Hello guys I have some problems when I burn memorex DVD with nero. It says illegal disc and could not perform start of Disc-at-once. Thx alot for your helps. There is log file. ------------------- Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28.07.2004 16:51:12 Nero version: 6.6.0.1 (Nero Express) Recorder: <_NEC DVD_RW ND-2510A> Version: 2.05 - HA 2 TA 0 - 6.6.0.1 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <HL-DT-ST CD-ROM GCR-8520B>Version: 1.00 - HA 1 TA 0 - 6.6.0.1 Adapter driver: <IdeChnDr> HA 1 === Scsi-Device-Map === DiskPeripheral : ST340824A IdeChnDr Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST CD-ROM GCR-8520B IdeChnDr Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B IdeChnDr Port 1 ID 1 DMA: Off === CDRom-Device-Map === HL-DT-ST CD-ROM GCR-8520 D: CDRom0 HL-DT-ST CD-RW GCE-8160B E: CDRom1 _NEC DVD_RW ND-2510A F: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523744kB) Free physical memory: 302MB (309612kB) Memory in use : 40 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 10.10.2006 ISO compilation 13:43:45 #1 Text 0 File Isodoc.cpp, Line 6165 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 13:43:45 #2 Text 0 File Reader.cpp, Line 127 Reader running 13:43:45 #3 Text 0 File Writer.cpp, Line 122 Writer _NEC DVD_RW ND-2510A running 13:43:46 #4 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 13:43:46 #5 Text 0 File Burncd.cpp, Line 3117 Turn on Disc-at-once, using DVD media 13:43:46 #6 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2143823 (476:24.23, 4187MB) 13:43:46 #7 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD) 13:43:46 #8 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R Disc Manufacturer: RITEKG - 05 Disc Application Code: 64, Disc Physical Code: 193 13:43:46 #9 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 13:43:46 #10 Text 0 File ThreadedTransferInterface.cpp, Line 844 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2143824 (2143824) = #2143824/476:24.24 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2143824 blocks [_NEC DVD_RW ND-2510A] -------------------------------------------------------------- 13:43:48 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1047 Prepare recorder [_NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4390551552, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2143824 | lead-out | 1 | 0x00 | 0x41 13:43:49 #12 Phase 24 File dlgbrnst.cpp, Line 1853 Caching of files started 13:43:49 #13 Text 0 File Burncd.cpp, Line 4003 Cache writing successful. 13:43:49 #14 Phase 25 File dlgbrnst.cpp, Line 1853 Caching of files completed 13:43:49 #15 Phase 36 File dlgbrnst.cpp, Line 1853 Burn process started at 4x (5.540 KB/s) 13:43:49 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2497 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 13:43:50 #17 Text 0 File dlgbrnst.cpp, Line 1711 Set remaining time: 13:18,906 (798906ms) -> OK 13:43:50 #18 Text 0 File DVDR.cpp, Line 2027 Recording mode: Sequential Recording Mode 13:43:50 #19 Text 0 File Mmc.cpp, Line 20673 Set BUFE: Buffer underrun protection -> ON 13:43:50 #20 Text 0 File DVDR.cpp, Line 2168 Start write address at LBA 0 DVD high compatibility mode: Yes 13:43:50 #21 Text 0 File Cdrdrv.cpp, Line 8281 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0.............. 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 13:43:50 #22 Text 0 File DVDR.cpp, Line 5656 Book Type counter: 500, Book Type selected in EEPROM, command version 1 13:43:50 #23 Text 0 File DVDR.cpp, Line 5656 Book Type counter: 500, Book Type selected in EEPROM, command version 1 13:43:50 #24 Text 0 File DVDR.cpp, Line 4877 Drive: _NEC DVD_RW ND-2510A Book Type request: DVD-ROM Book Type setting not supported for the loaded disc type 13:43:53 #25 Text 0 File Cdrdrv.cpp, Line 1284 13:43:53.495 - _NEC DVD_RW ND-2510A\H2 T0 : Queue again later 14:58:55 #26 Text 0 File WriterStatus.cpp, Line 116 <_NEC DVD_RW ND-2510A > start writing Lead-Out at LBA 2143824 (20B650h), lenght 0 blocks 14:58:55 #27 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 14:58:55 #28 Text 0 File DVDR.cpp, Line 2410 EndDAO: Last written address was 2143823 14:59:12 #29 Text 0 File DVDR.cpp, Line 5656 Book Type counter: 500, Book Type selected in EEPROM, command version 1 14:59:12 #30 Text 0 File DVDR.cpp, Line 4877 Drive: _NEC DVD_RW ND-2510A Book Type request: DVD-ROM Book Type setting not supported for the loaded disc type 14:59:12 #31 Text 0 File dlgbrnst.cpp, Line 1711 Set remaining time: 0:00,000 (0ms) -> OK 14:59:13 #32 Text 0 File dlgbrnst.cpp, Line 1711 Set remaining time: 0:00,000 (0ms) -> OK 14:59:13 #33 Phase 37 File dlgbrnst.cpp, Line 1853 Burn process completed successfully at 4x (5.540 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 17.11.2005 19:19:28 (Prassi/Veritas driver for win 2K) File 'Drivers\IdeChnDr.sys': Ver=2.2.0.2126, 04/10/2002, size=93594 bytes, created 14.08.2002 01:00:00 (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== . . 