1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

illegal disc problem with burning DVD

Discussion in 'Nero discussion' started by abdgismo, Oct 10, 2006.

Thread Status:
Not open for further replies.
  1. abdgismo

    abdgismo Member

    Joined:
    Oct 10, 2006
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    11
    Hello guys

    I have some problems when I burn memorex DVD with nero. It says illegal disc and could not perform start of Disc-at-once.

    Thx alot for your helps.

    There is log file.
    -------------------

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28.07.2004 16:51:12
    Nero version: 6.6.0.1 (Nero Express)
    Recorder: <_NEC DVD_RW ND-2510A> Version: 2.05 - HA 2 TA 0 - 6.6.0.1
    Adapter driver: <> HA 2
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <HL-DT-ST CD-ROM GCR-8520B>Version: 1.00 - HA 1 TA 0 - 6.6.0.1
    Adapter driver: <IdeChnDr> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST340824A IdeChnDr Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST CD-ROM GCR-8520B IdeChnDr Port 1 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B IdeChnDr Port 1 ID 1 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST CD-ROM GCR-8520 D: CDRom0
    HL-DT-ST CD-RW GCE-8160B E: CDRom1
    _NEC DVD_RW ND-2510A F: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523744kB)
    Free physical memory: 302MB (309612kB)
    Memory in use : 40 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    10.10.2006
    ISO compilation
    13:43:45 #1 Text 0 File Isodoc.cpp, Line 6165
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    13:43:45 #2 Text 0 File Reader.cpp, Line 127
    Reader running

    13:43:45 #3 Text 0 File Writer.cpp, Line 122
    Writer _NEC DVD_RW ND-2510A running

    13:43:46 #4 ISO9660GEN -11 File geniso.cpp, Line 3286
    First writeable address = 0 (0x00000000)

    13:43:46 #5 Text 0 File Burncd.cpp, Line 3117
    Turn on Disc-at-once, using DVD media

    13:43:46 #6 Text 0 File DlgWaitCD.cpp, Line 256
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2143823 (476:24.23, 4187MB)

    13:43:46 #7 Text 0 File DlgWaitCD.cpp, Line 268
    Write in overburning mode: NO (enabled: CD)

    13:43:46 #8 Text 0 File DlgWaitCD.cpp, Line 2309
    Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R
    Disc Manufacturer: RITEKG - 05
    Disc Application Code: 64, Disc Physical Code: 193

    13:43:46 #9 Text 0 File DlgWaitCD.cpp, Line 430
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    13:43:46 #10 Text 0 File ThreadedTransferInterface.cpp, Line 844
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2143824 (2143824) = #2143824/476:24.24
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2143824 blocks [_NEC DVD_RW ND-2510A]
    --------------------------------------------------------------

    13:43:48 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1047
    Prepare recorder [_NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4390551552, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2143824 | lead-out | 1 | 0x00 | 0x41

    13:43:49 #12 Phase 24 File dlgbrnst.cpp, Line 1853
    Caching of files started

    13:43:49 #13 Text 0 File Burncd.cpp, Line 4003
    Cache writing successful.

    13:43:49 #14 Phase 25 File dlgbrnst.cpp, Line 1853
    Caching of files completed

    13:43:49 #15 Phase 36 File dlgbrnst.cpp, Line 1853
    Burn process started at 4x (5.540 KB/s)

    13:43:49 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2497
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    13:43:50 #17 Text 0 File dlgbrnst.cpp, Line 1711
    Set remaining time: 13:18,906 (798906ms) -> OK

    13:43:50 #18 Text 0 File DVDR.cpp, Line 2027
    Recording mode: Sequential Recording Mode

    13:43:50 #19 Text 0 File Mmc.cpp, Line 20673
    Set BUFE: Buffer underrun protection -> ON

    13:43:50 #20 Text 0 File DVDR.cpp, Line 2168
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    13:43:50 #21 Text 0 File Cdrdrv.cpp, Line 8281
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0..............
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    13:43:50 #22 Text 0 File DVDR.cpp, Line 5656
    Book Type counter: 500, Book Type selected in EEPROM, command version 1

    13:43:50 #23 Text 0 File DVDR.cpp, Line 5656
    Book Type counter: 500, Book Type selected in EEPROM, command version 1

    13:43:50 #24 Text 0 File DVDR.cpp, Line 4877
    Drive: _NEC DVD_RW ND-2510A
    Book Type request: DVD-ROM
    Book Type setting not supported for the loaded disc type

    13:43:53 #25 Text 0 File Cdrdrv.cpp, Line 1284
    13:43:53.495 - _NEC DVD_RW ND-2510A\H2 T0 : Queue again later

    14:58:55 #26 Text 0 File WriterStatus.cpp, Line 116
    <_NEC DVD_RW ND-2510A > start writing Lead-Out at LBA 2143824 (20B650h), lenght 0 blocks

    14:58:55 #27 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    14:58:55 #28 Text 0 File DVDR.cpp, Line 2410
    EndDAO: Last written address was 2143823

    14:59:12 #29 Text 0 File DVDR.cpp, Line 5656
    Book Type counter: 500, Book Type selected in EEPROM, command version 1

    14:59:12 #30 Text 0 File DVDR.cpp, Line 4877
    Drive: _NEC DVD_RW ND-2510A
    Book Type request: DVD-ROM
    Book Type setting not supported for the loaded disc type

    14:59:12 #31 Text 0 File dlgbrnst.cpp, Line 1711
    Set remaining time: 0:00,000 (0ms) -> OK

    14:59:13 #32 Text 0 File dlgbrnst.cpp, Line 1711
    Set remaining time: 0:00,000 (0ms) -> OK

    14:59:13 #33 Phase 37 File dlgbrnst.cpp, Line 1853
    Burn process completed successfully at 4x (5.540 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 17.11.2005 19:19:28 (Prassi/Veritas driver for win 2K)
    File 'Drivers\IdeChnDr.sys': Ver=2.2.0.2126, 04/10/2002, size=93594 bytes, created 14.08.2002 01:00:00 (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    .
    .
    1A23-0009-0030-2315-8317-2811

