Hi, I bought a DELL 9300 with Sony DVD+-RW DW-D56A as an optical drive. I have Nero 6.6 intalled and I can burn CD's with no problem. I tried burning a DVD for the first time and after choosing the file, the program gets busy; 3 to 4 seconds in to the burning, it stops and gives me "unspecified target error" and end the burning! What is wrong, I tried it with other programs and none of the other programs and burn a DVD either. Is it the blanck DVD that is not compatible?!I use Verbatim DVD +R Thanx The log error I get is as Follows: Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.70, size=45568 bytes, created 12/10/2001 5:32:34 PM ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM Nero version: 6.6.0.3 (Nero Express) Recorder: <SONY DVD+-RW DW-D56A> Version: PDS7 - HA 1 TA 0 - 6.6.0.3 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <EV5340Z SXV044S >Version: 1.0 - HA 2 TA 0 - 6.6.0.3 Adapter driver: <dtscsi> HA 2 === Scsi-Device-Map === DiskPeripheral : HTS726060M9AT00 atapi Port 0 ID 0 DMA: On CdRomPeripheral : SONY DVD+-RW DW-D56A atapi Port 1 ID 0 DMA: On CdRomPeripheral : EV5340Z SXV044S 1.0 dtscsi Port 2 ID 0 DMA: Off === CDRom-Device-Map === SONY DVD+-RW DW-D56A D: CDRom0 EV5340Z SXV044S E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1023MB (1047960kB) Free physical memory: 457MB (468368kB) Memory in use : 55 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 6.12.2005 ISO compilation 9:06:07 PM #1 Text 0 File Isodoc.cpp, Line 6168 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 9:06:07 PM #2 Text 0 File Reader.cpp, Line 127 Reader running 9:06:07 PM #3 Text 0 File Writer.cpp, Line 122 Writer SONY DVD+-RW DW-D56A running 9:06:07 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 9:06:07 PM #5 Text 0 File Burncd.cpp, Line 3151 Turn on Disc-at-once, using DVD media 9:06:07 PM #6 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 1127769 (250:36.69, 2202MB) 9:06:07 PM #7 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD) 9:06:07 PM #8 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: SONY DVD+-RW DW-D56A, Media type: DVD+R Disc Manufacturer ID: MCC, Media Type ID: 001, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 0 9:06:07 PM #9 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 9:06:07 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1127920 (1127920) = #1127920/250:38.70 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1127920 blocks [SONY DVD+-RW DW-D56A] -------------------------------------------------------------- 9:06:13 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1040 Prepare recorder [SONY DVD+-RW DW-D56A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2309980160, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1127920 | lead-out | 1 | 0x41 | 0x00 9:06:13 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 9:06:13 PM #13 Text 0 File Burncd.cpp, Line 4038 Cache writing successful. 9:06:13 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 9:06:13 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 2.4x (3,324 KB/s) 9:06:13 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2596 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 9:06:14 PM #17 Text 0 File Cdrdrv.cpp, Line 8315 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 0 h Disc Manufacturer ID: MCC..... Media type ID: 001 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 00 4D 43 43 00 00 - 00 00 00 30 30 31 00 38 ...MCC.....001.8 23 54 37 0A 02 5A 70 02 - C8 67 19 19 0A 0A 0E 0E #T7..Zp..g...... 01 1C 1E 0B 0C 12 12 01 - 00 00 00 00 00 00 00 00 ................ 9:06:14 PM #18 Text 0 File DVDPlusRW.cpp, Line 608 Start write address at LBA 0 DVD high compatibility mode: Yes 9:06:16 PM #19 SCSI -400 File Cdrdrv.cpp, Line 1430 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0B040000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x27 Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x27 0x00 9:06:16 PM #20 CDR -400 File Writer.cpp, Line 311 Unspecified target error 9:06:16 PM #21 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 9:06:16 PM #22 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 9:06:16 PM #23 Phase 127 File dlgbrnst.cpp, Line 1832 Generating DVD high