1A23-0009-0030-2315-8317-2811 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28.07.2004 16:51:12 Nero version: 6.6.0.1 (Nero Express) Recorder: <_NEC DVD_RW ND-2510A> Version: 2.05 - HA 2 TA 0 - 6.6.0.1 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <HL-DT-ST CD-ROM GCR-8520B>Version: 1.00 - HA 1 TA 0 - 6.6.0.1 Adapter driver: <IdeChnDr> HA 1 === Scsi-Device-Map === DiskPeripheral : ST340824A IdeChnDr Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST CD-ROM GCR-8520B IdeChnDr Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B IdeChnDr Port 1 ID 1 DMA: Off === CDRom-Device-Map === HL-DT-ST CD-ROM GCR-8520 D: CDRom0 HL-DT-ST CD-RW GCE-8160B E: CDRom1 _NEC DVD_RW ND-2510A F: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523744kB) Free physical memory: 329MB (336896kB) Memory in use : 35 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 10.10.2006 ISO compilation 15:02:12 #1 Text 0 File Isodoc.cpp, Line 6165 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 15:02:12 #2 Text 0 File Reader.cpp, Line 127 Reader running 15:02:12 #3 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 15:02:12 #4 Text 0 File Burncd.cpp, Line 3117 Turn on Disc-at-once, using DVD media 15:02:13 #5 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1606095 (356:54.45, 3136MB) 15:02:13 #6 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD) 15:02:13 #7 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R Disc Manufacturer: CMC MA - G. AM3 Disc Application Code: 64, Disc Physical Code: 193 15:02:13 #8 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 15:02:13 #9 Text 0 File ThreadedTransferInterface.cpp, Line 844 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1606096 (1606096) = #1606096/356:54.46 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1606096 blocks [_NEC DVD_RW ND-2510A] -------------------------------------------------------------- 15:02:15 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1047 Prepare recorder [_NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3289284608, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 1606096 | lead-out | 1 | 0x00 | 0x41 15:02:15 #11 Phase 24 File dlgbrnst.cpp, Line 1853 Caching of files started 15:02:16 #12 Text 0 File Burncd.cpp, Line 4003 Cache writing successful. 15:02:16 #13 Phase 25 File dlgbrnst.cpp, Line 1853 Caching of files completed 15:02:16 #14 Phase 36 File dlgbrnst.cpp, Line 1853 Burn process started at 2.4x (3.324 KB/s) 15:02:16 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2497 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 15:02:16 #16 Text 0 File dlgbrnst.cpp, Line 1711 Set remaining time: 16:44,634 (1004634ms) -> OK 15:02:16 #17 Text 0 File DVDR.cpp, Line 2027 Recording mode: Sequential Recording Mode 15:02:16 #18 Text 0 File Mmc.cpp, Line 20673 Set BUFE: Buffer underrun protection -> ON 15:02:16 #19 Text 0 File DVDR.cpp, Line 2168 Start write address at LBA 0 DVD high compatibility mode: Yes 15:02:16 #20 Text 0 File Cdrdrv.cpp, Line 8281 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 15:02:16 #21 SCSI -1046 File Cdrdrv.cpp, Line 1178 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x18 0x81 0xD0 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 15:02:16 #22 Text 0 File DVDR.cpp, Line 5656 Book Type counter: 500, Book Type selected in EEPROM, command version 1 15:02:16 #23 Text 0 File DVDR.cpp, Line 5656 Book Type counter: 500, Book Type selected in EEPROM, command version 1 15:02:16 #24 Text 0 File DVDR.cpp, Line 4877 Drive: _NEC DVD_RW ND-2510A Book Type request: DVD-ROM Book Type setting not supported for the loaded disc type 15:02:16 #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1702 Illegal disc 15:02:16 #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1702 Could not perform start of Disc-at-once 15:02:16 #27 Text 0 File dlgbrnst.cpp, Line 1711 Set remaining time: 0:00,000 (0ms) -> OK 15:02:16 #28 Phase 38 File dlgbrnst.cpp, Line 1853 Burn process failed at 2.4x (3.324 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 17.11.2005 19:19:28 (Prassi/Veritas driver for win 2K) File 'Drivers\IdeChnDr.sys': Ver=2.2.0.2126, 04/10/2002, size=93594 bytes, created 14.08.2002 01:00:00 (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== . . 1A23-0009-0030-2315-8317-2811 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28.07.2004 16:51:12 Nero version: 6.6.0.1 (Nero Express) Recorder: <_NEC DVD_RW ND-2510A> Version: 2.05 - HA 2 TA 0 - 6.6.0.1 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <HL-DT-ST CD-ROM GCR-8520B>Version: 1.00 - HA 1 TA 0 - 6.6.0.1 Adapter driver: <IdeChnDr> HA 1 === Scsi-Device-Map === DiskPeripheral : ST340824A IdeChnDr Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST CD-ROM GCR-8520B IdeChnDr Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B IdeChnDr Port 1 ID 1 DMA: Off === CDRom-Device-Map === HL-DT-ST CD-ROM GCR-8520 D: CDRom0 HL-DT-ST CD-RW GCE-8160B E: CDRom1 _NEC DVD_RW ND-2510A F: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523744kB) Free physical memory: 300MB (307336kB) Memory in use : 41 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 10.10.2006 ISO compilation 15:12:42 #1 Text 0 File Isodoc.cpp, Line 6165 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 15:12:42 #2 Text 0 File Reader.cpp, Line 127 Reader running 15:12:42 #3 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 15:12:42 #4 Text 0 File Burncd.cpp, Line 3117 Turn on Disc-at-once, using DVD media 15:12:43 #5 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1606095 (356:54.45, 3136MB) 15:12:43 #6 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD) 15:12:43 #7 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R Disc Manufacturer: CMC MA - G. AM3 Disc Application Code: 64, Disc Physical Code: 193 15:12:43 #8 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 15:12:43 #9 Text 0 File ThreadedTransferInterface.cpp, Line 844 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1606096 (1606096) = #1606096/356:54.46 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1606096 blocks [_NEC DVD_RW ND-2510A] -------------------------------------------------------------- 15:12:44 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1047 Prepare recorder [_NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3289284608, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 1606096 | lead-out | 1 | 0x00 | 0x41 15:12:45 #11 Phase 24 File dlgbrnst.cpp, Line 1853 Caching of files started 15:12:45 #12 Text 0 File Burncd.cpp, Line 4003 Cache writing successful. 