Alright guys, I have tried just about everything in other forums for the past week and I'm not getting anywhere. I/O error! Device: [1:0:0] Nec DVD+RW ND-1100A 108B (d Scsistatus: 0x02 Interpertation: check condition CDB: 2A 00 00 00 00 00 00 00 10 00 Interpertation: Write(10) - Sectors: 0 - 15 Sense Area: 70 00 03 00 00 0A 00 0C 00 00 00 Interpertation: Write Error I 11:59:29 Operation Started! I 11:59:29 Source File: Cocuments and SettingsJPDesktopStarskySTARSKY_AND_HUTCH.ISO I 11:59:29 Source File Sectors: 2,232,600 (MODE1/2048) I 11:59:29 Source File Size: 4,572,364,800 bytes I 11:59:29 Destination Device: [1:0:0] _NEC DVD+RW ND-1100A 108B (D I 11:59:29 Destination Media Type: DVD+R (Speeds: 2.4x) I 11:59:29 Destination Media Sectors: 2,294,304 I 11:59:29 Write Mode: DVD I 11:59:29 Write Speed: MAX I 11:59:29 Test Mode: No I 11:59:29 BURN-Proof: Enabled I 11:59:29 Filling Buffer... I 11:59:29 Writing LeadIn... E 11:59:33 Failed to Write Sectors 0 - 15 - Write Error I 11:59:33 Synchronising Cache... I 11:59:33 Closing Track... I 11:59:33 Finalising Disc... E 11:59:33 Failed to Write Image! E 11:59:33 Operation Failed! - Duration: 00:00:04 I 11:59:33 Average Write Rate: N/A - Maximum Write Rate: N/A I'm also using Memorex 4x RW DVD+R Any ideas would be appreciated. Thanks
First guess - assuming the burner is fine, would be incompatible media. Found this http://forums.afterdawn.com/thread_view.cfm/10500 _X_X_X_X_X_[small]I don't know what I am doing.[/small]
Hi, It appears your burn is failing four seconds into the lead-in which oftentimes means it's either low quality media issue, burner incompatibility due to an out of date firmware or a combination of both. Did your NEC come with a Dell? Judging by the firmware revision listed in Decrypter's log your firmware is about two revisions behind. Firmware is important since the new versions improve media compatibility and write performance. I suspect the Memorex +R you're using are made by RICOHJPN but in order to make sure could you run both the Memorex and TDK discs through DVD Identifier and let us know the media ID for them? http://dvd.identifier.cdfreaks.com/
I always remember something else just as I hit the "reply" button! Is DMA enabled for your drive? http://www.microsoft.com/whdc/device/storage/IDE-DMA.mspx
[21:32:04] DVD+R/+RW Medium Detected. Starting Identification... [21:32:04] ** Initiating ADIP Retrieval Method 1 (Original ADIP) [21:32:04] ADIP Read M1 Failed : Illegal request - Invalid field in CDB [05/24/00] [21:32:04] ADIP Read Method 1 Not Supported ; A Firmware Upgrade Is Recommended [21:32:04] ** Initiating ADIP Retrieval Method 2 (Copy Of ADIP) [21:32:04] ADIP Read M2 Failed : Illegal request - Invalid field in CDB [05/24/00] [21:32:04] ADIP Read Method 2 Requires A Written DVD+R/+RW Disc [21:32:04] Disc Identification Did Not Complete Successfully I got this for both the memorex and TDK +R disc's when I ran DVD identifier. DMA is enabled for my drive. The NEC did come with a dell, but i took it from my friend and put it in my computer which has a intel pentium 4 2.40GHz 512 MB of RAM and a NTFS file system with windows XP pro.
