X2.6CE won't boot Evox BIOS

Discussion in 'Xbox - Software discussion' started by MunkeyQ, Dec 9, 2006.

  1. MunkeyQ

    MunkeyQ Member

    Joined:
    Dec 9, 2006
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    11
    Hi, every, this might seem like a noob-ish question...

    I've just bought and successfully installed an Xecuter 2.6CE modchip. It boots FlashBIOS fine, so I made a BIOS flash CD and made a 1mb flash file using the Evox M7 BIOS.

    This apparently flashed fine, but now when I boot on either bank, I get the standard MS flubber screen. I can't get the original FlashBIOS or the Evox BIOS I flashed to it. Do I have to buy a programmer to recover it?

    The guide I followed said to use the X2 Bios Manager, which I did to create a 1mb file with the M7 BIOS loaded in all four banks. Any idea what I've done wrong?

    THanks in advance.
     
    MunkeyQ, Dec 9, 2006
    #1
  2. theridges

    theridges Guest

    yep you need the programmer, and use the 5035+ bios on the 2.6 why did you use an evox bios??
    pm me if you need the bios....
     
    Last edited by a moderator: Dec 9, 2006
    theridges, Dec 9, 2006
    #2
  3. MunkeyQ

    MunkeyQ Member

    Joined:
    Dec 9, 2006
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    11
    Ok then, thanks. Luckily the programmer isn't too pricey...
     
    MunkeyQ, Dec 9, 2006
    #3
  4. theridges

    theridges Guest

    no its not, pm me when you get it, i will send you the exact bios you need :)
     
    theridges, Dec 9, 2006
    #4

Share This Page