15:12:45 #13 Phase 25 File dlgbrnst.cpp, Line 1853 Caching of files completed 15:12:45 #14 Phase 36 File dlgbrnst.cpp, Line 1853 Burn process started at 2.4x (3.324 KB/s) 15:12:45 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2497 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 15:12:45 #16 Text 0 File dlgbrnst.cpp, Line 1711 Set remaining time: 16:44,634 (1004634ms) -> OK 15:12:45 #17 Text 0 File DVDR.cpp, Line 2027 Recording mode: Sequential Recording Mode 15:12:45 #18 Text 0 File Mmc.cpp, Line 20673 Set BUFE: Buffer underrun protection -> ON 15:12:45 #19 Text 0 File DVDR.cpp, Line 2168 Start write address at LBA 0 DVD high compatibility mode: Yes 15:12:45 #20 Text 0 File Cdrdrv.cpp, Line 8281 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 15:12:45 #21 SCSI -1046 File Cdrdrv.cpp, Line 1178 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x18 0x81 0xD0 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 15:12:45 #22 Text 0 File DVDR.cpp, Line 5656 Book Type counter: 500, Book Type selected in EEPROM, command version 1 15:12:45 #23 Text 0 File DVDR.cpp, Line 5656 Book Type counter: 500, Book Type selected in EEPROM, command version 1 15:12:45 #24 Text 0 File DVDR.cpp, Line 4877 Drive: _NEC DVD_RW ND-2510A Book Type request: DVD-ROM Book Type setting not supported for the loaded disc type 15:12:45 #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1702 Illegal disc 15:12:45 #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1702 Could not perform start of Disc-at-once 15:12:45 #27 Text 0 File dlgbrnst.cpp, Line 1711 Set remaining time: 0:00,000 (0ms) -> OK 15:12:45 #28 Phase 38 File dlgbrnst.cpp, Line 1853 Burn process failed at 2.4x (3.324 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 17.11.2005 19:19:28 (Prassi/Veritas driver for win 2K) File 'Drivers\IdeChnDr.sys': Ver=2.2.0.2126, 04/10/2002, size=93594 bytes, created 14.08.2002 01:00:00 (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== . . 1A23-0009-0030-2315-8317-2811 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28.07.2004 16:51:12 Nero version: 6.6.0.1 (Nero Express) Recorder: <_NEC DVD_RW ND-2510A> Version: 2.05 - HA 2 TA 0 - 6.6.0.1 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <HL-DT-ST CD-ROM GCR-8520B>Version: 1.00 - HA 1 TA 0 - 6.6.0.1 Adapter driver: <IdeChnDr> HA 1 === Scsi-Device-Map === DiskPeripheral : ST340824A IdeChnDr Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST CD-ROM GCR-8520B IdeChnDr Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B IdeChnDr Port 1 ID 1 DMA: Off === CDRom-Device-Map === HL-DT-ST CD-ROM GCR-8520 D: CDRom0 HL-DT-ST CD-RW GCE-8160B E: CDRom1 _NEC DVD_RW ND-2510A F: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523744kB) Free physical memory: 298MB (305500kB) Memory in use : 41 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 10.10.2006 ISO compilation 15:13:40 #1 Text 0 File Isodoc.cpp, Line 6165 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 15:13:40 #2 Text 0 File Reader.cpp, Line 127 Reader running 15:13:40 #3 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 15:13:40 #4 Text 0 File Burncd.cpp, Line 3117 Turn on Disc-at-once, using DVD media 15:13:41 #5 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1606095 (356:54.45, 3136MB) 15:13:41 #6 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD) 15:13:41 #7 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R Disc Manufacturer: CMC MA - G. AM3 Disc Application Code: 64, Disc Physical Code: 193 15:13:41 #8 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 15:13:41 #9 Text 0 File ThreadedTransferInterface.cpp, Line 844 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1606096 (1606096) = #1606096/356:54.46 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1606096 blocks [_NEC DVD_RW ND-2510A] -------------------------------------------------------------- 15:13:42 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1047 Prepare recorder [_NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3289284608, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 1606096 | lead-out | 1 | 0x00 | 0x41 15:13:42 #11 Phase 24 File dlgbrnst.cpp, Line 1853 Caching of files started 15:13:42 #12 Text 0 File Burncd.cpp, Line 4003 Cache writing successful. 15:13:42 #13 Phase 25 File dlgbrnst.cpp, Line 1853 Caching of files completed 15:13:42 #14 Phase 36 File dlgbrnst.cpp, Line 1853 Burn process started at 1x (1.385 KB/s) 15:13:43 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2497 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 15:13:43 #16 Text 0 File dlgbrnst.cpp, Line 1711 Set remaining time: 40:04,122 (2404122ms) -> OK 15:13:43 #17 Text 0 File DVDR.cpp, Line 2027 Recording mode: Sequential Recording Mode 15:13:43 #18 Text 0 File Mmc.cpp, Line 20673 Set BUFE: Buffer underrun protection -> ON 15:13:43 #19 Text 0 File DVDR.cpp, Line 2168 Start write address at LBA 0 DVD high compatibility mode: Yes 15:13:43 #20 Text 0 File Cdrdrv.cpp, Line 8281 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 15:13:43 #21 SCSI -1046 File Cdrdrv.cpp, Line 1178 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x18 0x81 0xD0 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 15:13:43 #22 Text 0 File DVDR.cpp, Line 5656 Book Type counter: 500, Book Type selected in EEPROM, command version 1 15:13:43 #23 Text 0 File DVDR.cpp, Line 5656 Book Type counter: 500, Book Type selected in EEPROM, command version 1 15:13:43 #24 Text 0 File DVDR.cpp, Line 4877 Drive: _NEC DVD_RW ND-2510A Book Type request: DVD-ROM Book Type setting not supported for the loaded disc type 15:13:43 #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1702 Illegal disc 15:13:43 #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1702 Could not perform start of Disc-at-once 15:13:43 #27 Text 0 File dlgbrnst.cpp, Line 1711 Set remaining time: 0:00,000 (0ms) -> OK 15:13:43 #28 Phase 38 File dlgbrnst.cpp, Line 1853 Burn process failed at 1x (1.385 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 17.11.2005 19:19:28 (Prassi/Veritas driver for win 2K) File 'Drivers\IdeChnDr.sys': Ver=2.2.0.2126, 04/10/2002, size=93594 bytes, created 14.08.2002 01:00:00 (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== . . 