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28.07.2004 16:51:12
    Nero version: 6.6.0.1 (Nero Express)
    Recorder: <_NEC DVD_RW ND-2510A> Version: 2.05 - HA 2 TA 0 - 6.6.0.1
    Adapter driver: <> HA 2
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <HL-DT-ST CD-ROM GCR-8520B>Version: 1.00 - HA 1 TA 0 - 6.6.0.1
    Adapter driver: <IdeChnDr> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST340824A IdeChnDr Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST CD-ROM GCR-8520B IdeChnDr Port 1 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B IdeChnDr Port 1 ID 1 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST CD-ROM GCR-8520 D: CDRom0
    HL-DT-ST CD-RW GCE-8160B E: CDRom1
    _NEC DVD_RW ND-2510A F: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523744kB)
    Free physical memory: 329MB (336896kB)
    Memory in use : 35 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    10.10.2006
    ISO compilation
    15:02:12 #1 Text 0 File Isodoc.cpp, Line 6165
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    15:02:12 #2 Text 0 File Reader.cpp, Line 127
    Reader running

    15:02:12 #3 ISO9660GEN -11 File geniso.cpp, Line 3286
    First writeable address = 0 (0x00000000)

    15:02:12 #4 Text 0 File Burncd.cpp, Line 3117
    Turn on Disc-at-once, using DVD media

    15:02:13 #5 Text 0 File DlgWaitCD.cpp, Line 256
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1606095 (356:54.45, 3136MB)

    15:02:13 #6 Text 0 File DlgWaitCD.cpp, Line 268
    Write in overburning mode: NO (enabled: CD)

    15:02:13 #7 Text 0 File DlgWaitCD.cpp, Line 2309
    Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R
    Disc Manufacturer: CMC MA - G. AM3
    Disc Application Code: 64, Disc Physical Code: 193

    15:02:13 #8 Text 0 File DlgWaitCD.cpp, Line 430
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    15:02:13 #9 Text 0 File ThreadedTransferInterface.cpp, Line 844
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 1606096 (1606096) = #1606096/356:54.46
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1606096 blocks [_NEC DVD_RW ND-2510A]
    --------------------------------------------------------------

    15:02:15 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1047
    Prepare recorder [_NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3289284608, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    1606096 | lead-out | 1 | 0x00 | 0x41

    15:02:15 #11 Phase 24 File dlgbrnst.cpp, Line 1853
    Caching of files started

    15:02:16 #12 Text 0 File Burncd.cpp, Line 4003
    Cache writing successful.

    15:02:16 #13 Phase 25 File dlgbrnst.cpp, Line 1853
    Caching of files completed

    15:02:16 #14 Phase 36 File dlgbrnst.cpp, Line 1853
    Burn process started at 2.4x (3.324 KB/s)

    15:02:16 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2497
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    15:02:16 #16 Text 0 File dlgbrnst.cpp, Line 1711
    Set remaining time: 16:44,634 (1004634ms) -> OK

    15:02:16 #17 Text 0 File DVDR.cpp, Line 2027
    Recording mode: Sequential Recording Mode

    15:02:16 #18 Text 0 File Mmc.cpp, Line 20673
    Set BUFE: Buffer underrun protection -> ON

    15:02:16 #19 Text 0 File DVDR.cpp, Line 2168
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    15:02:16 #20 Text 0 File Cdrdrv.cpp, Line 8281
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    15:02:16 #21 SCSI -1046 File Cdrdrv.cpp, Line 1178
    SCSI Exec, HA 2, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x18 0x81 0xD0 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x05

    15:02:16 #22 Text 0 File DVDR.cpp, Line 5656
    Book Type counter: 500, Book Type selected in EEPROM, command version 1

    15:02:16 #23 Text 0 File DVDR.cpp, Line 5656
    Book Type counter: 500, Book Type selected in EEPROM, command version 1

    15:02:16 #24 Text 0 File DVDR.cpp, Line 4877
    Drive: _NEC DVD_RW ND-2510A
    Book Type request: DVD-ROM
    Book Type setting not supported for the loaded disc type

    15:02:16 #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1702
    Illegal disc

    15:02:16 #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1702
    Could not perform start of Disc-at-once

    15:02:16 #27 Text 0 File dlgbrnst.cpp, Line 1711
    Set remaining time: 0:00,000 (0ms) -> OK

    15:02:16 #28 Phase 38 File dlgbrnst.cpp, Line 1853
    Burn process failed at 2.4x (3.324 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 17.11.2005 19:19:28 (Prassi/Veritas driver for win 2K)
    File 'Drivers\IdeChnDr.sys': Ver=2.2.0.2126, 04/10/2002, size=93594 bytes, created 14.08.2002 01:00:00 (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    .
    .
    1A23-0009-0030-2315-8317-2811

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28.07.2004 16:51:12
    Nero version: 6.6.0.1 (Nero Express)
    Recorder: <_NEC DVD_RW ND-2510A> Version: 2.05 - HA 2 TA 0 - 6.6.0.1
    Adapter driver: <> HA 2
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <HL-DT-ST CD-ROM GCR-8520B>Version: 1.00 - HA 1 TA 0 - 6.6.0.1
    Adapter driver: <IdeChnDr> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST340824A IdeChnDr Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST CD-ROM GCR-8520B IdeChnDr Port 1 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B IdeChnDr Port 1 ID 1 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST CD-ROM GCR-8520 D: CDRom0
    HL-DT-ST CD-RW GCE-8160B E: CDRom1
    _NEC DVD_RW ND-2510A F: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523744kB)
    Free physical memory: 300MB (307336kB)
    Memory in use : 41 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    10.10.2006
    ISO compilation
    15:12:42 #1 Text 0 File Isodoc.cpp, Line 6165
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    15:12:42 #2 Text 0 File Reader.cpp, Line 127
    Reader running

    15:12:42 #3 ISO9660GEN -11 File geniso.cpp, Line 3286
    First writeable address = 0 (0x00000000)

    15:12:42 #4 Text 0 File Burncd.cpp, Line 3117
    Turn on Disc-at-once, using DVD media

    15:12:43 #5 Text 0 File DlgWaitCD.cpp, Line 256
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1606095 (356:54.45, 3136MB)

    15:12:43 #6 Text 0 File DlgWaitCD.cpp, Line 268
    Write in overburning mode: NO (enabled: CD)

    15:12:43 #7 Text 0 File DlgWaitCD.cpp, Line 2309
    Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R
    Disc Manufacturer: CMC MA - G. AM3
    Disc Application Code: 64, Disc Physical Code: 193

    15:12:43 #8 Text 0 File DlgWaitCD.cpp, Line 430
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    15:12:43 #9 Text 0 File ThreadedTransferInterface.cpp, Line 844
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 1606096 (1606096) = #1606096/356:54.46
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1606096 blocks [_NEC DVD_RW ND-2510A]
    --------------------------------------------------------------

    15:12:44 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1047
    Prepare recorder [_NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3289284608, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    1606096 | lead-out | 1 | 0x00 | 0x41

    15:12:45 #11 Phase 24 File dlgbrnst.cpp, Line 1853
    Caching of files started

    15:12:45 #12 Text 0 File Burncd.cpp, Line 4003
    Cache writing successful.

