1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Nero 6 wont copy dvd's

Discussion in 'Nero discussion' started by mgk, May 30, 2007.

  1. mgk

    mgk Member

    Joined:
    May 30, 2007
    Messages:
    52
    Likes Received:
    0
    Trophy Points:
    16
    the error message says that nero failed to read the disc?

    i have tried uninstall and reinstall unsuccessfully

    Can someone help i am a total noob and get this error log,






    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 16/07/2004 09:24:34
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17:35:32
    Nero version: 6.6.0.3 (Nero Express)
    Recorder: <_NEC DVD_RW ND-1300A> Version: 1.06 - HA 1 TA 1 - 6.6.0.3
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <HL-DT-ST DVD-ROM GDR8163B>Version: 0L23 - HA 1 TA 0 - 6.6.0.3
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : Maxtor 6Y120L0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : _NEC DVD_RW ND-1300A atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST DVD-ROM GDR8163 D: CDRom0
    _NEC DVD_RW ND-1300A E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 1023MB (1048048kB)
    Free physical memory: 487MB (498868kB)
    Memory in use : 52 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    30.5.2007
    ===== Disc-Copy over image - 1st step : Copy to image ...

    11:11:30 #1 Text 0 File Reader.cpp, Line 127
    Reader running

    11:11:30 #2 Text 0 File Writer.cpp, Line 122
    Writer Image Recorder running

    11:11:31 #3 Text 0 File DVDCopy.cpp, Line 279
    DVD Track-Information from source disc
    S01 T01 Con 0x14 Start 0 Len 1530080 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)

    11:11:31 #4 Text 0 File DVDCopy.cpp, Line 382
    Max -1 tracks of 1 allowed to copy
    1: 0 - 1530080 = 1530080, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

    11:11:31 #5 Text 0 File Burncd.cpp, Line 3151
    Turn on Disc-at-once, using DVD media

    11:11:31 #6 Text 0 File DlgWaitCD.cpp, Line 256
    Last possible write address on media: 2621439 (582:32.39, 5119MB)
    Last address to be written: 1529929 (339:59.04, 2988MB)

    11:11:31 #7 Text 0 File DlgWaitCD.cpp, Line 268
    Write in overburning mode: NO (enabled: CD)

    11:11:31 #8 Text 0 File DlgWaitCD.cpp, Line 2309
    Recorder: Image Recorder;
    CD type reading failed
    ATIP Data: ?

    11:11:31 #9 Text 0 File DlgWaitCD.cpp, Line 430
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    11:11:31 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (1 - Data (mode 1))
    2 indices, index0 (150) not provided
    original disc pos #0 + 1530080 (1530080) = #1530080/340:1.5
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1530080 blocks [Image Recorder]
    --------------------------------------------------------------

    11:11:31 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1040
    Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x40; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3133603840, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    1530080 | lead-out | 1 | 0x41 | 0x00

    11:11:31 #12 Phase 120 File dlgbrnst.cpp, Line 1832
    Creating the image for burning

    11:11:31 #13 Text 0 File ThreadedTransferInterface.cpp, Line 2596
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    11:11:55 #14 SCSI -1128 File Cdrdrv.cpp, Line 1430
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x05FA1000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x00
    CDB Data: 0x28 0x00 0x00 0x00 0x7C 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x7C 0xD0 0x0A
    0x00 0x00 0x00 0x00 0x11 0x00

    11:11:55 #15 TRANSFER -25 File Reader.cpp, Line 382
    Error reading data

    11:11:55 #16 Text 0 File Reader.cpp, Line 385
    Exception value: -1128

    11:11:55 #17 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    11:11:55 #18 Phase 22 File dlgbrnst.cpp, Line 1832
    Reading disc failed



    ===== Disc-Copy over image - 2nd step : Burn the image ...