1A23-0009-0030-2315-8317-2811 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28.07.2004 16:51:12 Nero version: 6.6.0.1 (Nero Express) Recorder: <_NEC DVD_RW ND-2510A> Version: 2.05 - HA 2 TA 0 - 6.6.0.1 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <HL-DT-ST CD-ROM GCR-8520B>Version: 1.00 - HA 1 TA 0 - 6.6.0.1 Adapter driver: <IdeChnDr> HA 1 === Scsi-Device-Map === DiskPeripheral : ST340824A IdeChnDr Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST CD-ROM GCR-8520B IdeChnDr Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B IdeChnDr Port 1 ID 1 DMA: Off === CDRom-Device-Map === HL-DT-ST CD-ROM GCR-8520 D: CDRom0 HL-DT-ST CD-RW GCE-8160B E: CDRom1 _NEC DVD_RW ND-2510A F: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523744kB) Free physical memory: 274MB (281520kB) Memory in use : 46 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 10.10.2006 ISO compilation 15:27:15 #1 Text 0 File Isodoc.cpp, Line 6165 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 15:27:15 #2 Text 0 File Reader.cpp, Line 127 Reader running 15:27:15 #3 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 15:27:15 #4 Text 0 File Burncd.cpp, Line 3117 Turn on Disc-at-once, using DVD media 15:27:16 #5 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1606095 (356:54.45, 3136MB) 15:27:16 #6 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD) 15:27:16 #7 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R Disc Manufacturer: CMC MA - G. AM3 Disc Application Code: 64, Disc Physical Code: 193 15:27:16 #8 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 15:27:16 #9 Text 0 File ThreadedTransferInterface.cpp, Line 844 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1606096 (1606096) = #1606096/356:54.46 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1606096 blocks [_NEC DVD_RW ND-2510A] -------------------------------------------------------------- 15:27:17 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1047 Prepare recorder [_NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3289284608, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 1606096 | lead-out | 1 | 0x00 | 0x41 15:27:18 #11 Phase 24 File dlgbrnst.cpp, Line 1853 Caching of files started 15:27:18 #12 Text 0 File Burncd.cpp, Line 4003 Cache writing successful. 15:27:18 #13 Phase 25 File dlgbrnst.cpp, Line 1853 Caching of files completed 15:27:18 #14 Phase 36 File dlgbrnst.cpp, Line 1853 Burn process started at 2.4x (3.324 KB/s) 15:27:18 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2497 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 15:27:18 #16 Text 0 File dlgbrnst.cpp, Line 1711 Set remaining time: 16:44,634 (1004634ms) -> OK 15:27:18 #17 Text 0 File DVDR.cpp, Line 2027 Recording mode: Sequential Recording Mode 15:27:18 #18 Text 0 File Mmc.cpp, Line 20673 Set BUFE: Buffer underrun protection -> ON 15:27:18 #19 Text 0 File DVDR.cpp, Line 2168 Start write address at LBA 0 DVD high compatibility mode: Yes 15:27:18 #20 Text 0 File Cdrdrv.cpp, Line 8281 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 15:27:18 #21 SCSI -1046 File Cdrdrv.cpp, Line 1178 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x18 0x81 0xD0 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 15:27:18 #22 Text 0 File DVDR.cpp, Line 5656 Book Type counter: 500, Book Type selected in EEPROM, command version 1 15:27:18 #23 Text 0 File DVDR.cpp, Line 5656 Book Type counter: 500, Book Type selected in EEPROM, command version 1 15:27:18 #24 Text 0 File DVDR.cpp, Line 4877 Drive: _NEC DVD_RW ND-2510A Book Type request: DVD-ROM Book Type setting not supported for the loaded disc type 15:27:18 #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1702 Illegal disc 15:27:18 #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1702 Could not perform start of Disc-at-once 15:27:18 #27 Text 0 File dlgbrnst.cpp, Line 1711 Set remaining time: 0:00,000 (0ms) -> OK 15:27:18 #28 Phase 38 File dlgbrnst.cpp, Line 1853 Burn process failed at 2.4x (3.324 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 17.11.2005 19:19:28 (Prassi/Veritas driver for win 2K) File 'Drivers\IdeChnDr.sys': Ver=2.2.0.2126, 04/10/2002, size=93594 bytes, created 14.08.2002 01:00:00 (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== . . 1A23-0009-0030-2315-8317-2811 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28.07.2004 16:51:12 Nero version: 6.6.0.1 (Nero Express) Recorder: <_NEC DVD_RW ND-2510A> Version: 2.05 - HA 2 TA 0 - 6.6.0.1 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <HL-DT-ST CD-ROM GCR-8520B>Version: 1.00 - HA 1 TA 0 - 6.6.0.1 Adapter driver: <IdeChnDr> HA 1 === Scsi-Device-Map === DiskPeripheral : ST340824A IdeChnDr Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST CD-ROM GCR-8520B IdeChnDr Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B IdeChnDr Port 1 ID 1 DMA: Off === CDRom-Device-Map === HL-DT-ST CD-ROM GCR-8520 D: CDRom0 HL-DT-ST CD-RW GCE-8160B E: CDRom1 _NEC DVD_RW ND-2510A F: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523744kB) Free physical memory: 266MB (273084kB) Memory in use : 47 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 10.10.2006 ISO compilation 15:30:15 #1 Text 0 File Isodoc.cpp, Line 6165 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 15:30:15 #2 Text 0 File Reader.cpp, Line 127 Reader running 15:30:15 #3 