I'm having trouble backing up a copy of The Exorcism of Emily Rose. I have ripped and shrunk it using DVD Decrypter/Shrink with no problem, so I know it's a burning problem and not an encryption one. I now have an ISO image file on my hard drive that I'm trying to burn using Decrypter. I get the following error message from Decrypter... I/O Error! Device:[1:1:0]PHILIPS DVD+-RW DVD8631 GD30 (E (ATA) ScsiStatus: 0x02 Interpretation: Check Condition CDB: 2A 00 00 00 00 00 00 00 20 00 Interpretation: Write(10) - Sectors: 0 - 31 Sense Area: 70 00 05 00 00 00 00 12 00 00 00 00 21 02 00 00 00 00 00 01 02 03 04 05 Interpretation: Invalid Address For Write ...This is frustrating b/c I have done many DVD backups this way before. My firmware is up to date and I'm using Sony DVD-R 1x-8x discs...which have always worked fine in the past. Any help would be greatly appreciated. Thanks!
I have now also tried burning with Nero and that craps out as well. I have the Nero log file if that would help, but is there anything in it that I should delete before I post it?
here is the Nero log... Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero Version: 7.0.1.4 Internal Version: 7, 0, 1, 4 Recorder: <PHILIPS DVD+-RW DVD8631> Version: GD30 - HA 1 TA 1 - 7.0.1.4 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <TSSTcorp DVD-ROM TS-H352C>Version: DE02 - HA 1 TA 0 - 7.0.1.4 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : SAMSUNG SP0802N atapi Port 0 ID 0 DMA: Off CdRomPeripheral : TSSTcorp DVD-ROM TS-H352C atapi Port 1 ID 0 DMA: On CdRomPeripheral : PHILIPS DVD+-RW DVD8631 atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === TSSTcorp DVD-ROM TS-H352C D: CDRom0 PHILIPS DVD+-RW DVD8631 E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 509MB (522224kB) Free physical memory: 48MB (49380kB) Memory in use : 90 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 22.12.2005 Burn DVD Image 7:06:53 PM #1 Text 0 File ThreadedTransfer.cpp, Line 525 ReadBuffer-Pipe got 262144KB of Memory 7:06:53 PM #2 Text 0 File Reader.cpp, Line 124 Reader running 7:06:53 PM #3 Text 0 File Writer.cpp, Line 113 Writer E: PHILIPS DVD+-RW DVD8631 running 7:06:53 PM #4 Text 0 File Burncd.cpp, Line 3342 Turn on Disc-At-Once, using DVD media 7:06:54 PM #5 Text 0 File DlgWaitCD.cpp, Line 279 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2285998 (507:59.73, 4464MB) 7:06:54 PM #6 Text 0 File DlgWaitCD.cpp, Line 291 Write in overburning mode: NO (enabled: CD) 7:06:54 PM #7 Text 0 File DlgWaitCD.cpp, Line 2578 Recorder: PHILIPS DVD+-RW DVD8631, Media type: DVD-R Disc Manufacturer: SONY08 - D1 Disc Application Code: 64, Disc Physical Code: 193 7:06:54 PM #8 Text 0 File DlgWaitCD.cpp, Line 458 >>> Protocol of DlgWaitCD activities: <<< ========================================= 7:06:54 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 2285999 (2285999) = #2285999/507:59.74 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2285999 blocks [E: PHILIPS DVD+-RW DVD8631] -------------------------------------------------------------- 7:06:54 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [E: PHILIPS DVD+-RW DVD8631] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681725952, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2285999 | lead-out | 1 | 0x41 | 0x00 7:06:54 PM #11 Text 0 File SCSIPassThrough.cpp, Line 36 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 7:06:54 PM #12 Phase 24 File dlgbrnst.cpp, Line 1725 Caching of files started 7:06:54 PM #13 Text 0 File Burncd.cpp, Line 4176 Cache writing successful. 7:06:54 PM #14 Phase 25 File dlgbrnst.cpp, Line 1725 Caching of files completed 7:06:54 PM #15 Phase 36 File dlgbrnst.cpp, Line 1725 Burn process started at 8x (11,080 KB/s) 7:06:54 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2685 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 7:06:54 PM #17 Text 0 File DVDR.cpp, Line 2580 Recording mode: Sequential Recording Mode for Multisession 7:06:54 PM #18 Text 0 File MMC.cpp, Line 21611 Set BUFE: Buffer underrun protection -> ON 7:06:54 PM #19 Text 0 File DVDR.cpp, Line 2735 Start write address at LBA 0 DVD high compatibility mode: Yes 7:06:54 PM #20 Text 0 File Cdrdrv.cpp, Line 8411 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 7:08:56 PM #21 SPTI -1135 File SCSIPassThrough.cpp, Line 323 E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 0C Buffer x05510000: Len x10000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 7:08:56 PM #22 CDR -1135 File Writer.cpp, Line 302 Write error E: PHILIPS DVD+-RW DVD8631 7:08:56 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 7:08:59 PM #24 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 7:09:00 PM #25 Text 0 File DVDR.cpp, Line 2978 EndDAO: Last written address was -1 7:09:00 PM #26 Phase 133 File dlgbrnst.cpp, Line 1725 Writing short lead-out 7:09:14 PM #27 Phase 38 File dlgbrnst.cpp, Line 1725 Burn process failed at 8x (11,080 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 1:07:32 PM File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/24/2005 4:55:30 PM (Prassi/Veritas driver for win 2K) Registry Keys:
You have absolutely NO ram to play with, do not multitask whilst burning and you're trying to burn far too close to edge, reduce to around 4300. Now over to the experts for all the things I have missed.
just rushing as i need a shower, so apologies if i state something that's already been posted - firmware's up to date - http://forum.rpc1.org/dl_firmware.php?download_id=1978 However, just in case your burner's out of a known bad batch, see here - http://forums.afterdawn.com/thread_view.cfm/179003 - DMA needs to be ON, fix via this - http://home.comcast.net/~bbmayo/FAQ.htm - sufficient total memory but no free memory. you have to close down more programs prior to ALL dvd work/burning to free up more memory - 4464MB is burning too close to outer edge of discs. If you use DVD Shrink, set target size to 4300MB in Shrink's preferences thus avoiding outer edge and not sacrificing much space follow ALL suggestions - maybe try 4x
OK. I think the problem is with my crappy Philips 8631 drive. The firmware is up to date and the DMA is enabled. I ran the the Nero InfoTool and it recognized my drives and everything looked good there, but I started to put in blank Sony DVD-R's and it recognized the first one I put in there, so I tried others and it would say no disc inserted. I tried about 5 blank discs with no luck and then I put the original one back in that it did recognize this first time around, only this time it didn't and I got the no disc inserted message again. So it seems that my drive is pretty much dead. Any thoughts on this and any recommendations on a replacement drive?
I'm using an older NEC with great results. Here is a link to a newer model for only $41.99. http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=1647585&Sku=N27-1886 Burners have come a long way and the prices have come way down. Whatever you select, I would suggest gettting a DL burner, as when the media comes down, you will be ready. Most out there now are dual layer.
Help! I have been trying to decrypt the latest harry potter and i get a I/O Error msg that pops up...How can i fix it?
I am getting the same error message and have tried 4-5 times to backup this same movie. Any ideas on my problem cause My DVD burner is a Memorex dual layer...???
