Thanks Lots, flashed the new firmware, went back to the other Nero and made it so dma is the only choice. Back to burning again!!

You are very welcome BigD.

Happy burning.

Another newbie with Illegal Disk. I've been following this thread while trying to determine what has gone wrong with my system. I was burning fine with 7.0.14b and two Lite-On drives, SOHW-1693S and 1673S. Several items in the system changed at about the same time. Upgraded to Nero7 7.0.54, upgraded to Norton Internet Security 2006.

I purchased the new SHW-160P6S just to be sure it wasn't some hardware glitch.

I back rev'd to the latest Nero6 with the same results. I cleaned out all the Nero files and installed the OEM v6 that came with the burner. No updates to it and it burned perfectly with all drives.

I then installed 7.0.14 and the results are listed below.

I also went back to some archived .ISO files that I have burned dozens of times, DVD demos. No protection or copyright and still got the Illegal Disk.

I have been burning with Memorex and TDK discs. The 160P6S burned fine at 16X with both when using the old OEM Nero6.

DMA is on.

I'm stumpped, frustrated and about ready to format c: and start fresh. Something is interferring with Nero and I can't find it.

There may be newer firmware for the new Lite-on but both my older units were up to date.

Nero starts with the leadin and appears to hang but the burner is still burining and after a few minutes give the illegal disk error. When looking at the DVD it has been written 30-50%. I have about 20 coasters in the trash trying to figure this out and up to this point I haven't had a coaster in probably more than a year...

Thanks,
Lee

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
Nero Version: 7.0.1.4
Internal Version: 7, 0, 1, 4

Recorder: <LITE-ON DVDRW SHW-160P6S>Version: PS05 - HA 1 TA 0 - 7.0.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <LITE-ON DVDRW SHW-160P6S>Version: PS05 - HA 1 TA 0 - 7.0.1.4
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y250P0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3300631A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : LITE-ON DVDRW SHW-160P6S atapi Port 1 ID 0 DMA: On
DiskPeripheral : Promise Array 1.10 ftsata2 Port 2 ID 0 DMA: Off
OtherPeripheral : Promise RAID Console 1.00 ftsata2 Port 2 ID 4 DMA: Off

=== CDRom-Device-Map ===
LITE-ON DVDRW SHW-160P6S E: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047772kB)
Free physical memory: 426MB (437192kB)
Memory in use : 58 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

22.2.2006
Burn DVD Image
9:20:01 PM #1 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory

9:20:01 PM #2 Text 0 File Reader.cpp, Line 124
Reader running

9:20:01 PM #3 Text 0 File Writer.cpp, Line 113
Writer E: LITE-ON DVDRW SHW-160P6S running

9:20:01 PM #4 Text 0 File Burncd.cpp, Line 3342
Turn on Disc-At-Once, using DVD media

9:20:01 PM #5 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1571944 (349:19.19, 3070MB)

9:20:01 PM #6 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)

9:20:01 PM #7 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: LITE-ON DVDRW SHW-160P6S, Media type: DVD-R
Disc Manufacturer: TTH02 -
Disc Application Code: 64, Disc Physical Code: 193

9:20:01 PM #8 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================

9:20:01 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 1571945 (1571945) = #1571945/349:19.20
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1571945 blocks [E: LITE-ON DVDRW SHW-160P6S]
--------------------------------------------------------------

9:20:01 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: LITE-ON DVDRW SHW-160P6S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3219343360, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1571945 | lead-out | 1 | 0x41 | 0x00

9:20:01 PM #11 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

9:20:01 PM #12 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started

9:20:01 PM #13 Text 0 File Burncd.cpp, Line 4176
Cache writing successful.