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 15:30:15 #4 Text 0 File Burncd.cpp, Line 3117 Turn on Disc-at-once, using DVD media 15:30:16 #5 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1606095 (356:54.45, 3136MB) 15:30:16 #6 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD) 15:30:16 #7 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R Disc Manufacturer: CMC MA - G. AM3 Disc Application Code: 64, Disc Physical Code: 193 15:30:16 #8 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 15:30:16 #9 Text 0 File ThreadedTransferInterface.cpp, Line 844 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1606096 (1606096) = #1606096/356:54.46 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1606096 blocks [_NEC DVD_RW ND-2510A] -------------------------------------------------------------- 15:30:18 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1047 Prepare recorder [_NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3289284608, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 1606096 | lead-out | 1 | 0x00 | 0x41 15:30:18 #11 Phase 24 File dlgbrnst.cpp, Line 1853 Caching of files started 15:30:18 #12 Text 0 File Burncd.cpp, Line 4003 Cache writing successful. 15:30:18 #13 Phase 25 File dlgbrnst.cpp, Line 1853 Caching of files completed 15:30:18 #14 Phase 36 File dlgbrnst.cpp, Line 1853 Burn process started at 2.4x (3.324 KB/s) 15:30:18 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2497 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 15:30:19 #16 Text 0 File dlgbrnst.cpp, Line 1711 Set remaining time: 16:44,634 (1004634ms) -> OK 15:30:19 #17 Text 0 File DVDR.cpp, Line 2027 Recording mode: Sequential Recording Mode 15:30:19 #18 Text 0 File Mmc.cpp, Line 20673 Set BUFE: Buffer underrun protection -> ON 15:30:19 #19 Text 0 File DVDR.cpp, Line 2168 Start write address at LBA 0 DVD high compatibility mode: Yes 15:30:19 #20 Text 0 File Cdrdrv.cpp, Line 8281 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 15:30:19 #21 SCSI -1046 File Cdrdrv.cpp, Line 1178 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x18 0x81 0xD0 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 15:30:19 #22 Text 0 File DVDR.cpp, Line 5656 Book Type counter: 500, Book Type selected in EEPROM, command version 1 15:30:19 #23 Text 0 File DVDR.cpp, Line 5656 Book Type counter: 500, Book Type selected in EEPROM, command version 1 15:30:19 #24 Text 0 File DVDR.cpp, Line 4877 Drive: _NEC DVD_RW ND-2510A Book Type request: DVD-ROM Book Type setting not supported for the loaded disc type 15:30:19 #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1702 Illegal disc 15:30:19 #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1702 Could not perform start of Disc-at-once 15:30:19 #27 Text 0 File dlgbrnst.cpp, Line 1711 Set remaining time: 0:00,000 (0ms) -> OK 15:30:19 #28 Phase 38 File dlgbrnst.cpp, Line 1853 Burn process failed at 2.4x (3.324 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 17.11.2005 19:19:28 (Prassi/Veritas driver for win 2K) File 'Drivers\IdeChnDr.sys': Ver=2.2.0.2126, 04/10/2002, size=93594 bytes, created 14.08.2002 01:00:00 (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== . . 1A23-0009-0030-2315-8317-2811 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28.07.2004 16:51:12 Nero version: 6.6.0.1 (Nero Express) Recorder: <_NEC DVD_RW ND-2510A> Version: 2.05 - HA 2 TA 0 - 6.6.0.1 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <HL-DT-ST CD-ROM GCR-8520B>Version: 1.00 - HA 1 TA 0 - 6.6.0.1 Adapter driver: <IdeChnDr> HA 1 === Scsi-Device-Map === DiskPeripheral : ST340824A IdeChnDr Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST CD-ROM GCR-8520B IdeChnDr Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B IdeChnDr Port 1 ID 1 DMA: Off === CDRom-Device-Map === HL-DT-ST CD-ROM GCR-8520 D: CDRom0 HL-DT-ST CD-RW GCE-8160B E: CDRom1 _NEC DVD_RW ND-2510A F: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523744kB) Free physical memory: 242MB (248120kB) Memory in use : 52 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 10.10.2006 ISO compilation 15:42:07 #1 Text 0 File Isodoc.cpp, Line 6165 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 15:42:07 #2 Text 0 File Reader.cpp, Line 127 Reader running 15:42:07 #3 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 15:42:07 #4 Text 0 File Burncd.cpp, Line 3117 Turn on Disc-at-once, using DVD media 15:42:08 #5 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1606095 (356:54.45, 3136MB) 15:42:08 #6 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD) 15:42:08 #7 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R Disc Manufacturer: CMC MA - G. AM3 Disc Application Code: 64, Disc Physical Code: 193 15:42:08 #8 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 15:42:08 #9 Text 0 File ThreadedTransferInterface.cpp, Line 844 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1606096 (1606096) = #1606096/356:54.46 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1606096 blocks [_NEC DVD_RW ND-2510A] -------------------------------------------------------------- 15:42:11 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1047 Prepare recorder [_NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3289284608, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 1606096 | lead-out | 1 | 0x00 | 0x41 15:42:12 #11 Phase 24 File dlgbrnst.cpp, Line 1853 Caching of files started 15:42:12 #12 Text 0 File Burncd.cpp, Line 4003 Cache writing successful. 