    11:11:30 #1 Text 0 File Reader.cpp, Line 127
    Reader running

    11:11:30 #2 Text 0 File Writer.cpp, Line 122
    Writer Image Recorder running

    11:11:31 #3 Text 0 File DVDCopy.cpp, Line 279
    DVD Track-Information from source disc
    S01 T01 Con 0x14 Start 0 Len 1530080 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)

    11:11:31 #4 Text 0 File DVDCopy.cpp, Line 382
    Max -1 tracks of 1 allowed to copy
    1: 0 - 1530080 = 1530080, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

    11:11:31 #5 Text 0 File Burncd.cpp, Line 3151
    Turn on Disc-at-once, using DVD media

    11:11:31 #6 Text 0 File DlgWaitCD.cpp, Line 256
    Last possible write address on media: 2621439 (582:32.39, 5119MB)
    Last address to be written: 1529929 (339:59.04, 2988MB)

    11:11:31 #7 Text 0 File DlgWaitCD.cpp, Line 268
    Write in overburning mode: NO (enabled: CD)

    11:11:31 #8 Text 0 File DlgWaitCD.cpp, Line 2309
    Recorder: Image Recorder;
    CD type reading failed
    ATIP Data: ?

    11:11:31 #9 Text 0 File DlgWaitCD.cpp, Line 430
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    11:11:31 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (1 - Data (mode 1))
    2 indices, index0 (150) not provided
    original disc pos #0 + 1530080 (1530080) = #1530080/340:1.5
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1530080 blocks [Image Recorder]
    --------------------------------------------------------------

    11:11:31 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1040
    Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x40; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3133603840, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    1530080 | lead-out | 1 | 0x41 | 0x00

    11:11:31 #12 Phase 120 File dlgbrnst.cpp, Line 1832
    Creating the image for burning

    11:11:31 #13 Text 0 File ThreadedTransferInterface.cpp, Line 2596
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    11:11:55 #14 SCSI -1128 File Cdrdrv.cpp, Line 1430
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x05FA1000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x00
    CDB Data: 0x28 0x00 0x00 0x00 0x7C 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x7C 0xD0 0x0A
    0x00 0x00 0x00 0x00 0x11 0x00

    11:11:55 #15 TRANSFER -25 File Reader.cpp, Line 382
    Error reading data

    11:11:55 #16 Text 0 File Reader.cpp, Line 385
    Exception value: -1128

    11:11:55 #17 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    11:11:55 #18 Phase 22 File dlgbrnst.cpp, Line 1832
    Reading disc failed


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 16/07/2004 09:24:34
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 13:00:00 (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
  2. garmoon

    garmoon Regular member

    Joined:
    Oct 7, 2004
    Messages:
    4,841
    Likes Received:
    0
    Trophy Points:
    46
  3. IHoe

    IHoe Senior member

    Joined:
    May 21, 2005
    Messages:
    6,431
    Likes Received:
    0
    Trophy Points:
    116
    your NEC burner is old! and you're firmware is not up to date! So it will have a problem recognizing newer media that is out there.
     
    Last edited: May 30, 2007
  4. mgk

    mgk Member

    Joined:
    May 30, 2007
    Messages:
    52
    Likes Received:
    0
    Trophy Points:
    16


    Wow, many many thanks for the detailed replies, i shall go through each step as carefully as i can and report back.
     
  5. mgk

    mgk Member

    Joined:
    May 30, 2007
    Messages:
    52
    Likes Received:
    0
    Trophy Points:
    16
     
    Last edited: May 30, 2007
  6. IHoe

    IHoe Senior member

    Joined:
    May 21, 2005
    Messages:
    6,431
    Likes Received:
    0
    Trophy Points:
    116
    soooooo you are making a copy of a copy..... ok.... what you are experiencing is 2 things;

    1. the disk that you are trying to copy may be dirty..... use a residue free cleaning (alcohol, windex, or something that will dry fast) and a lint free cloth and apply the cleaner to the DVD.... then in straight lines....from the inner hub to the outer edge... wipe the cleaner off the disk in one motion till the disk is clean and free of smudges or finger prints.
    2. the disk that you are trying to copy is not of good quality and your drive can't read the disk! It has to read the disk before it can copy the disk! soooo if you are getting a 17:17:43 #16 TRANSFER -25 File Reader.cpp, Line 382 Error reading data
    you need to try to rip the disk first then copy! here is something to read about hard disks to rip:
    http://www.dvdplusvideo.com/petesguide9.html