9:20:01 PM #14 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed

9:20:01 PM #15 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 12x (16,620 KB/s)

9:20:01 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

9:20:01 PM #17 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode

9:20:01 PM #18 Text 0 File MMC.cpp, Line 21611
Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON

9:20:01 PM #19 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes

9:20:01 PM #20 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

9:20:46 PM #21 Text 0 File Cdrdrv.cpp, Line 1197
21:20:46.625 - E: LITE-ON DVDRW SHW-160P6S : Queue again later

9:22:50 PM #22 SPTI -1046 File SCSIPassThrough.cpp, Line 323
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 00 00 00 17 A0 00 00 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05
Buffer x052f0000: Len x10000
0x00 00 01 BA 44 02 24 94 D5 01 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 00 9F B3 37 10 7B F5 2F A8
0xD6 CE FF 73 A0 06 44 20 18 12 98 6F 4F C8 6E 77

9:22:50 PM #23 CDR -1046 File Writer.cpp, Line 302
Illegal disc
E: LITE-ON DVDRW SHW-160P6S

9:22:50 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

9:22:50 PM #25 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

9:22:50 PM #26 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was 6047

9:22:50 PM #27 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 12x (16,620 KB/s)


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 1/25/2006 6:50:09 PM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Quote:

---

Recorder: <LITE-ON DVDRW SHW-160P6S>Version: PS05

---

You were right, there is an update for your drive, current version is PS08: http://forum.rpc1.org/dl_result.php?kaj=1&isces

Quote:

---

Disc Manufacturer: TTH02 -
Disc Application Code: 64, Disc Physical Code: 193

---

These are the TDK's that you state you use along with the Memorex, I'm sure you know what mosts views of Memorex are here at AD and TDK doesn't fall far from that tree. I would suggest a better brand of media such as Verbatim, Taiyo Yuden or Sony, Fuji, Maxell ( made in Japan). But update the firmware first to see if things get straightened out.

Quote:

---

Burn process started at 12x (16,620 KB/s)

---

Whoa horsey, that is way too high for those discs...try 4X and work your way up from there when you start getting successful burns.

Quote:

---

Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)

---

Yup, your burner doesn't like those discs...a firmware update may take care of this. Everything else looks peachy.

i'll just comment on this bit -

Quote:

---

I have been burning with Memorex and TDK discs.

---

- two very bad choices if you want your movies to last..

The spindle of Memorex (50) was about 1/2 full, the TDK was a fresh one I got for testing. Well I won't argue about the quality and will be upgrading DVDs. I'll try to keep this short.

Nothing I seemed to do could get me burning. I completely removed 7.0.14 and used the clean tools from Nero. Installed the OEM v6 and burned the .ISO I had been working with, both Memorex and TDK but at 8x.

I flashed the 160P6 with the latest firmware and removed v6 OEM, then installed 7.0.54. Got the original DVD and ripped it to an ISO again. Same Illegal Disk error when trying to burn with 7.0.54

Tried an ISO from a movie I had ripped in the past. Same error. Ripped the movie again, AnyDVD and Shrink, AnyDVD DVD Decryptor then Shrink. Same error when burning.

Tried a different tact, ripped with Recode from 7.0.54 and AnyDVD but ripped to a NRG file.

The Memorex burned and verified at 12x with no issue, movie plays fine. Could only get 8x out of the TDK and the verify was iffy. The memorex verified smoothly with the reads progressing from 6.5x to 15.1x. After about 50% on the TDK verify the read rates started jumping around but it verified and played.

The 'crappy' TDK are being returned today, purchased locally. The 12x attempt with the TDK resulted in a partial burn, I don't know what else to call it. Looking at the bottom of the DVD, there were unburned areas.

I'm sure the two stores I get DVDs from have Maxell and Verbatim. I was very happy with the results I got with the DL Verbatims.

Bottom line, I still cannot burn a ISO file for some reason but using Recode to produce a NRG file is working fine.

I will take both your advice and upgrade the DVDs.

The inability to burn a ISO will remain a mystery for the time being.

Thanks for the help, I'll be sure to post any new developments.