15:42:12 #13 Phase 25 File dlgbrnst.cpp, Line 1853 Caching of files completed 15:42:12 #14 Phase 36 File dlgbrnst.cpp, Line 1853 Burn process started at 2.4x (3.324 KB/s) 15:42:12 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2497 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 15:42:12 #16 Text 0 File dlgbrnst.cpp, Line 1711 Set remaining time: 16:44,634 (1004634ms) -> OK 15:42:12 #17 Text 0 File DVDR.cpp, Line 2027 Recording mode: Sequential Recording Mode for Multisession 15:42:12 #18 Text 0 File Mmc.cpp, Line 20673 Set BUFE: Buffer underrun protection -> ON 15:42:12 #19 Text 0 File DVDR.cpp, Line 2168 Start write address at LBA 0 DVD high compatibility mode: Yes 15:42:12 #20 Text 0 File Cdrdrv.cpp, Line 8281 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 15:42:12 #21 SCSI -1046 File Cdrdrv.cpp, Line 1178 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x18 0x81 0xD0 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 15:42:12 #22 Text 0 File DVDR.cpp, Line 5656 Book Type counter: 500, Book Type selected in EEPROM, command version 1 15:42:12 #23 Text 0 File DVDR.cpp, Line 5656 Book Type counter: 500, Book Type selected in EEPROM, command version 1 15:42:12 #24 Text 0 File DVDR.cpp, Line 4877 Drive: _NEC DVD_RW ND-2510A Book Type request: DVD-ROM Book Type setting not supported for the loaded disc type 15:42:12 #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1702 Illegal disc 15:42:12 #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1702 Could not perform start of Disc-at-once 15:42:12 #27 Text 0 File dlgbrnst.cpp, Line 1711 Set remaining time: 0:00,000 (0ms) -> OK 15:42:12 #28 Phase 38 File dlgbrnst.cpp, Line 1853 Burn process failed at 2.4x (3.324 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 17.11.2005 19:19:28 (Prassi/Veritas driver for win 2K) File 'Drivers\InCDfs.SYS': Ver=4, 3, 0, 5, size=93440 bytes, created 13.09.2004 11:54:06 (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 0, 5, size=28672 bytes, created 13.09.2004 11:54:46 (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 0, 5, size=7680 bytes, created 13.09.2004 11:58:10 (InCD4 driver for win NT/2K/XP) File 'Drivers\IdeChnDr.sys': Ver=2.2.0.2126, 04/10/2002, size=93594 bytes, created 14.08.2002 01:00:00 (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== . . 1A23-0009-0030-2315-8317-2811 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28.07.2004 16:51:12 Nero version: 6.6.0.1 (Nero Express) Recorder: <_NEC DVD_RW ND-2510A> Version: 2.05 - HA 2 TA 0 - 6.6.0.1 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <HL-DT-ST CD-ROM GCR-8520B>Version: 1.00 - HA 1 TA 0 - 6.6.0.1 Adapter driver: <IdeChnDr> HA 1 === Scsi-Device-Map === DiskPeripheral : ST340824A IdeChnDr Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST CD-ROM GCR-8520B IdeChnDr Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B IdeChnDr Port 1 ID 1 DMA: Off === CDRom-Device-Map === HL-DT-ST CD-ROM GCR-8520 D: CDRom0 HL-DT-ST CD-RW GCE-8160B E: CDRom1 _NEC DVD_RW ND-2510A F: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523744kB) Free physical memory: 269MB (275568kB) Memory in use : 47 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 10.10.2006 ISO compilation 15:43:18 #1 Text 0 File Isodoc.cpp, Line 6165 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 15:43:18 #2 Text 0 File Reader.cpp, Line 127 Reader running 15:43:18 #3 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 15:43:18 #4 Text 0 File Burncd.cpp, Line 3117 Turn on Disc-at-once, using DVD media 15:43:18 #5 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1606095 (356:54.45, 3136MB) 15:43:18 #6 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD) 15:43:18 #7 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R Disc Manufacturer: CMC MA - G. AM3 Disc Application Code: 64, Disc Physical Code: 193 15:43:18 #8 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 15:43:18 #9 Text 0 File ThreadedTransferInterface.cpp, Line 844 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1606096 (1606096) = #1606096/356:54.46 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1606096 blocks [_NEC DVD_RW ND-2510A] -------------------------------------------------------------- 15:43:30 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1047 Prepare recorder [_NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3289284608, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 1606096 | lead-out | 1 | 0x00 | 0x41 15:43:30 #11 Phase 24 File dlgbrnst.cpp, Line 1853 Caching of files started 15:43:30 #12 Text 0 File Burncd.cpp, Line 4003 Cache writing successful. 15:43:30 #13 Phase 25 File dlgbrnst.cpp, Line 1853 Caching of files completed 15:43:30 #14 Phase 36 File dlgbrnst.cpp, Line 1853 Burn process started at 1x (1.385 KB/s) 15:43:30 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2497 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 15:43:30 #16 Text 0 File dlgbrnst.cpp, Line 1711 Set remaining time: 40:04,122 (2404122ms) -> OK 15:43:30 #17 Text 0 File DVDR.cpp, Line 2027 Recording mode: Sequential Recording Mode for Multisession 15:43:30 #18 Text 0 File Mmc.cpp, Line 20673 Set BUFE: Buffer underrun protection -> ON 15:43:30 #19 Text 0 File DVDR.cpp, Line 2168 Start write address at LBA 0 DVD high compatibility mode: Yes 15:43:30 #20 Text 0 File Cdrdrv.cpp, Line 8281 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 15:43:30 #21 SCSI -1046 File Cdrdrv.cpp, Line 1178 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x18 0x81 0xD0 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 15:43:30 #22 Text 0 File DVDR.cpp, Line 5656 Book Type counter: 500, Book Type selected in EEPROM, command version 1 15:43:30 #23 Text 0 File DVDR.cpp, Line 5656 Book Type counter: 500, Book Type selected in EEPROM, command version 1 15:43:30 #24 Text 0 File DVDR.cpp, Line 4877 Drive: _NEC DVD_RW ND-2510A Book Type request: DVD-ROM Book Type setting not supported for the loaded disc type 15:43:30 #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1702 Illegal disc 15:43:30 #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1702 Could not perform start of Disc-at-once 15:43:30 #27 Text 0 File dlgbrnst.cpp, Line 1711 Set remaining time: 0:00,000 (0ms) -> OK 15:43:30 #28 Phase 38 File dlgbrnst.cpp, Line 1853 Burn process failed at 1x (1.385 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 17.11.2005 19:19:28 (Prassi/Veritas driver for win 2K) File 'Drivers\InCDfs.SYS': Ver=4, 3, 0, 5, size=93440 bytes, created 13.09.2004 11:54:06 (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 0, 5, size=28672 bytes, created 13.09.2004 11:54:46 (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 0, 5, size=7680 bytes, created 13.09.2004 11:58:10 (InCD4 driver for win NT/2K/XP) File 'Drivers\IdeChnDr.sys': Ver=2.2.0.2126, 04/10/2002, size=93594 bytes, created 14.08.2002 01:00:00 (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== . . 