Originally posted by jvc674:
hey brillo i just got my viewsat ultra i need to learn how to program this box, can you help
I suggest using the JUMP drive.
A. Loading your BIN using Null cable:
? Connect serial cable (NULL) to PC>STB
? Open up Loader of choice (PVR-Loader 1.1 or Loader2)
? Click on Tool>Configuration>Com port (Default is com 1)
? Click on Open File
? Click on PC>STB (Notice the progression bar in loader)
? Turn the power in the back ON
? Wait for Loader say Completed. Then on box LCD front panel screen say I.N.S.T>END>0000 or until clock count to 0.001
IT IS VERRY IMPORTANT. DO NOT TURN THE POWER OFF TO SOON
? Turn the power OFF in front and power OFF in back
? After downloading the “BIN”, unhook NULL cable from PC>STB
? Connect all the cables to your box/TV
? Turn the power ON in the front and back
? Press Menu key
? Select Installation and press OK
? Select Antenna Setup and press OK
? Select your Sat.
? Here if you have a DISEqC switch enter the port #, Motor or Legacy SW
? No LNB Type need to select (from new, you have only two selection Standard and Universal). STB will select your LNB Automatic
? Press Exit and select Yes for saving the settings
? Your back to Antenna Setup screen
? Here you have Three choices:
1. Channel Scan
2. Auto Scan
3. Blind Scan
? Select Auto Scan
? Press OK
? You are in the Auto Scan window and you see the Bird(Sat.) you selected and on the top of your screen are three options:
1. Search option
2. Network search
3. Scan Start
? You don’t change nothing here, go down and select Scan Start and press OK
? You do this for all the Birds (Sat.) you have
? Wait for Autoroll and watch TV
B. Loading your BIN using USB Jump Drive
? Connect all the cables to your box/TV
? Turn the power ON from the front and back switch
? Press Menu key
? Select Installation and press OK
? Select Antenna Setup and press OK
? Select your Sat.
? Here if you have a DISEqC switch enter the port #, Motor or Legacy SW
? No LNB Type need to select (from new, you have only two selection Standard and Universal). STB will select your LNB Automatic
? Press Exit and select Yes for saving the settings
? Your back to Antenna Setup screen
? Here you have Three choices:
1. Channel Scan
2. Auto Scan
3. Blind Scan
? Select Auto Scan
? Press OK
? You are in the Auto Scan window and you see the Bird(Sat.) you selected and on the top of your screen are three options:
1. Search option
2. Network search
3. Scan Start
? You don’t change nothing, go down and select Scan Start and press OK
? You do this for all the Birds (Sat.) you have
? Now its time to download your BIN ( Newest bins here
http://forums.f2atv.com/showthread.php?t=103801
? Insert the Memory Stick in your PC and transfer the bin in. Than insert in your STB and in the Main Menu select System information and press OK
? Select Receiver Upgrade and press OK
? Go down to the bottom of the window, select USB and press OK
? A new window opens with some Korean files, years, etc.
? In the bottom of the window, it is your bin selects and presses OK
VERY IMPORTANT. DO NOT TURN THE POWER OFF
? After you load the bin, the STB will reboot automatic
? Wait for Autoroll and watch TV
