the error message says that nero failed to read the disc? i have tried uninstall and reinstall unsuccessfully Can someone help i am a total noob and get this error log, Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 16/07/2004 09:24:34 ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17:35:32 Nero version: 6.6.0.3 (Nero Express) Recorder: <_NEC DVD_RW ND-1300A> Version: 1.06 - HA 1 TA 1 - 6.6.0.3 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <HL-DT-ST DVD-ROM GDR8163B>Version: 0L23 - HA 1 TA 0 - 6.6.0.3 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y120L0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 0 DMA: On CdRomPeripheral : _NEC DVD_RW ND-1300A atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === HL-DT-ST DVD-ROM GDR8163 D: CDRom0 _NEC DVD_RW ND-1300A E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1023MB (1048048kB) Free physical memory: 487MB (498868kB) Memory in use : 52 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 30.5.2007 ===== Disc-Copy over image - 1st step : Copy to image ... 11:11:30 #1 Text 0 File Reader.cpp, Line 127 Reader running 11:11:30 #2 Text 0 File Writer.cpp, Line 122 Writer Image Recorder running 11:11:31 #3 Text 0 File DVDCopy.cpp, Line 279 DVD Track-Information from source disc S01 T01 Con 0x14 Start 0 Len 1530080 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 11:11:31 #4 Text 0 File DVDCopy.cpp, Line 382 Max -1 tracks of 1 allowed to copy 1: 0 - 1530080 = 1530080, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 11:11:31 #5 Text 0 File Burncd.cpp, Line 3151 Turn on Disc-at-once, using DVD media 11:11:31 #6 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 2621439 (582:32.39, 5119MB) Last address to be written: 1529929 (339:59.04, 2988MB) 11:11:31 #7 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD) 11:11:31 #8 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: Image Recorder; CD type reading failed ATIP Data: ? 11:11:31 #9 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:11:31 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 1530080 (1530080) = #1530080/340:1.5 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1530080 blocks [Image Recorder] -------------------------------------------------------------- 11:11:31 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1040 Prepare recorder [Image Recorder] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3133603840, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1530080 | lead-out | 1 | 0x41 | 0x00 11:11:31 #12 Phase 120 File dlgbrnst.cpp, Line 1832 Creating the image for burning 11:11:31 #13 Text 0 File ThreadedTransferInterface.cpp, Line 2596 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 11:11:55 #14 SCSI -1128 File Cdrdrv.cpp, Line 1430 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x05FA1000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x11 Sense Qual: 0x00 CDB Data: 0x28 0x00 0x00 0x00 0x7C 0xC0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x7C 0xD0 0x0A 0x00 0x00 0x00 0x00 0x11 0x00 11:11:55 #15 TRANSFER -25 File Reader.cpp, Line 382 Error reading data 11:11:55 #16 Text 0 File Reader.cpp, Line 385 Exception value: -1128 11:11:55 #17 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 11:11:55 #18 Phase 22 File dlgbrnst.cpp, Line 1832 Reading disc failed ===== Disc-Copy over image - 2nd step : Burn the image ... 11:11:30 #1 Text 0 File Reader.cpp, Line 127 Reader running 11:11:30 #2 Text 0 File Writer.cpp, Line 122 Writer Image Recorder running 11:11:31 #3 Text 0 File DVDCopy.cpp, Line 279 DVD Track-Information from source disc S01 T01 Con 0x14 Start 0 Len 1530080 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 11:11:31 #4 Text 0 File DVDCopy.cpp, Line 382 Max -1 tracks of 1 allowed to copy 1: 0 - 1530080 = 1530080, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 11:11:31 #5 Text 0 File Burncd.cpp, Line 3151 Turn on Disc-at-once, using DVD media 11:11:31 #6 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 2621439 (582:32.39, 5119MB) Last address to be written: 1529929 (339:59.04, 2988MB) 11:11:31 #7 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD) 11:11:31 #8 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: Image Recorder; CD type reading failed ATIP Data: ? 