1A23-0009-0030-2315-8317-2811 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28.07.2004 16:51:12 Nero version: 6.6.0.1 (Nero Express) Recorder: <_NEC DVD_RW ND-2510A> Version: 2.05 - HA 2 TA 0 - 6.6.0.1 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <HL-DT-ST CD-ROM GCR-8520B>Version: 1.00 - HA 1 TA 0 - 6.6.0.1 Adapter driver: <IdeChnDr> HA 1 === Scsi-Device-Map === DiskPeripheral : ST340824A IdeChnDr Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST CD-ROM GCR-8520B IdeChnDr Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B IdeChnDr Port 1 ID 1 DMA: Off === CDRom-Device-Map === HL-DT-ST CD-ROM GCR-8520 D: CDRom0 HL-DT-ST CD-RW GCE-8160B E: CDRom1 _NEC DVD_RW ND-2510A F: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523744kB) Free physical memory: 252MB (258088kB) Memory in use : 50 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 10.10.2006 ISO compilation 15:49:16 #1 Text 0 File Isodoc.cpp, Line 6165 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 15:49:16 #2 Text 0 File Reader.cpp, Line 127 Reader running 15:49:16 #3 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 15:49:16 #4 Text 0 File Burncd.cpp, Line 3117 Turn on Disc-at-once, using DVD media 15:49:16 #5 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1606095 (356:54.45, 3136MB) 15:49:16 #6 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD) 15:49:16 #7 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R Disc Manufacturer: CMC MA - G. AM3 Disc Application Code: 64, Disc Physical Code: 193 15:49:16 #8 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 15:49:16 #9 Text 0 File ThreadedTransferInterface.cpp, Line 844 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1606096 (1606096) = #1606096/356:54.46 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1606096 blocks [_NEC DVD_RW ND-2510A] -------------------------------------------------------------- 15:49:18 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1047 Prepare recorder [_NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3289284608, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 1606096 | lead-out | 1 | 0x00 | 0x41 15:49:18 #11 Phase 24 File dlgbrnst.cpp, Line 1853 Caching of files started 15:49:18 #12 Text 0 File Burncd.cpp, Line 4003 Cache writing successful. 15:49:18 #13 Phase 25 File dlgbrnst.cpp, Line 1853 Caching of files completed 15:49:18 #14 Phase 36 File dlgbrnst.cpp, Line 1853 Burn process started at 2.4x (3.324 KB/s) 15:49:18 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2497 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 15:49:18 #16 Text 0 File dlgbrnst.cpp, Line 1711 Set remaining time: 16:44,634 (1004634ms) -> OK 15:49:19 #17 Text 0 File DVDR.cpp, Line 2027 Recording mode: Sequential Recording Mode 15:49:19 #18 Text 0 File Mmc.cpp, Line 20673 Set BUFE: Buffer underrun protection -> ON 15:49:19 #19 Text 0 File DVDR.cpp, Line 2168 Start write address at LBA 0 DVD high compatibility mode: Yes 15:49:19 #20 Text 0 File Cdrdrv.cpp, Line 8281 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 15:49:19 #21 SCSI -1046 File Cdrdrv.cpp, Line 1178 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x18 0x81 0xD0 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 15:49:19 #22 Text 0 File DVDR.cpp, Line 5656 Book Type counter: 500, Book Type selected in EEPROM, command version 1 15:49:19 #23 Text 0 File DVDR.cpp, Line 5656 Book Type counter: 500, Book Type selected in EEPROM, command version 1 15:49:19 #24 Text 0 File DVDR.cpp, Line 4877 Drive: _NEC DVD_RW ND-2510A Book Type request: DVD-ROM Book Type setting not supported for the loaded disc type 15:49:19 #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1702 Illegal disc 15:49:19 #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1702 Could not perform start of Disc-at-once 15:49:19 #27 Text 0 File dlgbrnst.cpp, Line 1711 Set remaining time: 0:00,000 (0ms) -> OK 15:49:19 #28 Phase 38 File dlgbrnst.cpp, Line 1853 Burn process failed at 2.4x (3.324 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 17.11.2005 19:19:28 (Prassi/Veritas driver for win 2K) File 'Drivers\InCDfs.SYS': Ver=4, 3, 0, 5, size=93440 bytes, created 13.09.2004 11:54:06 (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 0, 5, size=28672 bytes, created 13.09.2004 11:54:46 (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 0, 5, size=7680 bytes, created 13.09.2004 11:58:10 (InCD4 driver for win NT/2K/XP) File 'Drivers\IdeChnDr.sys': Ver=2.2.0.2126, 04/10/2002, size=93594 bytes, created 14.08.2002 01:00:00 (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== . . 