    15:12:45 #13 Phase 25 File dlgbrnst.cpp, Line 1853
    Caching of files completed

    15:12:45 #14 Phase 36 File dlgbrnst.cpp, Line 1853
    Burn process started at 2.4x (3.324 KB/s)

    15:12:45 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2497
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    15:12:45 #16 Text 0 File dlgbrnst.cpp, Line 1711
    Set remaining time: 16:44,634 (1004634ms) -> OK

    15:12:45 #17 Text 0 File DVDR.cpp, Line 2027
    Recording mode: Sequential Recording Mode

    15:12:45 #18 Text 0 File Mmc.cpp, Line 20673
    Set BUFE: Buffer underrun protection -> ON

    15:12:45 #19 Text 0 File DVDR.cpp, Line 2168
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    15:12:45 #20 Text 0 File Cdrdrv.cpp, Line 8281
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    15:12:45 #21 SCSI -1046 File Cdrdrv.cpp, Line 1178
    SCSI Exec, HA 2, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x18 0x81 0xD0 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x05

    15:12:45 #22 Text 0 File DVDR.cpp, Line 5656
    Book Type counter: 500, Book Type selected in EEPROM, command version 1

    15:12:45 #23 Text 0 File DVDR.cpp, Line 5656
    Book Type counter: 500, Book Type selected in EEPROM, command version 1

    15:12:45 #24 Text 0 File DVDR.cpp, Line 4877
    Drive: _NEC DVD_RW ND-2510A
    Book Type request: DVD-ROM
    Book Type setting not supported for the loaded disc type

    15:12:45 #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1702
    Illegal disc

    15:12:45 #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1702
    Could not perform start of Disc-at-once

    15:12:45 #27 Text 0 File dlgbrnst.cpp, Line 1711
    Set remaining time: 0:00,000 (0ms) -> OK

    15:12:45 #28 Phase 38 File dlgbrnst.cpp, Line 1853
    Burn process failed at 2.4x (3.324 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 17.11.2005 19:19:28 (Prassi/Veritas driver for win 2K)
    File 'Drivers\IdeChnDr.sys': Ver=2.2.0.2126, 04/10/2002, size=93594 bytes, created 14.08.2002 01:00:00 (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    .
    .
    1A23-0009-0030-2315-8317-2811

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28.07.2004 16:51:12
    Nero version: 6.6.0.1 (Nero Express)
    Recorder: <_NEC DVD_RW ND-2510A> Version: 2.05 - HA 2 TA 0 - 6.6.0.1
    Adapter driver: <> HA 2
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <HL-DT-ST CD-ROM GCR-8520B>Version: 1.00 - HA 1 TA 0 - 6.6.0.1
    Adapter driver: <IdeChnDr> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST340824A IdeChnDr Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST CD-ROM GCR-8520B IdeChnDr Port 1 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B IdeChnDr Port 1 ID 1 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST CD-ROM GCR-8520 D: CDRom0
    HL-DT-ST CD-RW GCE-8160B E: CDRom1
    _NEC DVD_RW ND-2510A F: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523744kB)
    Free physical memory: 298MB (305500kB)
    Memory in use : 41 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    10.10.2006
    ISO compilation
    15:13:40 #1 Text 0 File Isodoc.cpp, Line 6165
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    15:13:40 #2 Text 0 File Reader.cpp, Line 127
    Reader running

    15:13:40 #3 ISO9660GEN -11 File geniso.cpp, Line 3286
    First writeable address = 0 (0x00000000)

    15:13:40 #4 Text 0 File Burncd.cpp, Line 3117
    Turn on Disc-at-once, using DVD media

    15:13:41 #5 Text 0 File DlgWaitCD.cpp, Line 256
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1606095 (356:54.45, 3136MB)

    15:13:41 #6 Text 0 File DlgWaitCD.cpp, Line 268
    Write in overburning mode: NO (enabled: CD)

    15:13:41 #7 Text 0 File DlgWaitCD.cpp, Line 2309
    Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R
    Disc Manufacturer: CMC MA - G. AM3
    Disc Application Code: 64, Disc Physical Code: 193

    15:13:41 #8 Text 0 File DlgWaitCD.cpp, Line 430
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    15:13:41 #9 Text 0 File ThreadedTransferInterface.cpp, Line 844
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 1606096 (1606096) = #1606096/356:54.46
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1606096 blocks [_NEC DVD_RW ND-2510A]
    --------------------------------------------------------------

    15:13:42 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1047
    Prepare recorder [_NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3289284608, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    1606096 | lead-out | 1 | 0x00 | 0x41

    15:13:42 #11 Phase 24 File dlgbrnst.cpp, Line 1853
    Caching of files started

    15:13:42 #12 Text 0 File Burncd.cpp, Line 4003
    Cache writing successful.

    15:13:42 #13 Phase 25 File dlgbrnst.cpp, Line 1853
    Caching of files completed

    15:13:42 #14 Phase 36 File dlgbrnst.cpp, Line 1853
    Burn process started at 1x (1.385 KB/s)

    15:13:43 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2497
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    15:13:43 #16 Text 0 File dlgbrnst.cpp, Line 1711
    Set remaining time: 40:04,122 (2404122ms) -> OK

    15:13:43 #17 Text 0 File DVDR.cpp, Line 2027
    Recording mode: Sequential Recording Mode

    15:13:43 #18 Text 0 File Mmc.cpp, Line 20673
    Set BUFE: Buffer underrun protection -> ON

    15:13:43 #19 Text 0 File DVDR.cpp, Line 2168
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    15:13:43 #20 Text 0 File Cdrdrv.cpp, Line 8281
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    15:13:43 #21 SCSI -1046 File Cdrdrv.cpp, Line 1178
    SCSI Exec, HA 2, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x18 0x81 0xD0 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x05

    15:13:43 #22 Text 0 File DVDR.cpp, Line 5656
    Book Type counter: 500, Book Type selected in EEPROM, command version 1

