The program has been working perfactly till yesterday; now I am getting nothing but coasters. I reloaded the program and now it burns at 2.4 instead of 4rpm and I get this message Any thoght please advise. Linn Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 5/6/2002 10:01:14 AM ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/28/2004 3:51:12 PM Nero API version: 6.6.0.1 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom === Scsi-Device-Map === DiskPeripheral : ST340810A atapi Port 0 ID 0 DMA: On CdRomPeripheral : LITE-ON LTR-40125S atapi Port 1 ID 0 DMA: On CdRomPeripheral : VOBID InstantDrive CD 14 VOBID Port 2 ID 0 DMA: Off === CDRom-Device-Map === LITE-ON LTR-40125S D: CDRom0 VOBID InstantDrive CD G: CDRom1 PIONEER DVD-RW DVR-106D F: CDRom2 ======================= AutoRun : 0 Excluded drive IDs: WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 254MB (260528kB) Free physical memory: 115MB (118488kB) Memory in use : 54 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 3.12.2004 NeroAPI 12:36:58 AM #1 Text 0 File NeroBurnCommon.cpp, Line 66 Message file not found Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 5:07:32 PM File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 5/6/2002 10:01:08 AM File 'Drivers\PXHELP20.SYS': Ver=2.02.42a, size=17184 bytes, created 11/27/2003 11:04:54 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
i am also getting this error Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 5/6/2002 10:01:14 AM ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/28/2004 4:51:12 PM Nero API version: 6.6.0.1 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Recorder: <PIONEER DVD-RW DVR-106D>Version: 1.08 - HA 3 TA 0 - 6.6.0.1 Adapter driver: <> HA 3 Drive buffer : 2000kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === DiskPeripheral : ST340810A atapi Port 0 ID 0 DMA: On CdRomPeripheral : LITE-ON LTR-40125S atapi Port 1 ID 0 DMA: On CdRomPeripheral : VOBID InstantDrive CD 14 VOBID Port 2 ID 0 DMA: Off === CDRom-Device-Map === LITE-ON LTR-40125S D: CDRom0 VOBID InstantDrive CD G: CDRom1 PIONEER DVD-RW DVR-106D F: CDRom2 ======================= AutoRun : 0 Excluded drive IDs: WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 254MB (260528kB) Free physical memory: 76MB (77824kB) Memory in use : 70 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 3.12.2004 NeroAPI 1:20:16 PM #1 Phase 112 File APIProgress.cpp, Line 276 DVD-Video files reallocation started 1:20:19 PM #2 Phase 114 File APIProgress.cpp, Line 276 DVD-Video files reallocation completed (no file modified) 1:20:19 PM #3 Phase 111 File APIProgress.cpp, Line 276 DVD-Video files sorted 1:20:20 PM #4 Text 0 File Reader.cpp, Line 127 Reader running 1:20:20 PM #5 Text 0 File Writer.cpp, Line 122 Writer PIONEER DVD-RW DVR-106D running 1:20:20 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 1:20:20 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 1:20:20 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 1:20:21 PM #9 Text 0 File Burncd.cpp, Line 3117 Turn on Disc-At-Once, using DVD media 1:20:23 PM #10 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2090159 (464:28.59, 4082MB) 1:20:23 PM #11 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO 1:20:23 PM #12 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: PIONEER DVD-RW DVR-106D, Media type: DVD+R Disc Manufacturer ID: AML, Media Type ID: 001, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 1 1:20:23 PM #13 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 1:20:23 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 844 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2090160 (2090160) = #2090160/464:28.60 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2090160 blocks [PIONEER DVD-RW DVR-106D] -------------------------------------------------------------- 1:20:23 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1047 Prepare recorder [PIONEER DVD-RW DVR-106D] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4280647680, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2090160 | lead-out | 1 | 0x00 | 0x41 1:20:26 PM #16 Phase 24 File APIProgress.cpp, Line 276 Caching of files started 1:20:26 PM #17 Text 0 File Burncd.cpp, Line 4003 Cache writing successful. 