Decrypter fails to burn (it used to).... Optimal LO Data Zone Capacity 1483856 Optimal LO Data Zone Method ECC Block Boundary VOBU Boundary Filling Buffer. Writing LeadIn Nothing happens after that....except LED flashes on burner.... Any Ideas?
Log attached for review I 10:43:19 DVD Decrypter Version 3.5.1.0 started! I 10:43:19 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 10:43:19 Initialising SPTI... I 10:43:19 Searching for SCSI / ATAPI devices... I 10:43:19 Found 2 DVD-ROMs and 1 DVD±RW! I 10:43:19 Operation Started! I 10:43:19 Source File: C:\DVD NAME I 10:43:19 Source File Sectors: 2,961,088 (MODE1/2048) I 10:43:19 Source File Size: 6,064,308,224 bytes I 10:43:19 Destination Device: [1:1:0] DVDRW IDE 16X A071 (F (ATA) I 10:43:19 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D00-01) (Speeds: 1x) I 10:43:19 Destination Media Sectors: 4,173,824 I 10:43:19 Write Mode: DVD I 10:43:19 Write Speed: MAX I 10:43:19 Test Mode: No I 10:43:19 BURN-Proof: Enabled I 10:43:22 Optimal L0 Data Zone Capacity: 1,483,856 I 10:43:22 Optimal L0 Data Zone Method: ECC Block Boundary, VOBU Boundary I 10:43:22 Filling Buffer... I 10:43:22 Writing LeadIn...
sorry but had to ask is your burner a dual layer burner I'm sure tgere are two or three pple looking it up as i type but thought i would ask is this the complete log no errors!
try updating to the newest version of decrypter too~ you seem to have an older one..the newest one is 3.5.4.0
It looks like there's something missing from your log. It gets as far as the lead-in but that's it. If it completed with errors you should have those errors there, and if it completed successfully it should say that as well.
i've asked a mod to close petrol123's other 3 posts of the same thing as its a nightmare to track everything here was my bit from god knows which of the 4!- what drive is that ? i can see Quote: -------------------------------------------------------------------------------- DVDRW IDE 16X -------------------------------------------------------------------------------- which doesn't say a great deal! and firmware version Quote: -------------------------------------------------------------------------------- A071 -------------------------------------------------------------------------------- - so will have a search.... does this help - http://forums.afterdawn.com/thread_view.cfm/180855 ? cus first of all we need to verify the exact drive you have
Full Error Message: I 12:05:34 DVD Decrypter Version 3.5.1.0 started! I 12:05:34 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 12:05:34 Initialising SPTI... I 12:05:34 Searching for SCSI / ATAPI devices... I 12:05:34 Found 2 DVD-ROMs and 1 DVD±RW! I 12:05:34 Operation Started! I 12:05:34 Source File: C:\DVD Name.ISO I 12:05:34 Source File Sectors: 3,664,012 (MODE1/2048) I 12:05:34 Source File Size: 7,503,896,576 bytes I 12:05:34 Destination Device: [1:1:0] DVDRW IDE 16X A071 (F (ATA) I 12:05:34 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D00-01) (Speeds: 1x) I 12:05:34 Destination Media Sectors: 4,173,824 I 12:05:34 Write Mode: DVD I 12:05:34 Write Speed: MAX I 12:05:34 Test Mode: No I 12:05:34 BURN-Proof: Enabled I 12:05:34 Optimal L0 Data Zone Capacity: 1,832,032 I 12:05:34 Optimal L0 Data Zone Method: ECC Block Boundary, VOBU Boundary I 12:05:34 Filling Buffer... I 12:05:39 Writing LeadIn... E 13:16:53 Failed to Write Sectors 0 - 31 - Power Calibration Area Error I 13:16:53 Synchronising Cache... I 13:16:53 Closing Track... I 13:16:53 Finalising Disc... E 13:16:53 Failed to Write Image! E 13:16:53 Operation Failed! - Duration: 01:11:19 I 13:16:53 Average Write Rate: N/A - Maximum Write Rate: N/A Error On Screen: i/o Error Device: [1:1:0] DVDRW IDE 16xA071 (F (ATA) SCSI Status: 0x02 Intepretation: Check Condition CDB: 2A 00 00 00 00 00 00 00 20 00 Interpretation: Write (10)-Sectors: 0-31 Sense Area: 71 00 03 00 00 00 00 73 03 00 00 00 Interpretation: Power Calibration Area Error Retry Cancel
@petrol123 - is your drive a BTC DRW1016IM / DRW1116UI ?. If so, your firmware is quite old, and version A187 is available here, dated Aug 2004 - http://forum.rpc1.org/dl_firmware.php?download_id=1913 However not sure if that is your drive as a few other drives show in logfiles as being "DVDRW IDE 16X"