    15:13:43 #23 Text 0 File DVDR.cpp, Line 5656
    Book Type counter: 500, Book Type selected in EEPROM, command version 1

    15:13:43 #24 Text 0 File DVDR.cpp, Line 4877
    Drive: _NEC DVD_RW ND-2510A
    Book Type request: DVD-ROM
    Book Type setting not supported for the loaded disc type

    15:13:43 #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1702
    Illegal disc

    15:13:43 #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1702
    Could not perform start of Disc-at-once

    15:13:43 #27 Text 0 File dlgbrnst.cpp, Line 1711
    Set remaining time: 0:00,000 (0ms) -> OK

    15:13:43 #28 Phase 38 File dlgbrnst.cpp, Line 1853
    Burn process failed at 1x (1.385 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 17.11.2005 19:19:28 (Prassi/Veritas driver for win 2K)
    File 'Drivers\IdeChnDr.sys': Ver=2.2.0.2126, 04/10/2002, size=93594 bytes, created 14.08.2002 01:00:00 (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    .
    .
    1A23-0009-0030-2315-8317-2811

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28.07.2004 16:51:12
    Nero version: 6.6.0.1 (Nero Express)
    Recorder: <_NEC DVD_RW ND-2510A> Version: 2.05 - HA 2 TA 0 - 6.6.0.1
    Adapter driver: <> HA 2
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <HL-DT-ST CD-ROM GCR-8520B>Version: 1.00 - HA 1 TA 0 - 6.6.0.1
    Adapter driver: <IdeChnDr> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST340824A IdeChnDr Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST CD-ROM GCR-8520B IdeChnDr Port 1 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B IdeChnDr Port 1 ID 1 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST CD-ROM GCR-8520 D: CDRom0
    HL-DT-ST CD-RW GCE-8160B E: CDRom1
    _NEC DVD_RW ND-2510A F: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523744kB)
    Free physical memory: 274MB (281520kB)
    Memory in use : 46 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    10.10.2006
    ISO compilation
    15:27:15 #1 Text 0 File Isodoc.cpp, Line 6165
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    15:27:15 #2 Text 0 File Reader.cpp, Line 127
    Reader running

    15:27:15 #3 ISO9660GEN -11 File geniso.cpp, Line 3286
    First writeable address = 0 (0x00000000)

    15:27:15 #4 Text 0 File Burncd.cpp, Line 3117
    Turn on Disc-at-once, using DVD media

    15:27:16 #5 Text 0 File DlgWaitCD.cpp, Line 256
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1606095 (356:54.45, 3136MB)

    15:27:16 #6 Text 0 File DlgWaitCD.cpp, Line 268
    Write in overburning mode: NO (enabled: CD)

    15:27:16 #7 Text 0 File DlgWaitCD.cpp, Line 2309
    Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R
    Disc Manufacturer: CMC MA - G. AM3
    Disc Application Code: 64, Disc Physical Code: 193

    15:27:16 #8 Text 0 File DlgWaitCD.cpp, Line 430
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    15:27:16 #9 Text 0 File ThreadedTransferInterface.cpp, Line 844
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 1606096 (1606096) = #1606096/356:54.46
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1606096 blocks [_NEC DVD_RW ND-2510A]
    --------------------------------------------------------------

    15:27:17 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1047
    Prepare recorder [_NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3289284608, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    1606096 | lead-out | 1 | 0x00 | 0x41

    15:27:18 #11 Phase 24 File dlgbrnst.cpp, Line 1853
    Caching of files started

    15:27:18 #12 Text 0 File Burncd.cpp, Line 4003
    Cache writing successful.

    15:27:18 #13 Phase 25 File dlgbrnst.cpp, Line 1853
    Caching of files completed

    15:27:18 #14 Phase 36 File dlgbrnst.cpp, Line 1853
    Burn process started at 2.4x (3.324 KB/s)

    15:27:18 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2497
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    15:27:18 #16 Text 0 File dlgbrnst.cpp, Line 1711
    Set remaining time: 16:44,634 (1004634ms) -> OK

    15:27:18 #17 Text 0 File DVDR.cpp, Line 2027
    Recording mode: Sequential Recording Mode

    15:27:18 #18 Text 0 File Mmc.cpp, Line 20673
    Set BUFE: Buffer underrun protection -> ON

    15:27:18 #19 Text 0 File DVDR.cpp, Line 2168
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    15:27:18 #20 Text 0 File Cdrdrv.cpp, Line 8281
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    15:27:18 #21 SCSI -1046 File Cdrdrv.cpp, Line 1178
    SCSI Exec, HA 2, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x18 0x81 0xD0 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x05

    15:27:18 #22 Text 0 File DVDR.cpp, Line 5656
    Book Type counter: 500, Book Type selected in EEPROM, command version 1

    15:27:18 #23 Text 0 File DVDR.cpp, Line 5656
    Book Type counter: 500, Book Type selected in EEPROM, command version 1

    15:27:18 #24 Text 0 File DVDR.cpp, Line 4877
    Drive: _NEC DVD_RW ND-2510A
    Book Type request: DVD-ROM
    Book Type setting not supported for the loaded disc type

    15:27:18 #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1702
    Illegal disc

    15:27:18 #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1702
    Could not perform start of Disc-at-once

    15:27:18 #27 Text 0 File dlgbrnst.cpp, Line 1711
    Set remaining time: 0:00,000 (0ms) -> OK

    15:27:18 #28 Phase 38 File dlgbrnst.cpp, Line 1853
    Burn process failed at 2.4x (3.324 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 17.11.2005 19:19:28 (Prassi/Veritas driver for win 2K)
    File 'Drivers\IdeChnDr.sys': Ver=2.2.0.2126, 04/10/2002, size=93594 bytes, created 14.08.2002 01:00:00 (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    .
    .
    1A23-0009-0030-2315-8317-2811