Lee

I almost forgot, downloaded CloneDVD2 and tried to burn one of the ISO files without success. I did not try a fresh rip/burn.

Since you are willing to experiment, why not try to burn your ISO with Imgburn. It is a free proggy, can be found here: http://www.imgburn.com

Here is the result with Imgburn... Is there some virus or whatever that attacks ISO files? Actually the logs says the media is bad not the ISO file. This ISO was good in the past, several burns were made from it. I burned several movies last night from the spindle that this DVD came from. Burned at 12x also. If Imgburn will burn from files, I will try that next.

Thanks,
Lee

I 20:55:59 ImgBurn Version 1.2.0.0 started!
I 20:55:59 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)
I 20:55:59 Initialising SPTI...
I 20:55:59 Searching for SCSI / ATAPI devices...
I 20:55:59 Found 1 DVD±RW!
I 20:59:11 Operation Started!
I 20:59:11 Source File: D:\Burner\Movies\XXX_XXX.ISO
I 20:59:11 Source File Sectors: 2,031,532 (MODE1/2048)
I 20:59:11 Source File Size: 4,160,577,536 bytes
I 20:59:11 Source File Implementation Identifier: DVD Shrink
I 20:59:11 Destination Device: [1:0:0] LITE-ON DVDRW SHW-160P6S PS08 (E:) (ATA)
I 20:59:11 Destination Media Type: DVD-R (Disc ID: CMC MAG. AM3) (Speeds: 6x, 8x, 12x, 16x)
I 20:59:11 Destination Media Sectors: 2,297,888
I 20:59:11 Write Mode: DVD
I 20:59:11 Write Type: DAO
I 20:59:11 Write Speed: 8x
I 20:59:11 Link Size: Auto
I 20:59:11 Test Mode: Yes
I 20:59:11 BURN-Proof: Enabled
I 20:59:11 Filling Buffer...
I 20:59:12 Writing LeadIn...
I 20:59:25 Writing Image...
W 21:01:16 Failed to Write Sectors 7520 - 7551 - Cannot Write Medium - Incompatible Format
W 21:01:16 Retrying (1 of 20)...
I 21:01:28 Abort Request Acknowledged
W 21:01:29 Retry Failed - Cannot Write Medium - Incompatible Format
W 21:01:29 Retrying (2 of 20)...
I 21:01:36 Synchronising Cache...

Here is an Imgburn attempt with a NRG file I made and burned three DVDs from last night. I'll take this same DVD and burn from Nero with it. Next post.

I 21:13:06 ImgBurn Version 1.2.0.0 started!
I 21:13:06 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)
I 21:13:06 Initialising SPTI...
I 21:13:06 Searching for SCSI / ATAPI devices...
I 21:13:06 Found 1 DVD±RW!
I 21:15:19 Operation Started!
I 21:15:19 Source File: D:\Burner\Movies\xxx_xxx.nrg
I 21:15:19 Source File Sectors: 2,071,840 (MODE1/2048)
I 21:15:19 Source File Size: 4,243,128,320 bytes
I 21:15:19 Source File Application Identifier: NERO BURNING ROM
I 21:15:19 Source File Implementation Identifier: Nero
I 21:15:19 Destination Device: [1:0:0] LITE-ON DVDRW SHW-160P6S PS08 (E:) (ATA)
I 21:15:19 Destination Media Type: DVD-R (Disc ID: CMC MAG. AM3) (Speeds: 6x, 8x, 12x, 16x)
I 21:15:19 Destination Media Sectors: 2,298,496
I 21:15:19 Write Mode: DVD
I 21:15:19 Write Type: DAO
I 21:15:19 Write Speed: 8x
I 21:15:19 Link Size: Auto
I 21:15:19 Test Mode: Yes
I 21:15:19 BURN-Proof: Enabled
I 21:15:19 Filling Buffer...
I 21:15:19 Writing LeadIn...
I 21:15:32 Writing Image...
W 21:17:23 Failed to Write Sectors 21696 - 21727 - Cannot Write Medium - Incompatible Format
W 21:17:23 Retrying (1 of 20)...
I 21:17:33 Abort Request Acknowledged
W 21:17:36 Retry Failed - Cannot Write Medium - Incompatible Format
W 21:17:36 Retrying (2 of 20)...
I 21:17:43 Synchronising Cache...
I 21:18:10 Cycling Tray after Test Write...
E 21:18:27 Failed to Write Image!
E 21:18:27 Operation Aborted! - Duration: 00:03:08
I 21:18:27 Average Write Rate: 349 KB/s (0.3x) - Maximum Write Rate: 8,837 KB/s (6.4x)


