Hi guys Found a few similar threads on here but not quite the same, and none with a fix unfortuanetly so thought i would open it up to try and get my self a fix! Have put a Xecuter 2.6ce into a 1.6b xbox, everything went fine (have done many installs before) boots off bank 2 to the flashbios 3.03 screen no worries, however i cant get any response from the joystick!!! im using an original MS controller (the one that came with it) and i have nothing else plugged into the xbox, my eject buttons etc are working fine. I know the ports are ok as i turned the chip off and played a game no worries Any suggestions? a fix for this i will even do a $5 paypal transaction for your troubles
have you tried another controller or the other ports? Also this is a known symptom w/ flashbios 3.03 and newer v1.6B systems with Xtal systems with Samsung Ram. Since youve mentioned youve installed chips in the past, there are a few options for you: 1) use a programmer or pickup a programmer and flash the chip that way. 2) put your x2.6 LITE in another non v1.6B system and flash the chip 3) use a flashed chip on your current xbox and hotswap then flash. 4) if all else fails check the forums at: http://www.team-xecuter.com Hopefully this helps.
my programmer is broken atm thats why im looking to this forum! i tried all the ports but no luck unfortuanetly. i dont have another chip handy atm either so i may be out of luck till i can organize another programmer, thanks for the fast response, if anyone else has any idea's i will be happy to hear them thanks
