my basic question, and basic step by step answers would be usefull. i downloaded dvd shrink and dvd decrypter like suggested. I have a dvd movie. I want to copy it, and burn it. I use nero vision to burn dvds. Now that I have shrink and decrypter installed, what do I need to do to copy my dvd to my hard drive so i can burn it?
The one element that may go wrong for you here, is if decrypter doesn't get around the DVD's protection. So here we go. Put your original into the dvd drive. Open decrypter and you'll notice by sight and sound that it's doing its thing. It now has identified the type of encryption devices on the disk. Now choose the destination folder you want it to RIP to. Create a new folder in the hdd you have. EG: C:\Rip it to here, click ok, now you will notice that this folders name and directory appear in the decrypters slot. Assuming all settings in decrypter are at default, press the dvd to hdd icon. Now make a cuppa and sit tight. At the end of a sucessful rip, you'll hear it play a happy tune. Quit decrypter and open shrink. Click open files and point to the folder the files were ripped to..C:\Rip it to here, press ok and shrink will do a quick analysis(2-3mins) Now press backup, choose another folder for it to encode to EG: C:\Encode to here. it will now start to encode the files ripped in the other folder, to this folder. Time for another bourbon. This takes a short while so sit tight. Now the dvd drive drawer opens up, remove your original, and pop in a blank, close it up and forget about it. Time for more chasers. When the burn process is complete, shrink will eject your new backup......job done. Please understand that I didn't go into all the variouse settings of those two programs, simply because they are available in Alkohol and fasfrank's revamped guides and downloads site. BBmayo has another set of guides and downloads also. But what I've explained allbeit simplisticly, is just that....simple stuff...yeah? Here are those links to guide you with all the necessary tweaks and soforth you'll need. Lastly, and very importantly, choose high quality media, burn at half it's rated speed, and it's happy days from here. http://www.dvdplusvideo.com/A_F_Guides.html http://webpages.charter.net/bacitup/ Cheers. EDIT: Don't open nero, shrink does it for you
Simple, you need to add one more piece of software to get the job done with the new copy protections. Install RipIt4Me. http://www.ripit4me.org/guide.html You can look over the guide and get the downloads you need there. When installed the 1-click mode decrypts (even the more difficult new copy protections), cleans, and processes for compliance, and then opens in Shrink for a compliance test with the quick analysis. With Shrink loaded all you have to do is go ahead and do the transcode and burn. When you click backup, select Nero and your burner drive and it opens Nero to burn when Shrink finishes transcoding.
If you got a few bucks buy AnyDVD to run in the background and you can get past the encryptions. You can't just burn a movie.
You're welcome. The current problem is that AnyDVD isn't getting the job done by itself on all of the new releases. DVDIdle has had even more problems catching up. AnyDVD has to have the CloneDVD 2 to go along with it for some of the new releases. I own AnyDVD, so I'm not pleased with how Slysoft has let support slip recently. I hear they have new fish to fry with the new HD encryption software. NI4M is a freebie and has been doing better than the other programs recently.
when shrink tried to burn it failed and heres the log Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 3:06:00 AM ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero API version: 6.6.0.18 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Internal Version: 6, 6, 0, 18e Recorder: <DVDRW IDE1004> Version: 0039 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : WDC WD800AB-60CBA0 atapi Port 0 ID 0 DMA: On DiskPeripheral : WDC WD1200JB-00DUA3 atapi Port 0 ID 1 DMA: On CdRomPeripheral : DVDRW IDE1004 atapi Port 1 ID 0 DMA: Off CdRomPeripheral : CyberDrv CW088D CD-R/RW atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === DVDRW IDE1004 E: CDRom0 CyberDrv CW088D CD-R/RW F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 118MB (121788kB) Memory in use : 76 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 11.2.2007 NeroAPI 12:44:47 PM #1 Phase 112 File APIProgress.cpp, Line 276 DVD-Video files reallocation started 12:44:47 PM #2 Phase 114 File APIProgress.cpp, Line 276 DVD-Video files reallocation completed (no file modified) 12:44:47 PM #3 Phase 111 File APIProgress.cpp, Line 276 DVD-Video files sorted 12:44:47 PM #4 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03D66200 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0x95 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x44 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x24 0x00 12:44:47 PM #5 Text 0 File Reader.cpp, Line 127 Reader running 12:44:47 PM #6 Text 0 File Writer.cpp, Line 122 Writer DVDRW IDE1004 running 12:44:47 PM #7 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 12:44:47 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 12:44:47 PM #9 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 12:44:47 PM #10 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 12:44:47 PM #11 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2227263 (494:56.63, 4350MB) 12:44:47 PM #12 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO 12:44:47 PM #13 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: DVDRW IDE1004, Media type: DVD+R Disc Manufacturer ID: CMC MAG, Media Type ID: M01, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 7 12:44:47 PM #14 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 12:44:47 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2227264 (2227264) = #2227264/494:56.64 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2227264 blocks [DVDRW IDE1004] -------------------------------------------------------------- 12:44:47 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [DVDRW IDE1004] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4561436672, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2227264 | lead-out | 1 | 0x41 | 0x00 12:44:48 PM #17 Phase 24 File APIProgress.cpp, Line 276 Caching of files started 12:44:48 PM #18 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 12:44:48 PM #19 Phase 25 File APIProgress.cpp, Line 276 Caching of files completed 12:44:48 PM #20 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 1x (1,385 KB/s) 12:44:48 PM #21 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03D66800 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0xFF 0x40 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x24 0x00 12:44:48 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 12:44:48 PM #23 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: CMC.MAG. Media type ID: M01 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 07 43 4D 43 20 4D - 41 47 00 4D 30 31 00 38 ...CMC.MAG.M01.8 23 54 37 18 00 3E 6E 00 - 70 62 15 15 0B 0B 08 08 #T7..