your help.
Most people probably don't use packet writing anymore. In my opinion its outdated. I don't know/concern myself so much about why certain things like this don't work together, as in time any potential conflicts get worked out by the companies