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28.07.2004 16:51:12
    Nero version: 6.6.0.1 (Nero Express)
    Recorder: <_NEC DVD_RW ND-2510A> Version: 2.05 - HA 2 TA 0 - 6.6.0.1
    Adapter driver: <> HA 2
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <HL-DT-ST CD-ROM GCR-8520B>Version: 1.00 - HA 1 TA 0 - 6.6.0.1
    Adapter driver: <IdeChnDr> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST340824A IdeChnDr Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST CD-ROM GCR-8520B IdeChnDr Port 1 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B IdeChnDr Port 1 ID 1 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST CD-ROM GCR-8520 D: CDRom0
    HL-DT-ST CD-RW GCE-8160B E: CDRom1
    _NEC DVD_RW ND-2510A F: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523744kB)
    Free physical memory: 266MB (273084kB)
    Memory in use : 47 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    10.10.2006
    ISO compilation
    15:30:15 #1 Text 0 File Isodoc.cpp, Line 6165
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    15:30:15 #2 Text 0 File Reader.cpp, Line 127
    Reader running

    15:30:15 #3 ISO9660GEN -11 File geniso.cpp, Line 3286
    First writeable address = 0 (0x00000000)

    15:30:15 #4 Text 0 File Burncd.cpp, Line 3117
    Turn on Disc-at-once, using DVD media

    15:30:16 #5 Text 0 File DlgWaitCD.cpp, Line 256
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1606095 (356:54.45, 3136MB)

    15:30:16 #6 Text 0 File DlgWaitCD.cpp, Line 268
    Write in overburning mode: NO (enabled: CD)

    15:30:16 #7 Text 0 File DlgWaitCD.cpp, Line 2309
    Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R
    Disc Manufacturer: CMC MA - G. AM3
    Disc Application Code: 64, Disc Physical Code: 193

    15:30:16 #8 Text 0 File DlgWaitCD.cpp, Line 430
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    15:30:16 #9 Text 0 File ThreadedTransferInterface.cpp, Line 844
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 1606096 (1606096) = #1606096/356:54.46
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1606096 blocks [_NEC DVD_RW ND-2510A]
    --------------------------------------------------------------

    15:30:18 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1047
    Prepare recorder [_NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3289284608, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    1606096 | lead-out | 1 | 0x00 | 0x41

    15:30:18 #11 Phase 24 File dlgbrnst.cpp, Line 1853
    Caching of files started

    15:30:18 #12 Text 0 File Burncd.cpp, Line 4003
    Cache writing successful.

    15:30:18 #13 Phase 25 File dlgbrnst.cpp, Line 1853
    Caching of files completed

    15:30:18 #14 Phase 36 File dlgbrnst.cpp, Line 1853
    Burn process started at 2.4x (3.324 KB/s)

    15:30:18 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2497
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    15:30:19 #16 Text 0 File dlgbrnst.cpp, Line 1711
    Set remaining time: 16:44,634 (1004634ms) -> OK

    15:30:19 #17 Text 0 File DVDR.cpp, Line 2027
    Recording mode: Sequential Recording Mode

    15:30:19 #18 Text 0 File Mmc.cpp, Line 20673
    Set BUFE: Buffer underrun protection -> ON

    15:30:19 #19 Text 0 File DVDR.cpp, Line 2168
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    15:30:19 #20 Text 0 File Cdrdrv.cpp, Line 8281
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    15:30:19 #21 SCSI -1046 File Cdrdrv.cpp, Line 1178
    SCSI Exec, HA 2, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x18 0x81 0xD0 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x05

    15:30:19 #22 Text 0 File DVDR.cpp, Line 5656
    Book Type counter: 500, Book Type selected in EEPROM, command version 1

    15:30:19 #23 Text 0 File DVDR.cpp, Line 5656
    Book Type counter: 500, Book Type selected in EEPROM, command version 1

    15:30:19 #24 Text 0 File DVDR.cpp, Line 4877
    Drive: _NEC DVD_RW ND-2510A
    Book Type request: DVD-ROM
    Book Type setting not supported for the loaded disc type

    15:30:19 #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1702
    Illegal disc

    15:30:19 #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1702
    Could not perform start of Disc-at-once

    15:30:19 #27 Text 0 File dlgbrnst.cpp, Line 1711
    Set remaining time: 0:00,000 (0ms) -> OK

    15:30:19 #28 Phase 38 File dlgbrnst.cpp, Line 1853
    Burn process failed at 2.4x (3.324 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 17.11.2005 19:19:28 (Prassi/Veritas driver for win 2K)
    File 'Drivers\IdeChnDr.sys': Ver=2.2.0.2126, 04/10/2002, size=93594 bytes, created 14.08.2002 01:00:00 (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    .
    .
    1A23-0009-0030-2315-8317-2811

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28.07.2004 16:51:12
    Nero version: 6.6.0.1 (Nero Express)
    Recorder: <_NEC DVD_RW ND-2510A> Version: 2.05 - HA 2 TA 0 - 6.6.0.1
    Adapter driver: <> HA 2
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <HL-DT-ST CD-ROM GCR-8520B>Version: 1.00 - HA 1 TA 0 - 6.6.0.1
    Adapter driver: <IdeChnDr> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST340824A IdeChnDr Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST CD-ROM GCR-8520B IdeChnDr Port 1 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B IdeChnDr Port 1 ID 1 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST CD-ROM GCR-8520 D: CDRom0
    HL-DT-ST CD-RW GCE-8160B E: CDRom1
    _NEC DVD_RW ND-2510A F: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523744kB)
    Free physical memory: 242MB (248120kB)
    Memory in use : 52 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    10.10.2006
    ISO compilation
    15:42:07 #1 Text 0 File Isodoc.cpp, Line 6165
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    15:42:07 #2 Text 0 File Reader.cpp, Line 127
    Reader running

    15:42:07 #3 ISO9660GEN -11 File geniso.cpp, Line 3286
    First writeable address = 0 (0x00000000)

    15:42:07 #4 Text 0 File Burncd.cpp, Line 3117
    Turn on Disc-at-once, using DVD media

    15:42:08 #5 Text 0 File DlgWaitCD.cpp, Line 256
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1606095 (356:54.45, 3136MB)

    15:42:08 #6 Text 0 File DlgWaitCD.cpp, Line 268
    Write in overburning mode: NO (enabled: CD)

    15:42:08 #7 Text 0 File DlgWaitCD.cpp, Line 2309
    Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R
    Disc Manufacturer: CMC MA - G. AM3
    Disc Application Code: 64, Disc Physical Code: 193

    15:42:08 #8 Text 0 File DlgWaitCD.cpp, Line 430
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    15:42:08 #9 Text 0 File ThreadedTransferInterface.cpp, Line 844
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 1606096 (1606096) = #1606096/356:54.46
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1606096 blocks [_NEC DVD_RW ND-2510A]
    --------------------------------------------------------------

    15:42:11 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1047
    Prepare recorder [_NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc not fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3289284608, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    1606096 | lead-out | 1 | 0x00 | 0x41

    15:42:12 #11 Phase 24 File dlgbrnst.cpp, Line 1853
    Caching of files started

    15:42:12 #12 Text 0 File Burncd.cpp, Line 4003
    Cache writing successful.