     
    Last edited: May 30, 2007
  7. garmoon

    garmoon Regular member

    Joined:
    Oct 7, 2004
    Messages:
    4,841
    Likes Received:
    0
    Trophy Points:
    46
    Great stuff IHoe! Sounds like the disc itself is defective, it could still play correctly but copying could be a problem. Of course it could be dirty-hopefully and easily fixed.

    mgk

    I use this version (6.6.0.18) of Nero too, and it is the best one out; maybe better than any 7.x version! JM2C
     
  8. IHoe

    IHoe Senior member

    Joined:
    May 21, 2005
    Messages:
    6,431
    Likes Received:
    0
    Trophy Points:
    116
    I use 66018, too! No need to use version 7 yet.
     
  9. mgk

    mgk Member

    Joined:
    May 30, 2007
    Messages:
    52
    Likes Received:
    0
    Trophy Points:
    16
    Many thanks Ihoe,

    things are working again,

    yes i am copying a 'copy' ..... :) i should have said

    and i have closely examined the disc and can see many scratches albeit slight.

    I am usually careful when i handle discs but will take extra care from now on.
     
  10. IHoe

    IHoe Senior member

    Joined:
    May 21, 2005
    Messages:
    6,431
    Likes Received:
    0
    Trophy Points:
    116
    YW..... and welcome to Afterdawn!
     
  11. mgk

    mgk Member

    Joined:
    May 30, 2007
    Messages:
    52
    Likes Received:
    0
    Trophy Points:
    16



    Hi, just to give you an update, would appreciate any further advice ...



    Everything has been okay but intermittent. Was burning yesterday copying on the fly until still more burn errors/problems.

    I am still on nero 6.6.0.18 btw.

    but i have had the following errors [see below], even with verbatim cds

    have checked DMA is on everywhere, done defrag, uninstalled,ccleaner,etc re-booted etc

    Also i dont have an alternative to copy on the fly as i dont have an option to make my own dvd ?, i can burn dvd files yes, but not make my own dvd, do i not have any dvd plug-ins someone has said, where do i find them or upgrade ?

    Also my last two burn errors occurred right at the end of the burn. They more or less reached 99% in processing and failed ?

    This means i can play them on my dvd player but cant finalise them ? Can anything be done to play them on all players or do i sling the discs ?

    I am getting desperate, do i need to get a new drive ?

    Here are the errors ..


    [1]

    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 16/07/2004 09:24:34
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
    Nero Version: 6.6.0.18
    Internal Version: 6, 6, 0, 18e
    (Nero Express)
    Recorder: <_NEC DVD_RW ND-1300A> Version: 1.0C - HA 1 TA 1 - 6.6.0.18
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <HL-DT-ST DVD-ROM GDR8163B>Version: 0L23 - HA 1 TA 0 - 6.6.0.18
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : Maxtor 6Y120L0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : _NEC DVD_RW ND-1300A atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST DVD-ROM GDR8163B D: CDRom0
    _NEC DVD_RW ND-1300A E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 1023MB (1048048kB)
    Free physical memory: 561MB (575100kB)
    Memory in use : 45 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    8.6.2007
    CD Copy
    13:21:55 #1 Text 0 File Burncd.cpp, Line 2948
    _NEC DVD_RW ND-1300A
    Buffer underrun protection activated

    13:21:55 #2 Text 0 File Reader.cpp, Line 127
    Reader running

    13:21:55 #3 Text 0 File Writer.cpp, Line 122
    Writer _NEC DVD_RW ND-1300A running

    13:21:55 #4 Phase 48 File dlgbrnst.cpp, Line 1832
    Analyzing disc

    13:21:55 #5 CDCOPY -1 File CDCopy.cpp, Line 1912
    The CD is copyrighted

    13:21:56 #6 Text 0 File CDCopy.cpp, Line 2128
    _Index0_ _______Index1_______ PostPause ___LastBlockOfTrack_
    Track 1: 0 0 ( 0:02.00) 7052 7051 ( 1:36.01)
    Track 2: 7052 7202 ( 1:38.02) 246889 246888 ( 54:53.63)