>n.pb...... 01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................ 12:44:48 PM #24 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03D66200 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0x95 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x44 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x24 0x00 12:44:48 PM #25 Text 0 File DVDPlusRW.cpp, Line 659 Start write address at LBA 0 DVD high compatibility mode: Yes 1:44:20 PM #26 Text 0 File WriterStatus.cpp, Line 116 <DVDRW IDE1004 > start writing Lead-Out at LBA 2227264 (21FC40h), lenght 0 blocks 1:44:20 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 1:54:22 PM #28 SCSI -1023 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03D66600 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x2C Sense Qual: 0x00 CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x2C 0x00 1:58:22 PM #29 CDR -1175 File Cdrdrv.cpp, Line 1240 Internal trace Resending of command failed after 240000ms CDB Data[hex]: 5B 01 06 00 00 00 00 00 00 00 00 00 1:58:22 PM #30 SCSI -1169 File Cdrdrv.cpp, Line 1241 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x08 CDB Data: 0x5B 0x01 0x06 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x04 0x08 1:59:02 PM #31 CDR -1175 File Cdrdrv.cpp, Line 1240 Internal trace Resending of command failed after 40000ms CDB Data[hex]: 95 00 00 00 00 00 00 00 00 00 00 44 1:59:02 PM #32 SCSI -1169 File Cdrdrv.cpp, Line 1241 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03D66200 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x08 CDB Data: 0x95 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x44 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x04 0x08 1:59:02 PM #33 CDR -1023 File ThreadedTransferInterface.cpp, Line 1916 Command sequence error DVDRW IDE1004\H1 T0 1:59:02 PM #34 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1916 Could not perform end of Disc-at-once 1:59:52 PM #35 SCSI -1023 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03D64C00 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x2C Sense Qual: 0x00 CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x2C 0x00 1:59:52 PM #36 Phase 127 File APIProgress.cpp, Line 276 Generating DVD high compatibility borders 2:00:32 PM #37 CDR -1175 File Cdrdrv.cpp, Line 1240 Internal trace Resending of command failed after 40000ms CDB Data[hex]: 95 00 00 00 00 00 00 00 00 00 00 44 2:00:32 PM #38 SCSI -1169 File Cdrdrv.cpp, Line 1241 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03D66200 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x08 CDB Data: 0x95 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x44 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x04 0x08 2:00:32 PM #39 CDR -1023 File WriterStatus.cpp, Line 167 Command sequence error DVDRW IDE1004\H1 T0 2:00:32 PM #40 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 2:00:32 PM #41 SCSI -1023 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0012ACF0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x2C Sense Qual: 0x00 CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x2C 0x00 ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x05 0x32 0x01 0xC4 0x08 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x 2:00:32 PM #42 Phase 38 File APIProgress.cpp, Line 276 Burn process failed at 1x (1,385 KB/s) 2:00:32 PM #43 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 2:00:32 PM #44 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 1/29/2007 9:03:34 PM File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 3:06:00 AM File 'Drivers\PXHELP20.SYS': Ver=3.00.43J, size=36624 bytes, created 1/29/2007 9:03:34 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Your DVD Burner has the DMA setting off. Go into the Device Manager, expand the IDE ATA/ATAPI Controllers and uninstall the channel with the burner on it. It's usually the Secondary Channel. Reboot and check to make sure the drive is back in DMA. That could be the cause of your problem. As for Shrink, Shrink doesn't burn. It starts the Nero for you, but the burning is all Nero after that. Just browsing through it looks like multiple errors in your Nero log. Hopefully getting the DMA on for the burner will cure it. If not, you may want to burn your output files to the hard drive and use Nero to run a simulation burn to see if it's a media related problem or all software and hardware. Then post the log for the simulation so we can compare.
By the way, when you encounter burn problems, always make sure your firmware is up to date as well. Get the DMA on and check the firmware are the first 2 things you need to do with the DMA the first.
im slightly concerned with this statement, but maybe you just misspoke, but clone dvd 2 has nothing to do with breaking the encryption on the DVD, that is all up to anydvd. (or FAB, or RIPIT4me.)
No I did not misspeak. You're right in part but you obviously overlooked the fact that transcoding software can play a part in how the files are handled during the transcoding process. CloneDVD 2 can help with the shortcomings of AnyDVD. As many like to say, they were made for each other. If you'll notice, some people complained of Slysoft suggesting they use CloneDVD 2 when having problems with programs like Shrink. If you want a running tally of problems seen with AnyDVD, review the Saw 3 thread stickied here in the Shrink forum.
Sometimes I'm not clear enough and other times I don't go in depth enough. No problem. If you check around Slysoft has released a beta AnyDVD-HD that's making the rounds. I noticed Ireland posted the link in the safty valve section.
@zanev, just to add, Not very good disks at all, try Verbatims, or Taiyo Yudens Try not to multi-task when burning too. Way too slow, even for those kind of disks, dont go any higher than 4x speed.
Like I said, DMA and firmware and then look to the media. 300bowler makes some good points on media and not multitasking if you don't have the resources.
Compare what's listed for yours with the latest available. Usually factory support has downloads. I sometimes find the link doing a google. For instance Sony Support Firmware. The one thing not to do is lose power when updating. Otherwise it's a painless process. I've done it many times.
Often a picture is better than a set of directions. Open Nero Infotools to find the Firmware version for the drive. Select the Drive tab, make sure the drive is in the drop down window at the top, the firmware should be listed (arrow in the photo).