    15:42:12 #13 Phase 25 File dlgbrnst.cpp, Line 1853
    Caching of files completed

    15:42:12 #14 Phase 36 File dlgbrnst.cpp, Line 1853
    Burn process started at 2.4x (3.324 KB/s)

    15:42:12 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2497
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    15:42:12 #16 Text 0 File dlgbrnst.cpp, Line 1711
    Set remaining time: 16:44,634 (1004634ms) -> OK

    15:42:12 #17 Text 0 File DVDR.cpp, Line 2027
    Recording mode: Sequential Recording Mode for Multisession

    15:42:12 #18 Text 0 File Mmc.cpp, Line 20673
    Set BUFE: Buffer underrun protection -> ON

    15:42:12 #19 Text 0 File DVDR.cpp, Line 2168
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    15:42:12 #20 Text 0 File Cdrdrv.cpp, Line 8281
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    15:42:12 #21 SCSI -1046 File Cdrdrv.cpp, Line 1178
    SCSI Exec, HA 2, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x18 0x81 0xD0 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x05

    15:42:12 #22 Text 0 File DVDR.cpp, Line 5656
    Book Type counter: 500, Book Type selected in EEPROM, command version 1

    15:42:12 #23 Text 0 File DVDR.cpp, Line 5656
    Book Type counter: 500, Book Type selected in EEPROM, command version 1

    15:42:12 #24 Text 0 File DVDR.cpp, Line 4877
    Drive: _NEC DVD_RW ND-2510A
    Book Type request: DVD-ROM
    Book Type setting not supported for the loaded disc type

    15:42:12 #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1702
    Illegal disc

    15:42:12 #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1702
    Could not perform start of Disc-at-once

    15:42:12 #27 Text 0 File dlgbrnst.cpp, Line 1711
    Set remaining time: 0:00,000 (0ms) -> OK

    15:42:12 #28 Phase 38 File dlgbrnst.cpp, Line 1853
    Burn process failed at 2.4x (3.324 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 17.11.2005 19:19:28 (Prassi/Veritas driver for win 2K)
    File 'Drivers\InCDfs.SYS': Ver=4, 3, 0, 5, size=93440 bytes, created 13.09.2004 11:54:06 (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDpass.SYS': Ver=4, 3, 0, 5, size=28672 bytes, created 13.09.2004 11:54:46 (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDrec.SYS': Ver=4, 3, 0, 5, size=7680 bytes, created 13.09.2004 11:58:10 (InCD4 driver for win NT/2K/XP)
    File 'Drivers\IdeChnDr.sys': Ver=2.2.0.2126, 04/10/2002, size=93594 bytes, created 14.08.2002 01:00:00 (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    .
    .
    1A23-0009-0030-2315-8317-2811

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28.07.2004 16:51:12
    Nero version: 6.6.0.1 (Nero Express)
    Recorder: <_NEC DVD_RW ND-2510A> Version: 2.05 - HA 2 TA 0 - 6.6.0.1
    Adapter driver: <> HA 2
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <HL-DT-ST CD-ROM GCR-8520B>Version: 1.00 - HA 1 TA 0 - 6.6.0.1
    Adapter driver: <IdeChnDr> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST340824A IdeChnDr Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST CD-ROM GCR-8520B IdeChnDr Port 1 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B IdeChnDr Port 1 ID 1 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST CD-ROM GCR-8520 D: CDRom0
    HL-DT-ST CD-RW GCE-8160B E: CDRom1
    _NEC DVD_RW ND-2510A F: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523744kB)
    Free physical memory: 269MB (275568kB)
    Memory in use : 47 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    10.10.2006
    ISO compilation
    15:43:18 #1 Text 0 File Isodoc.cpp, Line 6165
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    15:43:18 #2 Text 0 File Reader.cpp, Line 127
    Reader running

    15:43:18 #3 ISO9660GEN -11 File geniso.cpp, Line 3286
    First writeable address = 0 (0x00000000)

    15:43:18 #4 Text 0 File Burncd.cpp, Line 3117
    Turn on Disc-at-once, using DVD media

    15:43:18 #5 Text 0 File DlgWaitCD.cpp, Line 256
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1606095 (356:54.45, 3136MB)

    15:43:18 #6 Text 0 File DlgWaitCD.cpp, Line 268
    Write in overburning mode: NO (enabled: CD)

    15:43:18 #7 Text 0 File DlgWaitCD.cpp, Line 2309
    Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R
    Disc Manufacturer: CMC MA - G. AM3
    Disc Application Code: 64, Disc Physical Code: 193

    15:43:18 #8 Text 0 File DlgWaitCD.cpp, Line 430
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    15:43:18 #9 Text 0 File ThreadedTransferInterface.cpp, Line 844
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 1606096 (1606096) = #1606096/356:54.46
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1606096 blocks [_NEC DVD_RW ND-2510A]
    --------------------------------------------------------------

    15:43:30 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1047
    Prepare recorder [_NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc not fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3289284608, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    1606096 | lead-out | 1 | 0x00 | 0x41

    15:43:30 #11 Phase 24 File dlgbrnst.cpp, Line 1853
    Caching of files started

    15:43:30 #12 Text 0 File Burncd.cpp, Line 4003
    Cache writing successful.

