Hello, I have reading these forums for awhile and I got some really good information. well here is my problem. I just got a new chip (sp ice) and I got the chip installed and it works great but what do I do next ? Do I have to install a dashboard? If so which one is a good one.
The next step is to flash the Xenium with a hacked bios. A good bios for the Xenium is the X2 5035_16, this is the latest and greatest bios from TeamXecuter and it works perfect with the Spice, look for this bios on Xbins. Ok, you've installed the chip, flashed the bios, and now you can go ahead and remove the stock HD and install a larger HD plus the Evox 3935 dashboard. Everyone has different methods for flashing but I prefer to flash with the stock HD in to avoid error messages in case of a bad flash. Once you install the larger HD, make it easy on yourself by using Auto-Installer Deluxe 2.0 to format the HD and install the MS dash, Evox dash, and whatever apps and tools you prefer.
check out the xodus site the link is provided below. basically you put the bios you rename it BIOS.BINand add files to the cd either a dummy file or some large movie file to make the disk bigger to make it easier for your box to read after that burn it and flash the chip fromthe launch menu in any case for step by step instructings just og here http://www.teamxodus.com/modules.php?name=Downloads&d_op=viewdownload&cid=13
i dont really get the whole bios thing ive talked to people on xbl about chips but never really got anywhere i hear you can shoot bridges or spartans out of a gun in halo 2 so i would like some understanding in what it takes to do that or if its even possible?