    13:21:56 #7 Text 0 File CDCopy.cpp, Line 840
    Copy options: copy on-the-fly: ON
    read ISRC/MCN: OFF
    use jitter correction: OFF
    data options
    ignore read error: ON write defekt blocks OFF
    read raw data: OFF read r-w subchannel data: OFF
    audio options
    ignore read error: ON
    read indexes: OFF read r-w subchannel data: OFF
    source disc does not look like CD Extra
    01. 0 - 7202 = 7202, data (TRM_DATA_RAW_MODE2, block size 2352)
    02. 7202 - 246889 = 239687, data (TRM_DATA_RAW_MODE2, block size 2352)

    13:21:56 #8 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using CD-R/RW media

    13:21:56 #9 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 359846 ( 79:59.71)
    Last address to be written: 246888 ( 54:53.63)

    13:21:56 #10 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO (enabled: CD)

    13:21:56 #11 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: _NEC DVD_RW ND-1300A;
    CDR code: 00 97 27 06; OSJ entry from: DIGITAL STORAGE TECHNOLOGY CO.,LTD
    ATIP Data:
    Special Info [hex] 1: D0 00 A0, 2: 61 1B 06 (LI 97:27.06), 3: 4F 3B 48 (LO 79:59.72)
    Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

    13:21:56 #12 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    13:21:56 #13 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE2_2336 (1 - Data (mode 2))
    2 indices, index0 (150) not provided
    original disc pos #0 + 7052 (7052) = #7052/1:34.2
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE2_2336, 2336, config 0, wanted index0 0 blocks, length 7052 blocks [_NEC DVD_RW ND-1300A]
    1: TRM_DATA_MODE2_2336 (2 - Data (mode 2))
    2 indices, index0 (150) not provided
    original disc pos #7202 + 239687 (239687) = #246889/54:51.64
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE2_2336, 2336, config 0, wanted index0 0 blocks, length 239687 blocks [_NEC DVD_RW ND-1300A]
    --------------------------------------------------------------

    13:21:56 #14 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [_NEC DVD_RW ND-1300A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x20; Session Closed, disc fixated
    Tracks 1 to 2:
    1: TRM_DATA_MODE2_2336, 2336/0x00, FilePos 0 350400 16823872, ISRC ""
    2: TRM_DATA_MODE2_2336, 2336/0x00, FilePos 16823872 17174272 577083104, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    -150 | lead-in | 0 | 0x41 | 0x00
    -150 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    7052 | 2 | 0 | 0x41 | 0x00
    7202 | 2 | 1 | 0x41 | 0x00
    246889 | lead-out | 1 | 0x41 | 0x00

    13:21:56 #15 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 16x (2,400 KB/s)

    13:21:56 #16 SCSI -1189 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03B05600
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x02
    CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0xFF 0x40 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x02

    13:21:56 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2661
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    13:21:56 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2661
    Verifying disc position of item 1 (not relocatable, no disc pos, no patch infos, orig at #7202): write at #7202

    13:21:56 #19 Text 0 File Mmc.cpp, Line 17024
    StartDAO : CD-Text - Off

    13:21:56 #20 Text 0 File Mmc.cpp, Line 21774
    Set BUFE: Buffer underrun protection -> ON

    13:21:56 #21 Text 0 File Mmc.cpp, Line 17311
    CueData, Len=48
    41 00 00 24 00 00 00 00
    41 01 00 20 00 00 00 00
    41 01 01 20 00 00 02 00
    41 02 00 20 00 01 24 02
    41 02 01 20 00 01 26 02
    41 aa 01 24 00 36 35 40

    13:26:26 #22 SCSI -1135 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0BA50000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0x00 0x00 0x12 0x7C 0x00 0x00 0x1C 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x12 0x7B 0x0A
    0x00 0x00 0x00 0x00 0x0C 0x00

    13:26:26 #23 CDR -1135 File Writer.cpp, Line 311
    Write error

    13:26:27 #24 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    13:26:27 #25 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    13:26:27 #26 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 16x (2,400 KB/s)


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 16/07/2004 09:24:34
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 13:00:00 (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ======================================================




    [2]