    15:43:30 #13 Phase 25 File dlgbrnst.cpp, Line 1853
    Caching of files completed

    15:43:30 #14 Phase 36 File dlgbrnst.cpp, Line 1853
    Burn process started at 1x (1.385 KB/s)

    15:43:30 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2497
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    15:43:30 #16 Text 0 File dlgbrnst.cpp, Line 1711
    Set remaining time: 40:04,122 (2404122ms) -> OK

    15:43:30 #17 Text 0 File DVDR.cpp, Line 2027
    Recording mode: Sequential Recording Mode for Multisession

    15:43:30 #18 Text 0 File Mmc.cpp, Line 20673
    Set BUFE: Buffer underrun protection -> ON

    15:43:30 #19 Text 0 File DVDR.cpp, Line 2168
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    15:43:30 #20 Text 0 File Cdrdrv.cpp, Line 8281
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    15:43:30 #21 SCSI -1046 File Cdrdrv.cpp, Line 1178
    SCSI Exec, HA 2, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x18 0x81 0xD0 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x05

    15:43:30 #22 Text 0 File DVDR.cpp, Line 5656
    Book Type counter: 500, Book Type selected in EEPROM, command version 1

    15:43:30 #23 Text 0 File DVDR.cpp, Line 5656
    Book Type counter: 500, Book Type selected in EEPROM, command version 1

    15:43:30 #24 Text 0 File DVDR.cpp, Line 4877
    Drive: _NEC DVD_RW ND-2510A
    Book Type request: DVD-ROM
    Book Type setting not supported for the loaded disc type

    15:43:30 #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1702
    Illegal disc

    15:43:30 #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1702
    Could not perform start of Disc-at-once

    15:43:30 #27 Text 0 File dlgbrnst.cpp, Line 1711
    Set remaining time: 0:00,000 (0ms) -> OK

    15:43:30 #28 Phase 38 File dlgbrnst.cpp, Line 1853
    Burn process failed at 1x (1.385 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 17.11.2005 19:19:28 (Prassi/Veritas driver for win 2K)
    File 'Drivers\InCDfs.SYS': Ver=4, 3, 0, 5, size=93440 bytes, created 13.09.2004 11:54:06 (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDpass.SYS': Ver=4, 3, 0, 5, size=28672 bytes, created 13.09.2004 11:54:46 (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDrec.SYS': Ver=4, 3, 0, 5, size=7680 bytes, created 13.09.2004 11:58:10 (InCD4 driver for win NT/2K/XP)
    File 'Drivers\IdeChnDr.sys': Ver=2.2.0.2126, 04/10/2002, size=93594 bytes, created 14.08.2002 01:00:00 (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    .
    .
    1A23-0009-0030-2315-8317-2811

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28.07.2004 16:51:12
    Nero version: 6.6.0.1 (Nero Express)
    Recorder: <_NEC DVD_RW ND-2510A> Version: 2.05 - HA 2 TA 0 - 6.6.0.1
    Adapter driver: <> HA 2
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <HL-DT-ST CD-ROM GCR-8520B>Version: 1.00 - HA 1 TA 0 - 6.6.0.1
    Adapter driver: <IdeChnDr> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST340824A IdeChnDr Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST CD-ROM GCR-8520B IdeChnDr Port 1 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B IdeChnDr Port 1 ID 1 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST CD-ROM GCR-8520 D: CDRom0
    HL-DT-ST CD-RW GCE-8160B E: CDRom1
    _NEC DVD_RW ND-2510A F: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523744kB)
    Free physical memory: 252MB (258088kB)
    Memory in use : 50 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    10.10.2006
    ISO compilation
    15:49:16 #1 Text 0 File Isodoc.cpp, Line 6165
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    15:49:16 #2 Text 0 File Reader.cpp, Line 127
    Reader running

    15:49:16 #3 ISO9660GEN -11 File geniso.cpp, Line 3286
    First writeable address = 0 (0x00000000)

    15:49:16 #4 Text 0 File Burncd.cpp, Line 3117
    Turn on Disc-at-once, using DVD media

    15:49:16 #5 Text 0 File DlgWaitCD.cpp, Line 256
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1606095 (356:54.45, 3136MB)

    15:49:16 #6 Text 0 File DlgWaitCD.cpp, Line 268
    Write in overburning mode: NO (enabled: CD)

    15:49:16 #7 Text 0 File DlgWaitCD.cpp, Line 2309
    Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R
    Disc Manufacturer: CMC MA - G. AM3
    Disc Application Code: 64, Disc Physical Code: 193

    15:49:16 #8 Text 0 File DlgWaitCD.cpp, Line 430
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    15:49:16 #9 Text 0 File ThreadedTransferInterface.cpp, Line 844
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 1606096 (1606096) = #1606096/356:54.46
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1606096 blocks [_NEC DVD_RW ND-2510A]
    --------------------------------------------------------------

    15:49:18 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1047
    Prepare recorder [_NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3289284608, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    1606096 | lead-out | 1 | 0x00 | 0x41

    15:49:18 #11 Phase 24 File dlgbrnst.cpp, Line 1853
    Caching of files started

    15:49:18 #12 Text 0 File Burncd.cpp, Line 4003
    Cache writing successful.

    15:49:18 #13 Phase 25 File dlgbrnst.cpp, Line 1853
    Caching of files completed

    15:49:18 #14 Phase 36 File dlgbrnst.cpp, Line 1853
    Burn process started at 2.4x (3.324 KB/s)

    15:49:18 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2497
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    15:49:18 #16 Text 0 File dlgbrnst.cpp, Line 1711
    Set remaining time: 16:44,634 (1004634ms) -> OK

    15:49:19 #17 Text 0 File DVDR.cpp, Line 2027
    Recording mode: Sequential Recording Mode

    15:49:19 #18 Text 0 File Mmc.cpp, Line 20673
    Set BUFE: Buffer underrun protection -> ON

    15:49:19 #19 Text 0 File DVDR.cpp, Line 2168
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    15:49:19 #20 Text 0 File Cdrdrv.cpp, Line 8281
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    15:49:19 #21 SCSI -1046 File Cdrdrv.cpp, Line 1178
    SCSI Exec, HA 2, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x18 0x81 0xD0 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x05

    15:49:19 #22 Text 0 File DVDR.cpp, Line 5656
    Book Type counter: 500, Book Type selected in EEPROM, command version 1

    15:49:19 #23 Text 0 File DVDR.cpp, Line 5656
    Book Type counter: 500, Book Type selected in EEPROM, command version 1

    15:49:19 #24 Text 0 File DVDR.cpp, Line 4877
    Drive: _NEC DVD_RW ND-2510A
    Book Type request: DVD-ROM
    Book Type setting not supported for the loaded disc type

    15:49:19 #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1702
    Illegal disc

    15:49:19 #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1702
    Could not perform start of Disc-at-once

    15:49:19 #27 Text 0 File dlgbrnst.cpp, Line 1711
    Set remaining time: 0:00,000 (0ms) -> OK