Lee

Is there a way to save or display the log file from Nero when the burn is complete? I didn't get back in time to copy the log. But that same DVD that failed in the previous posts burned and verified at 8x with Nero 7.0.5.4. Go figure?

Lee

Quote:

---

(Disc ID: CMC MAG. AM3)

---

This is your illegal disc, since you won't take my word for it, here is some reading for you:

http://forums.afterdawn.com/thread_view.cfm/262544

Edit: My Nero asks me if I want to save the log after each burn.

The problem is not with the ISO, it is the discs you are using. While you may have gotten a few good burns with them, you can always count on some failures with them sooner or later you will get a failure. This is the problem with CMC Mag coded discs, the quality is so sporatic and poor that even if you get a good burn...6 months or better down the road, those discs will start to deteriorate and the dye will break up, leaving you with a useless backup.

@LOCOENG, quite a NICE lengthy thread you have here, cheers.

@GPL40, I have one word that will describe that media..........CRAP

Dont let MaxBurn see it!!!

I'll buy a spindle of Maxells or Verbatims today.

On the log, I'll see if there is a setting I may not have checked.

Thanks,
Lee

If you get the Maxell's make sure the label reads Made in Japan, it doesn't matter for the Verbatims.

Started a set of 12 hour shifts tonight, might be midweek before I can test new DVDs. The Maxells said Taiwan... and the Verbatims were VERY expensive. I'll try Best Buy. Maybe I shouldn't be so cheap :)

Checked Nero Burning Rom settings, saw nothing dealing with logs. The only log that appears, disappears at the end of the burn unless there is a problem. ??

Again, thanks for the help,
Lee

Just for info, Best Buy Online has the 25 spindle Verbatim DVD-R 16x on sale for $7.99. Ordered a few for store pickup.

Same for the 25 spindle of +R

Maybe we can put the final nail in this coffin this week :)

Lee

I've got my fingers crossed.

hello there,i was trying to burn a data mp3 dvd the other day it copyed to a DVD+R no problem,tryed to burn on a dvd-and all i made was a load of coasters!confusing me because i have used this media before.My friend as flashed my drive with the latest firmware,still unable to use dvd- i am aware i am using a older version of Nero but read so many bad reports about upgrading to Nero 7 would be grateful if somebody could help me out heres the Nero log
User
ome

ndows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 22/12/1997 20:23:24
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32

NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
(Nero Express)
Recorder: <LITE-ON DVDRW SOHW-1693S>Version: KC4B - HA 1 TA 4 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <LITE-ON DVDRW SOHW-1693S>Version: KC4B - HA 1 TA 4 - 6.6.1.4
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 nvatabus Port 0 ID 0 DMA: Off
DiskPeripheral : HDS722580VLAT20 nvatabus Port 0 ID 1 DMA: Off
CdRomPeripheral : SAMSUNG CDRW/DVD SM-348B nvatabus Port 0 ID 2 DMA: Off
CdRomPeripheral : LITE-ON DVDRW SOHW-1693S nvatabus Port 0 ID 3 DMA: Off
CdRomPeripheral : Generic STEALTH DVD st3tiger Port 1 ID 0 DMA: Off

=== CDRom-Device-Map ===
SAMSUNG CDRW/DVD SM-348B E: CDRom0
LITE-ON DVDRW SOHW-1693S F: CDRom4
Generic STEALTH DVD G: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 767MB (785904kB)
Free physical memory: 482MB (493628kB)
Memory in use : 37 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

25.2.2006
===== Disc-Copy over image - 1st step : Copy to image ...