compatibility borders 9:06:16 PM #24 Phase 129 File dlgbrnst.cpp, Line 1832 Generating DVD borders completed successfully 9:06:16 PM #25 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM File 'Drivers\ASPI32.SYS': Ver=4.70, size=17101 bytes, created 12/10/2001 5:29:42 PM File 'Drivers\PXHELP20.SYS': Ver=3.00.09a, size=46080 bytes, created 8/19/2005 6:00:00 PM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec) File 'Drivers\dtscsi.sys': Ver=?.?.?.?, size=223128 bytes, created 12/2/2005 9:19:07 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== GlueEater Senior Member _ 6. December 2005 @ 22:20 _ Send private message to this user Quote:Recorder: <SONY DVD+-RW DW-D56A> Version: PDS7 - HA 1 TA 0 - 6.6.0.3 Your Nero is out of date, current version is 6.6.0.18. Quote:CdRomPeripheral : EV5340Z SXV044S 1.0 dtscsi Port 2 ID 0 DMA: Off Your DMA is off, here is how you can switch it back in: http://www.burstcopy.com/dma/xp/ Quote:Finalize CD : FALSE Multisession : TRUE You havn't finalized your disc yet, a disc can't play until it's been finalized. Payam33 Newbie _ 6. December 2005 @ 23:26 _ Edit message I am having the same problem again after the DMA on and finalize CD. it wont start burning at all!!!! Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.70, size=45568 bytes, created 12/10/2001 5:32:34 PM ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM Nero version: 6.6.0.3 (Nero Express) Recorder: <SONY DVD+-RW DW-D56A> Version: PDS7 - HA 1 TA 0 - 6.6.0.3 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <EV5340Z SXV044S >Version: 1.0 - HA 2 TA 0 - 6.6.0.3 Adapter driver: <dtscsi> HA 2 === Scsi-Device-Map === DiskPeripheral : HTS726060M9AT00 atapi Port 0 ID 0 DMA: On CdRomPeripheral : SONY DVD+-RW DW-D56A atapi Port 1 ID 0 DMA: On CdRomPeripheral : EV5340Z SXV044S 1.0 dtscsi Port 2 ID 0 DMA: Off === CDRom-Device-Map === SONY DVD+-RW DW-D56A D: CDRom0 EV5340Z SXV044S E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1023MB (1047960kB) Free physical memory: 454MB (465212kB) Memory in use : 55 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 6.12.2005 ISO compilation 9:06:07 PM #1 Text 0 File Isodoc.cpp, Line 6168 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 9:06:07 PM #2 Text 0 File Reader.cpp, Line 127 Reader running 9:06:07 PM #3 Text 0 File Writer.cpp, Line 122 Writer SONY DVD+-RW DW-D56A running 9:06:07 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 9:06:07 PM #5 Text 0 File Burncd.cpp, Line 3151 Turn on Disc-at-once, using DVD media 9:06:07 PM #6 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 1127769 (250:36.69, 2202MB) 9:06:07 PM #7 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD) 9:06:07 PM #8 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: SONY DVD+-RW DW-D56A, Media type: DVD+R Disc Manufacturer ID: MCC, Media Type ID: 001, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 0 9:06:07 PM #9 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 9:06:07 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1127920 (1127920) = #1127920/250:38.70 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1127920 blocks [SONY DVD+-RW DW-D56A] -------------------------------------------------------------- 9:06:13 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1040 Prepare recorder [SONY DVD+-RW DW-D56A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2309980160, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1127920 | lead-out | 1 | 0x41 | 0x00 9:06:13 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 9:06:13 PM #13 Text 0 File Burncd.cpp, Line 4038 Cache writing successful. 9:06:13 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 9:06:13 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 2.4x (3,324 KB/s) 9:06:13 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2596 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 9:06:14 PM #17 Text 0 File Cdrdrv.cpp, Line 8315 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 0 h Disc Manufacturer ID: MCC..... Media type ID: 001 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 00 4D 43 43 00 00 - 00 00 00 30 30 31 00 38 ...MCC.....001.8 23 54 37 0A 02 5A 70 02 - C8 67 19 19 0A 0A 0E 0E #T7..Zp..g...... 01 1C 1E 0B 0C 12 12 01 - 00 00 00 00 00 00 00 00 ................ 