1:20:26 PM #18 Phase 25 File APIProgress.cpp, Line 276 Caching of files completed 1:20:26 PM #19 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 2.4x (3,324 KB/s) 1:20:26 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2497 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 1:20:26 PM #21 Text 0 File Cdrdrv.cpp, Line 8281 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 1 h Disc Manufacturer ID: AML..... Media type ID: 001 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 01 41 4D 4C 00 00 - 00 00 00 30 30 31 00 38 ...AML.....001.8 23 54 37 13 02 4A 71 02 - 90 66 16 16 0B 0B 0A 0A #T7..Jq..f...... 01 1C 1E 0B 0C 12 12 01 - 00 00 00 00 00 00 00 00 ................ 1:20:26 PM #22 Text 0 File DVDPlusRW.cpp, Line 632 Start write address at LBA 0 DVD high compatibility mode: Yes 1:41:33 PM #23 Text 0 File WriterStatus.cpp, Line 116 <PIONEER DVD-RW DVR-106D> start writing Lead-Out at LBA 2090160 (1FE4B0h), lenght 0 blocks 1:41:33 PM #24 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 1:41:46 PM #25 SCSI -1106 File Cdrdrv.cpp, Line 1178 SCSI Exec, HA 3, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x03 CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x73 0x03 1:41:48 PM #26 CDR -1106 File ThreadedTransferInterface.cpp, Line 1800 Power calibration error 1:41:48 PM #27 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1800 Could not perform end of Disc-at-once 1:42:01 PM #28 SCSI -1106 File Cdrdrv.cpp, Line 1178 SCSI Exec, HA 3, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x03 CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x73 0x03 1:42:01 PM #29 Phase 127 File APIProgress.cpp, Line 276 Generating DVD high compatibility borders 1:42:01 PM #30 CDR -1106 File WriterStatus.cpp, Line 167 Power calibration error 1:42:01 PM #31 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 1:42:01 PM #32 Phase 38 File APIProgress.cpp, Line 276 Burn process failed at 2.4x (3,324 KB/s) 1:42:01 PM #33 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 1:42:01 PM #34 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 5:07:32 PM File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 5/6/2002 10:01:08 AM File 'Drivers\PXHELP20.SYS': Ver=2.02.42a, size=17184 bytes, created 11/27/2003 11:04:54 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Hi ya Linn, welcome to aD, Although I don't see right off where the error is in your first log - I do see a “Power Calibration Error” in the second log. A “Power Calibration Error” can be attributed to the Optical Components of a DVD Writer. It is also attributed to the use of a poor quality media. Two questions arise - First, Can you burn anything at all with your burners i.e., CD's of any nature OR DVD data files ? Second, What media are you using ? What exactly what were you trying to burn when the trouble ocurred ? Thanks, Pete
Thankyou! yes I can burn DVD's with Stomp Recordnow max. What I have been doing the last couple of days is backing up as a DVD format using DVD shrink then using STOMP to put those 2 files onto DVD. It is actually faster. this way but where I was able to do the encoding and writing at the same time. It crashes (coaster time) and this does this on any movie or region. I have been using Compusa DVD's but have switched to Sony DVD's. This is also copying from DVD to DVD or file to DVD (DVD incriptor). I hope this helps you some in resolving my problams. p.s. I reloaded an order verson of NERO, and still having the same problam. Will try maybe tomarou to over write it with the latest NERO. Any suggestions, let me know. Linn Thanks again
Linn, We're lucky enough to have a "Ahead" representive here at aD, I'll send him a note and see if he can stop by and have a look at your log. Meanwhile, do what you're doing and we'll try to get Nero going when he has some free time - remember, he has a full time job and he'll get here when he can - Pete
