AfterDawn Forums

Achieving 1:1 FSB:DRAM on ASUS P5B-E

This discussion thread has 2 messages.

#1
Good day.

I was wondering what settings I have to apply in my Mother Board in order to achieve a 1:1 FSB:DRAM ratio without damaging my PC components.

Im currently using 4 x 2GB (8GB Total in Dual Channel) DRR-2 Kingston KHX6400D2/2G memory modules (99U5316-068.A00LF) 1.85V,
2.4GHZ Core 2 Duo E6600 Intel CPU (4MB Cache) and an ASUS P5B-E (Intel945 chipset) Mother Board with the latest BIOS.

All mother board settings are set to Auto and configure DRAM timing by SPD is Enabled.
Memory Remap feature in Enabled (Allow remapping of overlapped PCI memory above the total physical memory)
My mother board memory voltage can be set up to 2.10V
CPU Frequency when AI tuning is set to manual is at 266 and can range from 100 650
DRAM Frequency is set to auto but can reach up to 1066
PCI Express Frequency is Auto but can reach up to 104
CPU VCORE voltage can reach up to 1.5250V
FSB Termination Voltage can reach up to 1.450V
PCI Clock Synchronization mode can be set to 33.33MHZ
The CPU FSB is 1066
CPU Ratio setting is Auto
Ratio Status is unlocked and can range Max 09.0 Min 06.0
Ratio Actual Value: 9

This is what CPU-Z is currently showing:

CPU when idle:



CPU in full load when playing RAGE.



My mother board:



My memory:





Thanks in advance.
▼▼ This topic has 1 answers - they are below this advertisement ▼▼
AfterDawn Advertisement
#2
could try ddr2 1066 ram but supposedly your board can't run 1066 ram, only 800 & below.
Dual-channel DDR2 800/667/533
http://www.asus.com/Motherboards/Intel_...#specifications
This discussion thread has been automatically closed, as it hasn't received any new posts during the last 180 days. This means that you can't post replies or new questions to this discussion thread.

If you have something to add to this topic, use this page to post your question or comments to a new discussion thread.