Interesting........ Maybe try DVD Info Pro on the discs: http://www.dvdinfopro.com/ Could you check your ASPI layer for us with this tool: http://www.adaptec.com/worldwide/su...oduct/EZ-SCSI_5.0&filekey=aspichk.exe&sess=no
Results from dvd info pro: Media Information Region information N/A not a DVD-VIDEO Manufacturer ID cannot be read FormatCapacity 4.38GB(4.70GB) FreeBlocks 405405696 FreeCapacity 4.38GB(4.70GB) BookType Unknown MediaType DVD+R Media Id Code Speed Unknow Available Write Descriptor CLV 2.4x 3324KBps Data area end sector 23053Fh LinearDensity Blank Disc TrackDensity Unknown Number of Layers 1 Results from ASPI LOG0143: ***************************************************************** LOG0144: Starting ASPICHK installer on Wed Aug 11 22:33:22 2004 ASPICHK0438: OS = Windows NT (5.01.2600) UPGRADE1004: c:\windows\system32\wnaspi32.dll dated 06/11/1997 23:01:02, 30208 bytes. UPGRADE1101: Unable to get c:\windows\system32\wnaspi32.dll version info size 0x00000715 UPGRADE1004: c:\windows\system\winaspi.dll dated 10/22/1999 21:58:36, 4030 bytes. UPGRADE1101: Unable to get c:\windows\system\winaspi.dll version info size 0x00000714 UPGRADE1004: c:\windows\system32\drivers\aspi32.sys dated 09/10/1999 17:06:00, 25244 bytes. UPGRADE1062: c:\windows\system32\drivers\aspi32.sys version 4.6.0.1021 UPGRADE1004: c:\windows\system\wowpost.exe dated 09/10/1999 17:06:00, 4672 bytes. UPGRADE1062: c:\windows\system\wowpost.exe version 4.6.0.1021 ASPICHK0522: Inconsistent version numbers among components ASPICHK0592: ASPI installation has problems LOG0218: Closing installer log on Wed Aug 11 22:33:22 2004 LOG0219: *****************************************************************
I would try installing a new ASPI. I use this ForceASPI 1.8 and it works very well for me. http://forceaspi18.w.interia.pl/
I installed the ForceASPI 1.8 and it's still giving me the same error. But sometimes I'm getting the error about Power calibration.
i'm using dvddecrypter 3.2.3.0. trying to copy a dvd to the HD. i'm having a problem like grandcd01. except that instead of Interpertation: Write(10) - Sectors: 0 - 15. i got Interpretation: Read (10) - Sector 1193664. the complete error message is this I/O Error! Device [1:0:0] SONY DVD-ROM DDU1621 S2.9(E ScsiStatus: 0x02 Interpretation: Check condition CDB: 28 00 00 12 36 C1 00 00 01 00 Interpretation: Read (10) - Sector 1193664 Sense Area: 70 00 05 00 00 00 00 0A 00 00 00 00 64 00 00 00 00 00 Interpretation: Illegal Mode for this Track in the bottom of the screen, there is a exclamation point in a yellow triangle followed by Failed to Read Sector 1193664 - Illegal Mode for this Track. if i click Ignore, then the some message will pop up, except the number is different. 1193665, 1193666, 1193667. i got the ASPI 4.71.2. i went to Tools/ Settings/ I/O and changed the Interface from SPTI to ASPI. dvddecrypter detect that i have aspi 4.71.2 but said that "No devices detected"
Power Calibration Error - that is a good sign that the media is at fault - it's either poor media or incompatible. There was a post above remarking on your Firmware - updating that can sort that problem. It's also good to keep the firmware up to date anyway. Be careful when flashing it - make sure you have the correct one before you do it. Check and double check.
http://forum.rpc1.org/dl_firmware.php?category=4&manufactor=23 This for NEC burners - unless someone has a better place to get them from. You need to match your Drive to the correct Firware. Download and extract the files to a folder on the Desktop. Run the little utility and away you go. NOTE: If you mess it up - something goes wrong etc etc the Drive could end up with permanent damage. I don't really know what policy is on this board as far as telling people to flash drives - You may be better to wait and see what someone with a bit more status on this board says. I wouldn't want you to kill the drive on my say so. Maybe someone can write you a really simple step by step on flashing an NEC drive.