11:11:31 #9 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:11:31 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 1530080 (1530080) = #1530080/340:1.5 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1530080 blocks [Image Recorder] -------------------------------------------------------------- 11:11:31 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1040 Prepare recorder [Image Recorder] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3133603840, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1530080 | lead-out | 1 | 0x41 | 0x00 11:11:31 #12 Phase 120 File dlgbrnst.cpp, Line 1832 Creating the image for burning 11:11:31 #13 Text 0 File ThreadedTransferInterface.cpp, Line 2596 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 11:11:55 #14 SCSI -1128 File Cdrdrv.cpp, Line 1430 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x05FA1000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x11 Sense Qual: 0x00 CDB Data: 0x28 0x00 0x00 0x00 0x7C 0xC0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x7C 0xD0 0x0A 0x00 0x00 0x00 0x00 0x11 0x00 11:11:55 #15 TRANSFER -25 File Reader.cpp, Line 382 Error reading data 11:11:55 #16 Text 0 File Reader.cpp, Line 385 Exception value: -1128 11:11:55 #17 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 11:11:55 #18 Phase 22 File dlgbrnst.cpp, Line 1832 Reading disc failed Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 16/07/2004 09:24:34 File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 13:00:00 (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Nero by itself cannot copy commercial DVDs. You need a program to get around the copy protection. Try DVD Fab Decrypter free. from here: http://www.dvdidle.com/free.htm Here's a guide for ripping with DVDFab if needed: http://www.dvdshrink.info/dvdfab_decrypter.php
your NEC burner is old! and you're firmware is not up to date! So it will have a problem recognizing newer media that is out there.
Wow, many many thanks for the detailed replies, i shall go through each step as carefully as i can and report back.
soooooo you are making a copy of a copy..... ok.... what you are experiencing is 2 things; 1. the disk that you are trying to copy may be dirty..... use a residue free cleaning (alcohol, windex, or something that will dry fast) and a lint free cloth and apply the cleaner to the DVD.... then in straight lines....from the inner hub to the outer edge... wipe the cleaner off the disk in one motion till the disk is clean and free of smudges or finger prints. 2. the disk that you are trying to copy is not of good quality and your drive can't read the disk! It has to read the disk before it can copy the disk! soooo if you are getting a 17:17:43 #16 TRANSFER -25 File Reader.cpp, Line 382 Error reading data you need to try to rip the disk first then copy! here is something to read about hard disks to rip: http://www.dvdplusvideo.com/petesguide9.html
Great stuff IHoe! Sounds like the disc itself is defective, it could still play correctly but copying could be a problem. Of course it could be dirty-hopefully and easily fixed. mgk I use this version (6.6.0.18) of Nero too, and it is the best one out; maybe better than any 7.x version! JM2C
Many thanks Ihoe, things are working again, yes i am copying a 'copy' ..... i should have said and i have closely examined the disc and can see many scratches albeit slight. I am usually careful when i handle discs but will take extra care from now on.
Hi, just to give you an update, would appreciate any further advice ... Everything has been okay but intermittent. Was burning yesterday copying on the fly until still more burn errors/problems. I am still on nero 6.6.0.18 btw. but i have had the following errors [see below], even with verbatim cds have checked DMA is on everywhere, done defrag, uninstalled,ccleaner,etc re-booted etc Also i dont have an alternative to copy on the fly as i dont have an option to make my own dvd ?, i can burn dvd files yes, but not make my own dvd, do i not have any dvd plug-ins someone has said, where do i find them or upgrade ? Also my last two burn errors occurred right at the end of the burn. They more or less reached 99% in processing and failed ? This means i can play them on my dvd player but cant finalise them ? Can anything be done to play them on all players or do i sling the discs ? I am getting desperate, do i need to get a new drive ? Here are the errors .. [1] Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 16/07/2004 09:24:34 ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34 Nero Version: 6.6.0.18 Internal Version: 6, 6, 0, 18e (Nero Express) Recorder: <_NEC DVD_RW ND-1300A> Version: 1.0C - HA 1 TA 1 - 6.6.0.18 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <HL-DT-ST DVD-ROM GDR8163B>Version: 0L23 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y120L0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 0 DMA: On CdRomPeripheral : _NEC DVD_RW ND-1300A atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === HL-DT-ST DVD-ROM GDR8163B D: CDRom0 _NEC DVD_RW ND-1300A E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1023MB (1048048kB) Free physical memory: 561MB (575100kB) Memory in use : 45 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 8.6.2007 CD Copy 13:21:55 #1 Text 0 File Burncd.cpp, Line 2948 _NEC DVD_RW ND-1300A Buffer underrun protection activated 13:21:55 #2 Text 0 File Reader.cpp, Line 127 Reader running 13:21:55 #3 Text 0 File Writer.cpp, Line 122 Writer _NEC DVD_RW ND-1300A running 13:21:55 #4 Phase 48 File dlgbrnst.cpp, Line 1832 Analyzing disc 13:21:55 #5 CDCOPY -1 File CDCopy.cpp, Line 1912 The CD is copyrighted 13:21:56 #6 Text 0 File CDCopy.cpp, Line 2128 _Index0_ _______Index1_______ PostPause ___LastBlockOfTrack_ Track 1: 0 0 ( 0:02.00) 7052 7051 ( 1:36.01) Track 2: 7052 7202 ( 1:38.02) 246889 246888 ( 54:53.63) 13:21:56 #7 Text 0 File CDCopy.cpp, Line 840 Copy options: copy on-the-fly: ON read ISRC/MCN: OFF use jitter correction: OFF data options ignore read error: ON write defekt blocks OFF read raw data: OFF read r-w subchannel data: OFF audio options ignore read error: ON read indexes: OFF read r-w subchannel data: OFF source disc does not look like CD Extra 01. 0 - 7202 = 7202, data (TRM_DATA_RAW_MODE2, block size 2352) 02. 7202 - 246889 = 239687, data (TRM_DATA_RAW_MODE2, block size 2352) 13:21:56 #8 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using CD-R/RW media 13:21:56 #9 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 359846 ( 79:59.71) Last address to be written: 246888 ( 54:53.63) 13:21:56 #10 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 13:21:56 #11 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: _NEC DVD_RW ND-1300A; CDR code: 00 97 27 06; OSJ entry from: DIGITAL STORAGE TECHNOLOGY CO.,LTD ATIP Data: Special Info [hex] 1: D0 00 A0, 2: 61 1B 06 (LI 97:27.06), 3: 4F 3B 48 (LO 79:59.72) Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid) 13:21:56 #12 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 13:21:56 #13 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE2_2336 (1 - Data (mode 2)) 2 indices, index0 (150) not provided original disc pos #0 + 7052 (7052) = #7052/1:34.2 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE2_2336, 2336, config 0, wanted index0 0 blocks, length 7052 blocks [_NEC DVD_RW ND-1300A] 1: TRM_DATA_MODE2_2336 (2 - Data (mode 2)) 2 indices, index0 (150) not provided original disc pos #7202 + 239687 (239687) = #246889/54:51.64 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE2_2336, 2336, config 0, wanted index0 0 blocks, length 239687 blocks [_NEC DVD_RW ND-1300A] -------------------------------------------------------------- 13:21:56 #14 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [_NEC DVD_RW ND-1300A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x20; Session Closed, disc fixated Tracks 1 to 2: 1: TRM_DATA_MODE2_2336, 2336/0x00, FilePos 0 350400 16823872, ISRC "" 2: TRM_DATA_MODE2_2336, 2336/0x00, FilePos 16823872 17174272 577083104, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0x00 -150 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 7052 | 2 | 0 | 0x41 | 0x00 7202 | 2 | 1 | 0x41 | 0x00 246889 | lead-out | 1 | 0x41 | 0x00 13:21:56 #15 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 16x (2,400 KB/s) 13:21:56 #16 SCSI -1189 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03B05600 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x02 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0xFF 0x40 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x02 13:21:56 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 13:21:56 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 1 (not relocatable, no disc pos, no patch infos, orig at #7202): write at #7202 13:21:56 #19 Text 0 File Mmc.cpp, Line 17024 StartDAO : CD-Text - Off 13:21:56 #20 Text 0 File Mmc.cpp, Line 21774 Set BUFE: Buffer underrun protection -> ON 13:21:56 #21 Text 0 File Mmc.cpp, Line 17311 CueData, Len=48 41 00 00 24 00 00 00 00 41 01 00 20 00 00 00 00 41 01 01 20 00 00 02 00 41 02 00 20 00 01 24 02 41 02 01 20 00 01 26 02 41 aa 01 24 00 36 35 40 13:26:26 #22 SCSI -1135 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0BA50000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0x12 0x7C 0x00 0x00 0x1C 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x12 0x7B 0x0A 0x00 0x00 0x00 0x00 0x0C 0x00 13:26:26 #23 CDR -1135 File Writer.cpp, Line 311 Write error 13:26:27 #24 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 13:26:27 #25 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 13:26:27 #26 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 16x (2,400 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 16/07/2004 09:24:34 File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 13:00:00 (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====================================================== [2] Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 16/07/2004 09:24:34 ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34 Nero Version: 6.6.0.18 Internal Version: 6, 6, 0, 18e (Nero Express) Recorder: <_NEC DVD_RW ND-1300A> Version: 1.0C - HA 1 TA 1 - 6.6.0.18 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <HL-DT-ST DVD-ROM GDR8163B>Version: 0L23 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y120L0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 0 DMA: On CdRomPeripheral : _NEC DVD_RW ND-1300A atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === HL-DT-ST DVD-ROM GDR8163B D: CDRom0 _NEC DVD_RW ND-1300A E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1023MB (1048048kB) Free physical memory: 516MB (528968kB) Memory in use : 49 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 8.6.2007 DVD-Copy on the fly 15:43:41 #1 Text 0 File Reader.cpp, Line 127 Reader running 15:43:41 #2 Text 0 File Writer.cpp, Line 122 Writer _NEC DVD_RW ND-1300A running 15:43:41 #3 Text 0 File DVDCopy.cpp, Line 293 DVD Track-Information from source disc: Media Type: DVD+R S01 T01 Con 0x14 Start 0 Len 2086816 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 15:43:41 #4 Text 0 File DVDCopy.cpp, Line 406 Max -1 tracks of 1 allowed to copy 1: 0 - 2086816 = 2086816, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 15:43:41 #5 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 15:43:41 #6 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2086815 (463:44.15, 4075MB) 15:43:41 #7 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 15:43:41 #8 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: _NEC DVD_RW ND-1300A, Media type: DVD+R 15:43:41 #9 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 15:43:41 #10 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 2086816 (2086816) = #2086816/463:44.16 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2086816 blocks [_NEC DVD_RW ND-1300A] -------------------------------------------------------------- 15:43:41 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [_NEC DVD_RW ND-1300A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4273799168, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2086816 | lead-out | 1 | 0x41 | 0x00 15:43:41 #12 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (5,540 KB/s) 15:43:41 #13 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 15:43:41 #14 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0BE60600 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x24 0x00 15:43:41 #15 Text 0 File DVDPlusRW.cpp, Line 659 Start write address at LBA 0 DVD high compatibility mode: Yes 15:58:39 #16 Text 0 File WriterStatus.cpp, Line 116 <_NEC DVD_RW ND-1300A > start writing Lead-Out at LBA 2086816 (1FD7A0h), lenght 0 blocks 15:58:39 #17 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 15:59:41 #18 SCSI -1106 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x03 CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x73 0x03 15:59:46 #19 SCSI -1176 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x03 CDB Data: 0x5B 0x01 0x06 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x72 0x03 15:59:46 #20 CDR -1176 File ThreadedTransferInterface.cpp, Line 1916 Session fixation error 15:59:46 #21 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1916 Could not perform end of Disc-at-once 15:59:58 #22 Phase 127 File dlgbrnst.cpp, Line 1832 Generating DVD high compatibility borders 16:00:01 #23 Phase 129 File dlgbrnst.cpp, Line 1832 Generating DVD borders completed successfully 16:00:06 #24 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 16/07/2004 09:24:34 File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 13:00:00 (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
@mgk If you're using Nero Express as indicated by your log, you should be able to stop copying on the fly!! Open Nero Express >select copy entire DVD> In the next window where the source and destination are selected, just under those, UNCHECK quick copy. This will make Xpress copy to HD before the burn. Something's wrong with your set up if you can't do that.
Yes, your driver might be old, but the problem could also be the copywright on the dvd your trying to copy. Download DVD43. This will decrypt the copywright and let nero read the disk.
