Hi, Bought and installed new kryptview box yesterday & was working fine. Now appear to have lost all channels, it's saying scrambled or no video. Do I have to input codes, if so how do I do this,the same as the starview box we used to have or should it do it automatically. Any help would be much appreciated.
i have the same problem my box has worked fine for months now it dont tried rescan only get free view no sky movies or anything
No, on NO account do you attempt to enter Starview codes into a Kryptview box! Go here - http://eko.4shared.com (Thank you for such an excellent place ryanmg) Download the following files from the Kryptview folder KRYPTViEW_aRNeT_loading_Instructions.zip KRYPTViEW_ArnEt_loader.exe Kryptview_04042008.zip Read and make sure you understand the instructions file before proceeding ... it's a fairly simple procedure
hi there i also have the kryptview box and have lost all channels so have downloaded firmware but do not know how to upload it onto my kryptview reciever. any help from anyone on doing this i would be gratefull. i am struggling with sending the firmware from my pc to the reciever. thanks all
is there any reason when the box has work very well indeed it just will not now show scrambled channels.done factory reset telewest ,network three tps for were i live so i have tried all three for area left the box on scrambled channel for hours no good tried next tp no good and so on get all the channel in right order like before epg find wat is supposed to be on but only getting pictures on bbc itv
Yes, the reason is that Virginmedia keeps changing the decryption codes. Check the following thread for the latest codes you need for TheBox http://forums.afterdawn.com/thread_view.cfm/528527
can anyone please help me i have the kryptview arnet 700c box and have had it for around 5 months now with no troubles at all. now all of a sudden i get no channels at all. have downloaded firmware for it but do not know how to get onto my digi box. any help on this would be great thanks
This eve I managed to install the latest firmware for the Kryptview box.I then reset it to facory default then done a scan.When it had completed ,I rebooted it and now have all the channels.I done this from advice found on this site. So if you have probs...read all the info relateing to the kryptview box and follow the instructions Thanks to all who pasted the advice etc
yes i can understand that but i am new to this game and do not know how to transfer data from pc to kryptview box. this is what i am struggling with. if you could help me i would be very gratefull. thanks
hi, just want to say a big thank you to this site. after much struggling have managed to download and re-scan my arnet box. it is now working well, hopefully it will last for a time now.
See my first post in this thread ... get the instruction file KRYPTViEW_aRNeT_loading_Instructions.zip from the site and read it ... it takes you through the procedure step-by-step
mr_smith ... do you own a Kryptview box or a Starview as I am unsure as to which you have. If you own a Kryptview Go here - http://eko.4shared.com Download the following files from the Kryptview folder KRYPTViEW_aRNeT_loading_Instructions.zip <<-- READ THIS FIRST !!! KRYPTViEW_ArnEt_loader.exe Kryptview_04042008.zip If you own a Starview Click the link below for the latest codes ...
hello the box is a kryptview arnet 700c i have now tried to upload firmware bought a usb to db9 r232 does not work tried switch off press start and switch box back on no joy just a message say not requested now i get messages saying the settings are wrong but go into device message and check settings are the same com1 115200 and so on but no joy is it because im runnig vista or am i thick
It would appear that the reason you are receiving an error message is that you have the wrong cable ... the RS232 is not correct ... you need a NULL modem cable like this
hi and thanks all for the information that has been put on here for my arnet kryptview box is back up and running like new. many thanks for all the help and support.
yes you are right but the connection on the back of the computer is female and the box male .i was told by some one on this site that usb to 232 it is newlink usb to serial adaptor i hope it is something just as stupid as that http://www.cabling4less.co.uk/Data_Cables.php?referrer=google&gclid=CIvRzcb02JICFQ6tQwodQTWh_g http://www.cabling4less.co.uk/index.php?pageLayoutId=19 would this be ok do you think missing me footy