    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 16/07/2004 09:24:34
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
    Nero Version: 6.6.0.18
    Internal Version: 6, 6, 0, 18e
    (Nero Express)
    Recorder: <_NEC DVD_RW ND-1300A> Version: 1.0C - HA 1 TA 1 - 6.6.0.18
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <HL-DT-ST DVD-ROM GDR8163B>Version: 0L23 - HA 1 TA 0 - 6.6.0.18
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : Maxtor 6Y120L0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : _NEC DVD_RW ND-1300A atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST DVD-ROM GDR8163B D: CDRom0
    _NEC DVD_RW ND-1300A E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 1023MB (1048048kB)
    Free physical memory: 516MB (528968kB)
    Memory in use : 49 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    8.6.2007
    DVD-Copy on the fly
    15:43:41 #1 Text 0 File Reader.cpp, Line 127
    Reader running

    15:43:41 #2 Text 0 File Writer.cpp, Line 122
    Writer _NEC DVD_RW ND-1300A running

    15:43:41 #3 Text 0 File DVDCopy.cpp, Line 293
    DVD Track-Information from source disc:
    Media Type: DVD+R
    S01 T01 Con 0x14 Start 0 Len 2086816 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)

    15:43:41 #4 Text 0 File DVDCopy.cpp, Line 406
    Max -1 tracks of 1 allowed to copy
    1: 0 - 2086816 = 2086816, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

    15:43:41 #5 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    15:43:41 #6 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2086815 (463:44.15, 4075MB)

    15:43:41 #7 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO (enabled: CD)

    15:43:41 #8 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: _NEC DVD_RW ND-1300A, Media type: DVD+R

    15:43:41 #9 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    15:43:41 #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (1 - Data (mode 1))
    2 indices, index0 (150) not provided
    original disc pos #0 + 2086816 (2086816) = #2086816/463:44.16
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2086816 blocks [_NEC DVD_RW ND-1300A]
    --------------------------------------------------------------

    15:43:41 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [_NEC DVD_RW ND-1300A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x40; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4273799168, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2086816 | lead-out | 1 | 0x41 | 0x00

    15:43:41 #12 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 4x (5,540 KB/s)

    15:43:41 #13 Text 0 File ThreadedTransferInterface.cpp, Line 2661
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    15:43:41 #14 SCSI -1066 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0BE60600
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x24 0x00

    15:43:41 #15 Text 0 File DVDPlusRW.cpp, Line 659
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    15:58:39 #16 Text 0 File WriterStatus.cpp, Line 116
    <_NEC DVD_RW ND-1300A > start writing Lead-Out at LBA 2086816 (1FD7A0h), lenght 0 blocks

    15:58:39 #17 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    15:59:41 #18 SCSI -1106 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 1, TA 1, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x73
    Sense Qual: 0x03
    CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x73 0x03

    15:59:46 #19 SCSI -1176 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 1, TA 1, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x72
    Sense Qual: 0x03
    CDB Data: 0x5B 0x01 0x06 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x72 0x03

    15:59:46 #20 CDR -1176 File ThreadedTransferInterface.cpp, Line 1916
    Session fixation error

    15:59:46 #21 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1916
    Could not perform end of Disc-at-once

    15:59:58 #22 Phase 127 File dlgbrnst.cpp, Line 1832
    Generating DVD high compatibility borders

    16:00:01 #23 Phase 129 File dlgbrnst.cpp, Line 1832
    Generating DVD borders completed successfully

    16:00:06 #24 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 4x (5,540 KB/s)


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 16/07/2004 09:24:34
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 13:00:00 (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)




     
  12. garmoon

    garmoon Regular member

    Joined:
    Oct 7, 2004
    Messages:
    4,841
    Likes Received:
    0
    Trophy Points:
    46
    @mgk

    If you're using Nero Express as indicated by your log, you should be able to stop copying on the fly!! Open Nero Express >select copy entire DVD> In the next window where the source and destination are selected, just under those, UNCHECK quick copy. This will make Xpress copy to HD before the burn. Something's wrong with your set up if you can't do that.
     
  13. _lonewolf

    _lonewolf Member

    Joined:
    Jun 12, 2013
    Messages:
    9
    Likes Received:
    0
    Trophy Points:
    11
    Yes, your driver might be old, but the problem could also be the copywright on the dvd your trying to copy. Download DVD43. This will decrypt the copywright and let nero read the disk.
     

Share This Page