9:06:14 PM #18 Text 0 File DVDPlusRW.cpp, Line 608 Start write address at LBA 0 DVD high compatibility mode: Yes 9:06:16 PM #19 SCSI -400 File Cdrdrv.cpp, Line 1430 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0B040000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x27 Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x27 0x00 9:06:16 PM #20 CDR -400 File Writer.cpp, Line 311 Unspecified target error 9:06:16 PM #21 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 9:06:16 PM #22 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 9:06:16 PM #23 Phase 127 File dlgbrnst.cpp, Line 1832 Generating DVD high compatibility borders 9:06:16 PM #24 Phase 129 File dlgbrnst.cpp, Line 1832 Generating DVD borders completed successfully 9:06:16 PM #25 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM File 'Drivers\ASPI32.SYS': Ver=4.70, size=17101 bytes, created 12/10/2001 5:29:42 PM File 'Drivers\PXHELP20.SYS': Ver=3.00.09a, size=46080 bytes, created 8/19/2005 6:00:00 PM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec) File 'Drivers\dtscsi.sys': Ver=?.?.?.?, size=223128 bytes, created 12/2/2005 9:19:07 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) alkohol Senior Member _ 7. December 2005 @ 01:27 _ Send private message to this user @Payam33 Your Nero log looks pretty clean, except a few minors. Quote:Nero version: 6.6.0.3 (Nero Express) Nero is old, update to the latest 6.6.0.18 (package #1 & #2 only) Quote:Multisession : TRUE Don't use Multisession, turn it off. It should be FALSE. Quote:Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x27 Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Even you're using top notch Verbatim media, try to get their 4X and 8X media or genuine Yuden and Maxell (made in japan). Keep in mind to burn at 4X only (that's the best and safest). Quote:9:06:16 PM #25 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 2.4x (3,324 KB/s) Again look at above reply, try to burn at 4X with high quality media like genuine Yuden, Verbatim (Advanced Azo) and Maxell (made in japan). Custom built: (Win XP PRO SP2), Intel R P4 2.66G CPU 2.67GHz Seagate 120GB Barracuda 7200.7 ATA100 7200RPM IDE HD, Kingston 1GB PC3200 400MHz DDR SONY DRU 710A (BYX5) Dual Layer DVD/CD Writer, Toshiba 16X DVD/CD-ROM Genuine Taiyo Yuden & FUJI 8X DVD+R "Made In Japan" (YUDEN000-T02-000) 700 plus and not even a single coaster MAXELL 8X DVD+R "Made In Japan" (Maxell-002-000) 400 plus on both movies & PS2 games... not even a single coaster Verbatim 8X & 16X DVD+R(MCC003&MCC004) 200 backed up beautifully, Verbatim DVD+R DL (Made In Singapore) 30 plus backed up flawlessly PS2 v9 Flip Top/Swap Magic 3.6 Plus, 55" Widescreen SONY HDTV Hi-Scan 1080, PHILIPS DVP642/37, SAMSUNG P241 My favorite brew at the moment: Heineken & Corona To Backup a DVD using DVD Decrypter, Nero Recode 2 & Nero Burning Rom by Alkohol http://forums.afterdawn.com/thread_view.cfm/256436 To enable/turn DMA back On by uninstalling its driver(s) by Alkohol http://forums.afterdawn.com/thread_view.cfm/260038 WHY you should NOT buy CMC MAG & other unknown media (high quality scans vs crap media) http://forums.afterdawn.com/thread_view.cfm/262544 This message has been edited since posting. Last time this message was edited on 7. December 2005 @ 01:28 GlueEater Senior Member _ 7. December 2005 @ 18:25 _ Send private message to this user This almost looks exactly like like the first log you posted, wait minute, this IS the exact same log you posted. YOu have to post the latest log or else I won't know how to help you. Payam33 Newbie _ 7. December 2005 @ 22:15 _ Edit message Here is the new log, by the way, how do I upgrade to the new version of Nero? (version 6.6.18, I really don't want version 7, too many problems with it) Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.70, size=45568 bytes, created 12/10/2001 5:32:34 PM ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM Nero version: 6.6.0.3 (Nero Express) Recorder: <SONY DVD+-RW DW-D56A> Version: PDS7 - HA 1 TA 0 - 6.6.0.3 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <SONY DVD+-RW DW-D56A >Version: PDS7 - HA 1 TA 0 - 6.6.0.3 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : HTS726060M9AT00 atapi Port 0 ID 0 DMA: On CdRomPeripheral : SONY DVD+-RW DW-D56A atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === SONY DVD+-RW DW-D56A D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1023MB (1047960kB) Free physical memory: 483MB (495316kB) Memory in use : 52 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 7.12.2005 ISO compilation 11:23:00 PM #1 Text 0 File Isodoc.cpp, Line 6168 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 11:23:00 PM #2 Text 0 File Reader.cpp, Line 127 Reader running 11:23:00 PM #3 Text 0 File Writer.cpp, Line 122 Writer SONY DVD+-RW DW-D56A running 11:23:00 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 11:23:00 PM #5 Text 0 File Burncd.cpp, Line 3151 Turn on Disc-at-once, using DVD media 11:23:00 PM #6 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 1127769 (250:36.69, 2202MB) 11:23:00 PM #7 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD) 11:23:00 PM #8 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: SONY DVD+-RW DW-D56A, Media type: DVD+R Disc Manufacturer ID: MCC, Media Type ID: 001, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 0 11:23:00 PM #9 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:23:00 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1127920 (1127920) = #1127920/250:38.70 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1127920 blocks [SONY DVD+-RW DW-D56A] -------------------------------------------------------------- 11:23:00 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1040 Prepare recorder [SONY DVD+-RW DW-D56A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2309980160, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1127920 | lead-out | 1 | 0x41 | 0x00 11:23:01 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 11:23:01 PM #13 Text 0 File Burncd.cpp, Line 4038 Cache writing successful. 11:23:01 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 11:23:01 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 2.4x (3,324 KB/s) 11:23:01 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2596 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 11:23:01 PM #17 Text 0 File Cdrdrv.cpp, Line 8315 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 0 h Disc Manufacturer ID: MCC..... Media type ID: 001 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 00 4D 43 43 00 00 - 00 00 00 30 30 31 00 38 ...MCC.....001.8 23 54 37 0A 02 5A 70 02 - C8 67 19 19 0A 0A 0E 0E #T7..Zp..g...... 01 1C 1E 0B 0C 12 12 01 - 00 00 00 00 00 00 00 00 ................ 11:23:01 PM #18 Text 0 File DVDPlusRW.cpp, Line 608 Start write address at LBA 0 DVD high compatibility mode: Yes 11:23:03 PM #19 SCSI -400 File Cdrdrv.cpp, Line 1430 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03460000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x27 Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x27 0x00 11:23:03 PM #20 CDR -400 File Writer.cpp, Line 311 Unspecified target error 11:23:03 PM #21 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 11:23:03 PM #22 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 11:23:03 PM #23 Phase 127 File dlgbrnst.cpp, Line 1832 Generating DVD high compatibility borders 11:23:03 PM #24 Phase 129 File dlgbrnst.cpp, Line 1832 Generating DVD borders completed successfully 11:23:03 PM #25 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM File 'Drivers\ASPI32.SYS': Ver=4.70, size=17101 bytes, created 12/10/2001 5:29:42 PM File 'Drivers\PXHELP20.SYS': Ver=3.00.09a, size=46080 bytes, created 8/19/2005 6:00:00 PM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) GlueEater Senior Member _ 7. December 2005 @ 22:37 _ Send private message to this user You just download it, I forget but I think it 'installs' itself. Here is the link to it. Remember to just download packets 1 and 2, DO NOT download packet 3. If 5 days later you come back w/ a problem, post your log and I see that you have packet 3, I will KILL myself. http://www.nero.com/nero6/enu/nero-up.php This message has been edited since posting. Last time this message was edited on 7. December 2005 @ 22:39 Payam33 Newbie _ 8. December 2005 @ 20:26 _ Edit message Upgraded to 6.6.18, STILL DON'T WORK!