Hi – wonder if you can help me with a dma/crc error. I’m using quite an old machine, running XP – it’s a Pentium 3, with 256 ram running at 864 Mhz. It did have a cd player and a cd re-writer. I’ve just bought a Liteon 18x DVD rewriter. I took the CD player out and replaced it with the DVD rewriter. As per the instructions, I set the DVD re-writer at the end of the wide multi section cable (IDE cable) – which was where the cd player was. Installation instructions suggested making the dvd rewriter the Master and the other drive the slave. I did this (this reversed the scenario I had when using the cd-rewriter and cd-player). I connected the audio and power, closed the box and booted up. Everything appeared fine. I have been trying to burn DVD-video files onto the disc. I’ve been successful once out of about 10 times. The same error occurs and I really don’t know what I should be doing to correct it. Any help possible? The fail log is pasted below. Thanks. Paul Reeves BRGS 4C87-2018-2005-477K-055X-4026-3571-CMA6* Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 12:06:00 ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32 NT-SPTI used Nero Version: 7.2.3.3 Internal Version: 7, 2, 3, 3 (Nero Express) Recorder: <LITE-ON DVDRW LH-18A1P> Version: GL05 - HA 1 TA 0 - 7.2.3.3 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ? Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder CD-ROM: <TOSHIBA DVD-ROM SD-R1002>Version: 1038 - HA 1 TA 1 - 7.2.3.3 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : LITE-ON DVDRW LH-18A1P atapi Port 1 ID 0 DMA: On CdRomPeripheral : TOSHIBA DVD-ROM SD-R1002 atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === TOSHIBA DVD-ROM SD-R1002 D: CDRom1 LITE-ON DVDRW LH-18A1P E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 40894464 (0) Byte BUFE : 0 Physical memory : 255MB (261688kB) Free physical memory: 68MB (70596kB) Memory in use : 73 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 2.1.2007 UDF/ISO compilation 15:55:31 #1 Phase 112 File dlgbrnst.cpp, Line 1730 DVD-Video files reallocation started 15:55:32 #2 Phase 114 File dlgbrnst.cpp, Line 1730 DVD-Video files reallocation completed (no file modified) 15:55:32 #3 Text 0 File Isodoc.cpp, Line 6427 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Options : automatic UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 15:55:32 #4 Phase 111 File dlgbrnst.cpp, Line 1730 DVD-Video files sorted 15:55:33 #5 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 39936KB of Memory 15:55:33 #6 Text 0 File Reader.cpp, Line 124 Reader running 15:55:33 #7 Text 0 File Writer.cpp, Line 113 Writer E: LITE-ON DVDRW LH-18A1P running 15:55:33 #8 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 15:55:33 #9 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 15:55:34 #10 Text 0 File Burncd.cpp, Line 3400 Turn on Disc-At-Once, using DVD media 15:55:34 #11 Text 0 File DlgWaitCD.cpp, Line 290 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2135343 (474:31.18, 4170MB) 15:55:34 #12 Text 0 File DlgWaitCD.cpp, Line 302 Write in overburning mode: NO (enabled: CD) 15:55:34 #13 Text 0 File DlgWaitCD.cpp, Line 2733 Recorder: LITE-ON DVDRW LH-18A1P, Media type: DVD-R Disc Manufacturer: CMC MA - G. AE1 Disc Application Code: 64, Disc Physical Code: 193 15:55:34 #14 Text 0 File DlgWaitCD.cpp, Line 474 >>> Protocol of DlgWaitCD activities: <<< ========================================= 15:55:34 #15 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2135344 (2135344) = #2135344/474:31.19 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2135344 blocks [E: LITE-ON DVDRW LH-18A1P] -------------------------------------------------------------- 15:55:34 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [E: LITE-ON DVDRW LH-18A1P] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4373184512, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2135344 | lead-out | 1 | 0x41 | 0x00 15:55:34 #17 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 15:55:34 #18 Phase 24 File dlgbrnst.cpp, Line 1730 Caching of files started 15:55:34 #19 Text 0 File Burncd.cpp, Line 4231 Cache writing successful. 15:55:34 #20 Phase 25 File dlgbrnst.cpp, Line 1730 Caching of files completed 15:55:34 #21 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 8x (11,080 KB/s) 15:55:35 #22 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 15:55:35 #23 Text 0 File DVDR.cpp, Line 2905 Recording mode: Sequential Recording Mode 15:55:35 #24 Text 0 File DVDR.cpp, Line 3061 Start write address at LBA 0 DVD high compatibility mode: Yes 15:55:35 #25 Text 0 File Cdrdrv.cpp, Line 8995 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 30 00 10 20 00 00 00 - 00 00 00 21 00 00 00 00 .0.........!.... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 15:56:13 #26 Text 0 File Cdrdrv.cpp, Line 1224 15:56:13.936 - E: LITE-ON DVDRW LH-18A1P : Queue again later 15:56:30 #27 SPTI -1502 File SCSIPassThrough.cpp, Line 291 E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1502) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x08 Sense Qual: 0x03 CDB Data: 0x2A 00 00 00 01 60 00 00 20 00 00 00 Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 08 03 Buffer x04e00000: Len x10000 0x00 00 01 BA 44 00 05 00 04 21 01 89 C3 F8 00 00 0x01 E0 07 EC 80 00 00 98 A1 67 D0 71 AE E6 DD 44 0x34 81 54 27 93 49 88 2D 39 3D B6 F8 23 31 04 DA 15:56:30 #28 CDR -1502 File Writer.cpp, Line 302 DMA-driver error, CRC error E: LITE-ON DVDRW LH-18A1P 15:56:30 #29 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 15:56:31 #30 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 15:56:31 #31 Text 0 File DVDR.cpp, Line 3301 EndDAO: Last written address was 351 15:58:36 #32 Phase 38 File dlgbrnst.cpp, Line 1730 Burn process failed at 8x (11,080 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 12:06:00 File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 11/03/2005 22:28:09 (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Hi pwrrwp 1st thing - edit out the serial # in the log - begins w/ 4C. Don't need someone else using it. Nero Version: 7.2.3.3 Nero can update an update - plus it's not fully recognizing the new LiteOn. It shows it as this - Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder The latest Nero is 7.5.0.9a We're both cd drives working ok just before you swapped one with the LiteOn? Did you change the jumper pins on both drives to match how they're connected on the ide cable? Try uninstaling the ide channel (secondary) in device manager - no go then uninstall the burner in device manager. Here's a guide for DMA but you can follow this instructions on how to uninstall. Disc Manufacturer: CMC MA - G. AE1 Not the best discs by far. Better would be Verbatim or made in Japan Sony, Fuji or Maxell. Here's another good free burning program to try also if the above suggestions don't help - ImgBurn You would use the build mode to burn the video files.
