I can't ftp to xbox

I know my xbox can properly communicate with my pc since I was playing on xboxconnect earlier. But for some reason, I can't get flashxp to connect to it.

Is it absolutely necessary to use the 192.168.0.1
ip address for your pc? If so, where would I change those settings?

I'm currently using 192.168.1.1. I tried changing it in the lan settings in Network Connections, and in the set up page for my router, but both resulted in me being unable to connect to the internet.

Also, I noticed the ip adress of the xbox is labled as 192.169.0.35 in EvoX. Does that matter any?

Any help appreciated.

 

Firstly, make sure you are running evox off your HDD...not a cd.

then:

You xbox IP: Set this to whatever you want. This is the IP you will type in FlashFXP to connect to.

Xbox Default Gateway: This address must be the exact same as your computers IP address.

Subnet MAsk: 255.255.255.0

---------------------------

Just make sure your xbox's default gateway is the same as your PC's IP.

Then OPen FlashFXP.

Go to the Quick Connect menu.

In the Server/URL box type your xbox's IP

User Name, type: xbox

Password, type: xbox

Make sure you plug in the crossover cable to your xbox, then power the xbox on. (If you power the xbox on before you plug in the cables it wont work.)

Make sure the xbox has booted up to the Evox Dash.

Click connect on FlashFXP.

That should do it, If it still doesnt work, then it could be the cables you are using. If you are not connected through a hub of some sort, and your cable goes directly from your pc to your xbox then you need a crossover cable.

 

How does one make sure one is booted up to Evol Dash?

Thanks for any reply.

 

The evox dash looks nothing like the regualar MS dash. You will know when you boot to it.


And just to be sure...here is a screenshot of Evox with the default skin applied.

http://vermeiden.sie.die.verwendung-von.crackz.at/evox-piccie-1.jpg

 

mine has a red emblem on the top left hand side which has a large X in it but it does say.. Evolution X V-3935
after the skin comes....

 

No, but it is easier.

 

No, but it is easier.

 

i was having the same problem so used these settings for my xbox...

IP=192.168.1.101
Subnet=255.255.255.0 (Leave it alone It SHOULD be set to this automaticly.)
Gateway=192.168.1.1


Use these settings for your pc

IP=192.168.1.100
Subnet=255.255.255.0
Gateway=192.168.1.1

PM me if these setting dont work

 

i was having the same problem so used these settings for my xbox...

IP=192.168.1.101
Subnet=255.255.255.0 (Leave it alone It SHOULD be set to this automaticly.)
Gateway=192.168.1.1


Use these settings for your pc

IP=192.168.1.100
Subnet=255.255.255.0
Gateway=192.168.1.1

PM me if these setting dont work

 

Thanks, spyder. Worked like a charm.

 

hi,
can you help me with my problem im trying to connect with a crossover cable i have avalaunch on a version 1.6 crystal xbox with xecuter 2 modchip and a 1.0mb flashed bios here are my settings can you help what am i doing wrong? : Pc
IP: 192.168.1.100
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1

Xbox Network

Type:
IP: 0.0.0.0
Line Status: 100/Full Duplex
Ethernet Mac Address 00:50:F2:4B:BE:E0
Setup Network: Yes
Use Static IP: Yes
IP: 192.168.1.101
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DNS: Leave Alone
DNS: Leave Alone
Setup Delay: 5
Ftping is also Enabled

The Crossover Cable Im Using is: http://www.futureshop.ca/catalog/pr...0&sku_id=0665000FS10044146&catid=&newdeptid=2

Is this a good one? please help!!!!

THANXS!!

 

Your settings are messed up...

Change your settings to this:

PC:
IP: 192.168.1.100
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
(your current PC settings are fine)


Xbox:
IP: 192.168.1.101
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.100

(Notice how the Xbox's Default Gateway needs to be the EXACT same as the PC's IP address!)
----------------------------------------


You also must have the crossover cable inserted BEFORE you turn your xbox on!


If this is your first time using Evox, and you are booting it off of a CD, then You will need to burn a new cd to change the xbox's settings.
I know you can go into the Evox settings and change stuff around, but it will not take efect, as it is trying to save your settings to the CD...and the xbox cannot write to a CD


So if you are booting off of a CD then:

A: Make a new Evox boot disk with the following in the network settings:
IP: 192.168.1.101
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.100

or


B: If you change your PC's IP address to: 192.168.1.1
Then your current Evox settings should work.
---------------------------------------------------


Once you have everything turned on, then:

Open FlashFXP

Click on the lightning bolt icon for the quick connect menu

For the address enter in you Xbox's IP address.

For username, enter: xbox
For password, enter: xbox

Click connect, and it should work!

 

thanxs alot man it worked!!

 

Whenever my xbox comes up, it takes me to a menu with x3 config and other tools. What do I have to do to be able to connect to pc or even install some type of dash?

 

Hello I am having the same problem as well. How do I create a disk using the setting on my CPU in the network connections:
IP Address: 192.168.0.226
Subnetmask: 255.255.255.0
Assigned by DHCP
This is really trying my patience. I would appreciate any help.

 

are u ftp'ed? i used this and worked like a charm. http://www.evilzmods.com/networking.htm

 

I will try. I think I may have had the wrong cord. you are the man or woman. I will let you know how it turned out soon.

 

The cord worked Thank you for all of your help. It took me 2 wks to figure it out but it worked. Thank You.

 

You are welcome, just help someone else out in turn...

 

im having the same problem as everyone else. however im trying to ftp through a evox boot disc.

the settings are:
IP: 192.168.1.200
Subnetmask: 255.255.255.0
DefaultGateway: 192.168.1.1

Can anyone please help.