That first log file I've never seen before. But unless you cut out quite a lot of content, it would leave me to believe that our software failed to install properly, was corrupted by the installation of another software. The reason I say this is that it never even get's to the polling of the recorder or the settings. I would very highly recommend using the Nero Clean tool to uninstall our software from your system, and then install Nero 6.6.0.3 and NVE 3.0.1.14 and see if this resolves your issue, or at least provides a better log file to help diagnose the problem. Regards, Craig Ahead Software USA
To Pete and Craig Thanks for the great help finished checking it out early out this morning and everything is working perfectly now. Thanks for the assistance and keep uo the great work. LINN Thanks again
Hey LINN, Now that you're doing well, that doesn't mean it's time for you to up and Ski-dattle - this is a give and take kind of a deal - we had fun helping you, now, the next time, you get to have some fun yourself It's people like you who make this site work - You've seen how we work and you've seen that we had fun doing it - Now it's your turn, stop back when you're free and help someone else - You'll have fun and, a chance to learn some more, (teaching is a learning experience too you know) the people you help will appreciate it and it will make you feel better Then you'll have a chance to "Welcome" them into our little Club Take a few minutes and check out our opening page. We've got a ton"O"stuff here at aD – Checkout other forums, we have the "Safety Valve" a forum about anything – from "What's bugging you," "Where members come from" OR the best joke you've heard – OR, check out our forums on Digital Camcorders, Photography, Home Theater components, Games, p2p topics or even Cellular phones. We hope to see you around when you're NOT having problems to solve - You'll find us hanging out, over there by the water cooler, under the potted palm, chewing the fat and trying to help the next Newbie with the weight of the burning world upon their shoulders - We'll be lQQking for you - Sea ya soon, Pete :b)
i to have been suffering from this problem my error box appears saying burn error then reads burn process failed at 2.4x(3,324KB/s) then continues: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 19:18:06 Nero API version: 6.3.0.2 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Recorder: <_NEC DVD+RW ND-2100AD> Version: 1.26 - HA 3 TA 0 - 6.3.0.2 Adapter driver: <atapi> HA 3 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : ST3160021A atapi Port 0 ID 0 DMA: On CdRomPeripheral : _NEC DVD+RW ND-2100AD atapi Port 3 ID 0 DMA: On CdRomPeripheral : SAMSUNG DVD-ROM SD-616E atapi Port 3 ID 1 DMA: On === CDRom-Device-Map === _NEC DVD+RW ND-2100AD E: CDRom0 SAMSUNG DVD-ROM SD-616E F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 511MB (523568kB) Free physical memory: 312MB (320040kB) Memory in use : 38 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 7.1.2005 NeroAPI 20:39:40 #1 Phase 112 File APIProgress.cpp, Line 253 DVD-Video files reallocation started 20:39:40 #2 Phase 114 File APIProgress.cpp, Line 253 DVD-Video files reallocation completed (no file modified) 20:39:40 #3 Phase 111 File APIProgress.cpp, Line 253 DVD-Video files sorted 20:39:42 #4 Text 0 File Reader.cpp, Line 118 Reader running 20:39:42 #5 Text 0 File Writer.cpp, Line 124 Writer _NEC DVD+RW ND-2100AD running 20:39:42 #6 ISO9660GEN -11 File geniso.cpp, Line 3882 First writeable address = 0 (0x00000000) 20:39:42 #7 ISO9660GEN -11 File geniso.cpp, Line 3882 First writeable address = 0 (0x00000000) 20:39:43 #8 Text 0 File Burncd.cpp, Line 3101 Turn on Disc-At-Once, using DVD media 20:40:13 #9 Text 0 File DlgWaitCD.cpp, Line 240 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2286105 (508:01.30, 4465MB) 20:40:13 #10 Text 0 File DlgWaitCD.cpp, Line 245 Write in overburning mode: FALSE 20:40:13 #11 Text 0 File DlgWaitCD.cpp, Line 2085 Recorder: _NEC DVD+RW ND-2100AD, Media type: DVD+R 20:40:13 #12 Text 0 File DlgWaitCD.cpp, Line 406 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: unknown. Medium required by compilation: DVD+R/RW.) 20:40:13 #13 Text 0 File ThreadedTransferInterface.cpp, Line 779 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 2286106 (2286106) = #2286106/508:1.31 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286106 blocks [_NEC DVD+RW ND-2100AD] -------------------------------------------------------------- 20:40:13 #14 Text 0 File ThreadedTransferInterface.cpp, Line 948 Prepare recorder [_NEC DVD+RW ND-2100AD] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681945088, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2286106 | lead-out | 1 | 0x00 | 0x41 20:40:15 #15 Phase 24 File APIProgress.cpp, Line 253 Caching of files started 20:40:15 #16 Text 0 File Burncd.cpp, Line 4073 Cache writing successful. 