problem with my EURoVOX

i've had my 2006 version Box about 6 Months and it's been working fine but last Sunday i did a Power Scan because i was searching for the new Liverpool FC Channel.ever since i did that there are no Channels at all coming up,it just keeps saying no Signal.
does anyone know what i've done wrong and what i might be able to do to fix it?
cheers

 

Did you do a full powerscan? What provider are you on and where are you located. Also press menu, config and system info and post what it says please.

 

System Information
Model: DVB-XC BOX
S/W Ver: 1.0 SSC$ Jan 25 2007
H/W Ver: 2.0 Jan 25 2007
Bootstrap: v002
Website: -----

i did both a full Power Scan and a Normal Power Scan.i've done that loads of times before and had no problems.
i'm in the Dublin 7 Area and am on NTL

 

Your firmware is out of date I would recommend updating it. But thats another story.

I am in Dublin also on N** so I know it not a problem with N**.

Go to menu,installation, user installation and tell me how many transponders it shows.

 

i'm off to Work in a couple of Mins so wont have time to do it now but as soon as i get home i'll do it and post the results.
thanks for the help mate

 

Hi , before you do a power scan , you should always delete the channels as you end up with channels saying no signal , do that first , then do your power scan ,when you power scan it may preset the incorrect symbol rate , so when in normal enter your start freq at say 250 and your end freq 500 , make sure the symbol rate is 6887 , then go back up and change the normal to full scan and press ok . this should find your transponders.

 

thanks a lot gracem,i tried that and now i have 51 Channels.
that's an awful lot less than what i did have (about 140)
is there any way i can get back all the Channels i had?
cheers.

 

try it again but put a .5 in so start at 250.5 ...good look other than that we should be able to get you the freq to enter manually

 

291.5,299.5,307.5,315.5,323.5,339.5,347.5,355.5,363.5,
371.5,379.5,394.5,402.5

try entering these i dont know if its all of them

 

sorry mate,i don't know what you mean by transponders.not too clued in on these Boxes to be honest.

i took the advice gracem gave me and that got me back some of the Channels...

 

i'm trying that other scan with the .5 as i Type.
forgive my ignorance but how would i enter those Codes?
sorry but i'm new to all this stuff

 

No problem do as I said go to menu, installation, user installation, check what frequencies it has in there, post the frequencies your box has here. BTW there is some work going on at the moment so some transponsers are been affected.

 

tried that and i now have 121 Channels,thanks a Million.
while i have the attention of someone who knows what they're talking about could you tell me is it possible to scan for just 1 Channel without risking the whole lot?
i'm really keen to get this Liverpool FC Channel (that's what got me into all the trouble in the first place).it was Rangers TV up to last Weekend but NTL have changed it now.

 

291.500 Mhz
299.500
307.500
315.500
323.500
339.500
347.500
355.500
363.500
371.500
379.500.
thanks a Million for all this help lads,this Forum really is a Godsend.
cheers

 

Thats why I have asked for your frequency list to see which ones you are missing?

 

Now you are only missing 394.500 and 402.000. To add these go to menu,installation,user installation and use the on button guide to add frequencies. Info button will name them as you like preferably 0013 and 0014.

I posted this solution nearly three week ago
http://forums.afterdawn.com/thread_view.cfm/558409

 

i've been reading that link you posted.
for some reason this Box wont let me do a Manual Scan,don't know why.
I go to menu,installation,user installation but when i press the Blue Button on the Remote for Manual Scan nothing happens

 

For any frequency that you want to manually scan you select it in your list first by pressing OK when it is highlighted, ( a tick will appear beside the one you select), then you press the blue button to manually scan that frequency.


But as I state in the link you must add the two missing frequencies first.

 

i seemed to have sussed it out now mate.thanks a Million for all your help,really appreciate it.
that Liverpool FC Channel is coming in now.it keeps coming and going,No Signal comes up from time to time,but that's better than nothing.
this time last Night i thought i was going to have to throw the Box in the Bin,thankfully not.
thanks again mate,really helpfull

 

No problem if you are still having problems with LFCTV you can do as grace said and change the frequency by 500Hz although they are still messing about with it and it may settle after a day or two. What frequency did you choose 394.000 or 394.500. I have it on 394.000 and not a problem with it.