    15:49:19 #28 Phase 38 File dlgbrnst.cpp, Line 1853
    Burn process failed at 2.4x (3.324 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 17.11.2005 19:19:28 (Prassi/Veritas driver for win 2K)
    File 'Drivers\InCDfs.SYS': Ver=4, 3, 0, 5, size=93440 bytes, created 13.09.2004 11:54:06 (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDpass.SYS': Ver=4, 3, 0, 5, size=28672 bytes, created 13.09.2004 11:54:46 (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDrec.SYS': Ver=4, 3, 0, 5, size=7680 bytes, created 13.09.2004 11:58:10 (InCD4 driver for win NT/2K/XP)
    File 'Drivers\IdeChnDr.sys': Ver=2.2.0.2126, 04/10/2002, size=93594 bytes, created 14.08.2002 01:00:00 (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    .
    .
    1A23-0009-0030-2315-8317-2811

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28.07.2004 16:51:12
    Nero version: 6.6.0.1 (Nero Express)
    Recorder: <_NEC DVD_RW ND-2510A> Version: 2.05 - HA 2 TA 0 - 6.6.0.1
    Adapter driver: <> HA 2
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <HL-DT-ST CD-ROM GCR-8520B>Version: 1.00 - HA 1 TA 0 - 6.6.0.1
    Adapter driver: <IdeChnDr> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST340824A IdeChnDr Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST CD-ROM GCR-8520B IdeChnDr Port 1 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B IdeChnDr Port 1 ID 1 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST CD-ROM GCR-8520 D: CDRom0
    HL-DT-ST CD-RW GCE-8160B E: CDRom1
    _NEC DVD_RW ND-2510A F: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523744kB)
    Free physical memory: 217MB (222784kB)
    Memory in use : 57 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    10.10.2006
    ISO compilation
    16:11:59 #1 Text 0 File Isodoc.cpp, Line 6165
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    16:11:59 #2 Text 0 File Reader.cpp, Line 127
    Reader running

    16:11:59 #3 ISO9660GEN -11 File geniso.cpp, Line 3286
    First writeable address = 0 (0x00000000)

    16:11:59 #4 Text 0 File Burncd.cpp, Line 3117
    Turn on Disc-at-once, using DVD media

    16:12:00 #5 Text 0 File DlgWaitCD.cpp, Line 256
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1606095 (356:54.45, 3136MB)

    16:12:00 #6 Text 0 File DlgWaitCD.cpp, Line 268
    Write in overburning mode: NO (enabled: CD)

    16:12:00 #7 Text 0 File DlgWaitCD.cpp, Line 2309
    Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R
    Disc Manufacturer: CMC MA - G. AM3
    Disc Application Code: 64, Disc Physical Code: 193

    16:12:00 #8 Text 0 File DlgWaitCD.cpp, Line 430
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    16:12:00 #9 Text 0 File ThreadedTransferInterface.cpp, Line 844
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 1606096 (1606096) = #1606096/356:54.46
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1606096 blocks [_NEC DVD_RW ND-2510A]
    --------------------------------------------------------------

    16:12:01 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1047
    Prepare recorder [_NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3289284608, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    1606096 | lead-out | 1 | 0x00 | 0x41

    16:12:01 #11 Phase 24 File dlgbrnst.cpp, Line 1853
    Caching of files started

    16:12:01 #12 Text 0 File Burncd.cpp, Line 4003
    Cache writing successful.

    16:12:01 #13 Phase 25 File dlgbrnst.cpp, Line 1853
    Caching of files completed

    16:12:01 #14 Phase 36 File dlgbrnst.cpp, Line 1853
    Burn process started at 2.4x (3.324 KB/s)

    16:12:01 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2497
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    16:12:01 #16 Text 0 File dlgbrnst.cpp, Line 1711
    Set remaining time: 16:44,634 (1004634ms) -> OK

    16:12:01 #17 Text 0 File DVDR.cpp, Line 2027
    Recording mode: Sequential Recording Mode

    16:12:02 #18 Text 0 File Mmc.cpp, Line 20673
    Set BUFE: Buffer underrun protection -> ON

    16:12:02 #19 Text 0 File DVDR.cpp, Line 2168
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    16:12:02 #20 Text 0 File Cdrdrv.cpp, Line 8281
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    16:12:02 #21 SCSI -1046 File Cdrdrv.cpp, Line 1178
    SCSI Exec, HA 2, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x18 0x81 0xD0 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x05

    16:12:02 #22 Text 0 File DVDR.cpp, Line 5656
    Book Type counter: 500, Book Type selected in EEPROM, command version 1

    16:12:02 #23 Text 0 File DVDR.cpp, Line 5656
    Book Type counter: 500, Book Type selected in EEPROM, command version 1

    16:12:02 #24 Text 0 File DVDR.cpp, Line 4877
    Drive: _NEC DVD_RW ND-2510A
    Book Type request: DVD-ROM
    Book Type setting not supported for the loaded disc type

    16:12:02 #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1702
    Illegal disc

    16:12:02 #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1702
    Could not perform start of Disc-at-once

    16:12:02 #27 Text 0 File dlgbrnst.cpp, Line 1711
    Set remaining time: 0:00,000 (0ms) -> OK

    16:12:02 #28 Phase 38 File dlgbrnst.cpp, Line 1853
    Burn process failed at 2.4x (3.324 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 17.11.2005 19:19:28 (Prassi/Veritas driver for win 2K)
    File 'Drivers\InCDfs.SYS': Ver=4, 3, 0, 5, size=93440 bytes, created 13.09.2004 11:54:06 (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDpass.SYS': Ver=4, 3, 0, 5, size=28672 bytes, created 13.09.2004 11:54:46 (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDrec.SYS': Ver=4, 3, 0, 5, size=7680 bytes, created 13.09.2004 11:58:10 (InCD4 driver for win NT/2K/XP)
    File 'Drivers\IdeChnDr.sys': Ver=2.2.0.2126, 04/10/2002, size=93594 bytes, created 14.08.2002 01:00:00 (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
     
    abdgismo, Oct 10, 2006
    #1
  2. arniebear

    arniebear Active member

    Joined:
    Jan 2, 2005
    Messages:
    7,191
    Likes Received:
    0
    Trophy Points:
    96
    arniebear, Oct 10, 2006
    #2
  3. ddp

    ddp Moderator Staff Member

    Joined:
    Oct 15, 2004
    Messages:
    39,186
    Likes Received:
    144
    Trophy Points:
    143
    closed due to multi-posting
     
    ddp, Oct 10, 2006
    #3
Thread Status:
Not open for further replies.

Share This Page