20:40:15 #17 Phase 25 File APIProgress.cpp, Line 253 Caching of files completed 20:40:16 #18 Phase 36 File APIProgress.cpp, Line 253 Burn process started at 2.4x (3,324 KB/s) 20:40:16 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2264 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 20:40:16 #20 SCSI -1066 File Cdrdrv.cpp, Line 1171 SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x0C167000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x24 0x00 20:40:16 #21 SCSI -1066 File Cdrdrv.cpp, Line 1171 SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x0C165000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xFA 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x24 0x00 20:40:16 #22 SCSI -1066 File Cdrdrv.cpp, Line 1171 SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x0C165000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xFA 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x24 0x00 20:40:16 #23 Text 0 File DVDR.cpp, Line 4034 Drive: _NEC DVD+RW ND-2100AD Book Type request: DVD-ROM Changing the book type was finish with error code: 0 20:40:16 #24 Text 0 File DVDPlusRW.cpp, Line 564 Start write address at LBA 0 DVD high compatibility mode: Yes 20:40:32 #25 SCSI -1106 File Cdrdrv.cpp, Line 1431 SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x01570000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x03 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x73 0x03 20:40:32 #26 CDR -1106 File Writer.cpp, Line 301 Power calibration error 20:40:32 #27 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 20:40:32 #28 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 20:40:32 #29 Phase 127 File APIProgress.cpp, Line 253 Generating DVD high compatibility borders 20:40:32 #30 Phase 129 File APIProgress.cpp, Line 253 Generating DVD borders completed successfully 20:40:32 #31 SCSI -1066 File Cdrdrv.cpp, Line 1171 SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x0C165000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xFA 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x24 0x00 20:40:33 #32 Text 0 File DVDR.cpp, Line 4034 Drive: _NEC DVD+RW ND-2100AD Book Type request: DVD+R Changing the book type was finish with error code: 0 20:40:33 #33 Phase 38 File APIProgress.cpp, Line 253 Burn process failed at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.02.70a, size=20176 bytes, created 03/03/2004 01:02:00 (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) tried the above solution but is no good perhaps im doing somthing wrong, please help. i recently changed my dvd writer but i think it stopped working before that hard to tell cause the coincided with each other. p.s usually burns a lot faster than 2.4x any help would be greatly appreciated
mutlie, A "Power Calibration Error" can be attributed to the Optical Components of a DVD Writer. Translation: The laser can be dirty, out of alignment etc. Using crappy discs can also cause a "Power Calibration Error". Solution: 1. Change discs (use a better quality). 2. Use a lens-cleaning disc (available at any computer store) 3. Hook the drive up to a different PC to ascertain if it functions. If it doesn't function there - either send out for repair OR replace with a new drive. Since it is a NEC burner - I would recommend that you replacement it (if necessary) should the other solution suggestions fail - with a new drive as that NEC drive (mine too) suck big time. Get a burner that is truly a dual format, not one that claims to be a dual format but only burns +R media. Cheers, Pete