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! HERE IS THE LOG. Advertisement _ __ _ Payam33 Newbie _ 8. December 2005 @ 20:31 _ Edit message Here is the log: Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.70, size=45568 bytes, created 12/10/2001 5:32:34 PM ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.18 Internal Version: 6, 6, 0, 18e (Nero Express) Recorder: <SONY DVD+-RW DW-D56A> Version: PDS7 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <SONY DVD+-RW DW-D56A >Version: PDS7 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : HTS726060M9AT00 atapi Port 0 ID 0 DMA: On CdRomPeripheral : SONY DVD+-RW DW-D56A atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === SONY DVD+-RW DW-D56A D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1023MB (1047960kB) Free physical memory: 396MB (406192kB) Memory in use : 61 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 9.12.2005 ISO compilation 8:11:04 PM #1 Text 0 File Isodoc.cpp, Line 6359 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 8:11:04 PM #2 Text 0 File Reader.cpp, Line 127 Reader running 8:11:04 PM #3 Text 0 File Writer.cpp, Line 122 Writer SONY DVD+-RW DW-D56A running 8:11:04 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 8:11:04 PM #5 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 8:11:04 PM #6 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 1443055 (320:40.55, 2818MB) 8:11:04 PM #7 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 8:11:04 PM #8 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: SONY DVD+-RW DW-D56A, Media type: DVD+R Disc Manufacturer ID: MCC, Media Type ID: 001, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 0 8:11:04 PM #9 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 8:11:04 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1443056 (1443056) = #1443056/320:40.56 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1443056 blocks [SONY DVD+-RW DW-D56A] -------------------------------------------------------------- 8:11:04 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [SONY DVD+-RW DW-D56A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2955378688, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1443056 | lead-out | 1 | 0x41 | 0x00 8:11:04 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 8:11:07 PM #13 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 8:11:07 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 8:11:07 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 2.4x (3,324 KB/s) 8:11:07 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 8:11:07 PM #17 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 0 h Disc Manufacturer ID: MCC..... Media type ID: 001 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 00 4D 43 43 00 00 - 00 00 00 30 30 31 00 38 ...MCC.....001.8 23 54 37 0A 02 5A 70 02 - C8 67 19 19 0A 0A 0E 0E #T7..Zp..g...... 01 1C 1E 0B 0C 12 12 01 - 00 00 00 00 00 00 00 00 ................ 8:11:07 PM #18 Text 0 File DVDPlusRW.cpp, Line 659 Start write address at LBA 0 DVD high compatibility mode: Yes 8:11:10 PM #19 SCSI -400 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0C0F0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x27 Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x27 0x00 8:11:10 PM #20 CDR -400 File Writer.cpp, Line 311 Unspecified target error 8:11:10 PM #21 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 8:11:10 PM #22 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 8:11:10 PM #23 Phase 127 File dlgbrnst.cpp, Line 1832 Generating DVD high compatibility borders 8:11:10 PM #24 Phase 129 File dlgbrnst.cpp, Line 1832 Generating DVD borders completed successfully 8:11:10 PM #25 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM File 'Drivers\ASPI32.SYS': Ver=4.70, size=17101 bytes, created 12/10/2001 5:29:42 PM File 'Drivers\PXHELP20.SYS': Ver=3.00.09a, size=46080 bytes, created 8/19/2005 6:00:00 PM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Is this a dell notebook? You seem to have plenty mem left but do have a lot in use at time of burn. That leads me to think what are the processes runing that is using some of the 61% in use. Try enditall2 to shut down some of them right before attempting to burn.
