I'm having trouble getting a stable overclock setting. My computer is: Abit KV7 Mobo Athlon XP 3000+ 1gig PC3200 DDR GeForce FX5500 256Mb Windows XP Pro Coolmax 400W Power Supply My heatsink is damn good, too. I'm not sure the brand or model, but it keeps my CPU temp at a pretty steady 51 degrees C. Right now all of the settings are default for the XP 3000+. The FSB speed is set at 166mhz, the ratio is 5:2:1, and the multiplier is at 13x. I can change any of the settings, including the multiplier, but I can't get anything stable. The best I got was I got the FSB to 175mhz (which put the CPU clock at 2.3ghz). I had to up the voltages on the CPU and the DDR just to get that setting to load Windows, but the computer rebooted after a couple minutes of use. Anyone have any idea what I can do?
As everyone else will tell you about your post., post it in the sticky designated for it. http://forums.afterdawn.com/thread_view.cfm/83263 Good luck.
I meant to post your question there. It would be to your insterest. Just copy what you have here and post it there. Simple as that. Good luck.