1A23-0009-0030-2315-8317-2811 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28.07.2004 16:51:12 Nero version: 6.6.0.1 (Nero Express) Recorder: <_NEC DVD_RW ND-2510A> Version: 2.05 - HA 2 TA 0 - 6.6.0.1 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <HL-DT-ST CD-ROM GCR-8520B>Version: 1.00 - HA 1 TA 0 - 6.6.0.1 Adapter driver: <IdeChnDr> HA 1 === Scsi-Device-Map === DiskPeripheral : ST340824A IdeChnDr Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST CD-ROM GCR-8520B IdeChnDr Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B IdeChnDr Port 1 ID 1 DMA: Off === CDRom-Device-Map === HL-DT-ST CD-ROM GCR-8520 D: CDRom0 HL-DT-ST CD-RW GCE-8160B E: CDRom1 _NEC DVD_RW ND-2510A F: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523744kB) Free physical memory: 217MB (222784kB) Memory in use : 57 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 10.10.2006 ISO compilation 16:11:59 #1 Text 0 File Isodoc.cpp, Line 6165 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 16:11:59 #2 Text 0 File Reader.cpp, Line 127 Reader running 16:11:59 #3 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 16:11:59 #4 Text 0 File Burncd.cpp, Line 3117 Turn on Disc-at-once, using DVD media 16:12:00 #5 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1606095 (356:54.45, 3136MB) 16:12:00 #6 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD) 16:12:00 #7 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R Disc Manufacturer: CMC MA - G. AM3 Disc Application Code: 64, Disc Physical Code: 193 16:12:00 #8 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 16:12:00 #9 Text 0 File ThreadedTransferInterface.cpp, Line 844 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1606096 (1606096) = #1606096/356:54.46 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1606096 blocks [_NEC DVD_RW ND-2510A] -------------------------------------------------------------- 16:12:01 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1047 Prepare recorder [_NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3289284608, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 1606096 | lead-out | 1 | 0x00 | 0x41 16:12:01 #11 Phase 24 File dlgbrnst.cpp, Line 1853 Caching of files started 16:12:01 #12 Text 0 File Burncd.cpp, Line 4003 Cache writing successful. 16:12:01 #13 Phase 25 File dlgbrnst.cpp, Line 1853 Caching of files completed 16:12:01 #14 Phase 36 File dlgbrnst.cpp, Line 1853 Burn process started at 2.4x (3.324 KB/s) 16:12:01 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2497 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 16:12:01 #16 Text 0 File dlgbrnst.cpp, Line 1711 Set remaining time: 16:44,634 (1004634ms) -> OK 16:12:01 #17 Text 0 File DVDR.cpp, Line 2027 Recording mode: Sequential Recording Mode 16:12:02 #18 Text 0 File Mmc.cpp, Line 20673 Set BUFE: Buffer underrun protection -> ON 16:12:02 #19 Text 0 File DVDR.cpp, Line 2168 Start write address at LBA 0 DVD high compatibility mode: Yes 16:12:02 #20 Text 0 File Cdrdrv.cpp, Line 8281 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 16:12:02 #21 SCSI -1046 File Cdrdrv.cpp, Line 1178 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x18 0x81 0xD0 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 16:12:02 #22 Text 0 File DVDR.cpp, Line 5656 Book Type counter: 500, Book Type selected in EEPROM, command version 1 16:12:02 #23 Text 0 File DVDR.cpp, Line 5656 Book Type counter: 500, Book Type selected in EEPROM, command version 1 16:12:02 #24 Text 0 File DVDR.cpp, Line 4877 Drive: _NEC DVD_RW ND-2510A Book Type request: DVD-ROM Book Type setting not supported for the loaded disc type 16:12:02 #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1702 Illegal disc 16:12:02 #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1702 Could not perform start of Disc-at-once 16:12:02 #27 Text 0 File dlgbrnst.cpp, Line 1711 Set remaining time: 0:00,000 (0ms) -> OK 16:12:02 #28 Phase 38 File dlgbrnst.cpp, Line 1853 Burn process failed at 2.4x (3.324 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 17.11.2005 19:19:28 (Prassi/Veritas driver for win 2K) File 'Drivers\InCDfs.SYS': Ver=4, 3, 0, 5, size=93440 bytes, created 13.09.2004 11:54:06 (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 0, 5, size=28672 bytes, created 13.09.2004 11:54:46 (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 0, 5, size=7680 bytes, created 13.09.2004 11:58:10 (InCD4 driver for win NT/2K/XP) File 'Drivers\IdeChnDr.sys': Ver=2.2.0.2126, 04/10/2002, size=93594 bytes, created 14.08.2002 01:00:00 (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ======
The firmware on your burner is out of date, go to the NEC site and get the latest and flash your burner, this should help you with media recognition. Read the directions for flashing. http://support.necam.com/Optical/downloads/FlashFirmware/ Also multi-posting is against forum rules, I will ask that your other thread be closed. http://forums.afterdawn.com/thread_view.cfm/405175
Hi, In addition to what arniebear stated: You are a few versions behind on nero 6. Before installing use this link http://ww2.nero.com/nero6/en/Clean_Tools.html Run the clean tool to completely remove your current version of nero, reboot and use the links below to get the known stable version of nero. http://httpdl1.usw.nero.com/software/Nero6/Nero-6.6.0.18_no_yt.exe Package 2 http://httpdl1.usw.nero.com/software/Nero6/NVE-3.1.0.21_no_yt.exe http://www.nero.com/nero6/enu/InCD_CleanTool.html incd is a packet writing software..use the above link to get the cleantool for incd and remove it from your system. This media is poorly manufatured I as well as others here would recommend using verbatims or sony (label needs to say made in Japan NOT Taiwan) DMA should be on use the below link to enable it: http://www.burstcopy.com/dma/xp/ your serial number needs to be edited out before someone steals it (use the notepad to edit your post and remove your serial which appears several times thru-out your log)
Also, try burning at 4x at least, burning to slow is as bad as to fast and with today's media 4x is the slowest you need to go.