18:05:51 #1 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

18:05:51 #2 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

18:05:51 #3 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 192KB of Memory

18:05:51 #4 Text 0 File Reader.cpp, Line 124
Reader running

18:05:51 #5 Text 0 File Writer.cpp, Line 122
Writer Image Recorder running

18:05:51 #6 Text 0 File DVDCopy.cpp, Line 292
DVD Track-Information from source disc:
Media Type: DVD-R
S01 T01 Con 0x14 Start 0 Len 2036544 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)

18:05:51 #7 Text 0 File DVDCopy.cpp, Line 405
Max -1 tracks of 1 allowed to copy
1: 0 - 2036544 = 2036544, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

18:05:51 #8 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media

18:05:51 #9 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 4718591 (1048:34.41, 9215MB)
Last address to be written: 2036543 (452:33.68, 3977MB)

18:05:51 #10 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)

18:05:51 #11 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================

18:05:51 #12 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2036544 (2036544) = #2036544/452:33.69
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2036544 blocks [Image Recorder]
--------------------------------------------------------------

18:05:51 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4170842112, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2036544 | lead-out | 1 | 0x41 | 0x00

18:05:51 #14 Phase 120 File dlgbrnst.cpp, Line 1685
Creating the image for burning

18:05:51 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

18:10:30 #16 Text 0 File WriterStatus.cpp, Line 116
< Image Recorder > start writing Lead-Out at LBA 2036544 (1F1340h), lenght 0 blocks

18:10:30 #17 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

18:10:31 #18 Phase 121 File dlgbrnst.cpp, Line 1685
Creating Image completed successfully



===== Disc-Copy over image - 2nd step : Burn the image ...

18:10:39 #1 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 81920KB of Memory

18:10:40 #2 Text 0 File Reader.cpp, Line 124
Reader running

18:10:40 #3 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SOHW-1693S running

18:10:40 #4 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 4170842112
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=452:33.69 ( 2036544) RecDep=0x00
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <D:\My Documents\TempImage.nrg>

18:10:40 #5 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media

18:11:11 #6 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2036543 (452:33.68, 3977MB)

18:11:11 #7 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)

18:11:11 #8 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: LITE-ON DVDRW SOHW-1693S, Media type: DVD-R
Disc Manufacturer: TTG02 -
Disc Application Code: 64, Disc Physical Code: 193

18:11:11 #9 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD DL.)

18:11:11 #10 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 2036544 (2036544) = #2036544/452:33.69
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2036544 blocks [LITE-ON DVDRW SOHW-1693S]
--------------------------------------------------------------

18:11:12 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [LITE-ON DVDRW SOHW-1693S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4170842112, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2036544 | lead-out | 1 | 0x41 | 0x00

18:11:12 #12 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

18:11:12 #13 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

18:11:12 #14 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 4x (5,540 KB/s)

18:11:12 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

18:11:12 #16 Text 0 File DVDR.cpp, Line 2707
Recording mode: Sequential Recording Mode

18:11:12 #17 Text 0 File DVDR.cpp, Line 2863
Start write address at LBA 0
DVD high compatibility mode: Yes

18:11:12 #18 Text 0 File Cdrdrv.cpp, Line 8647
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

18:11:48 #19 Text 0 File Cdrdrv.cpp, Line 1200
18:11:48.796 - F: LITE-ON DVDRW SOHW-1693S : Queue again later

18:15:35 #20 SPTI -1046 File SCSIPassThrough.cpp, Line 289
F: CdRom4: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 00 00 00 05 60 00 00 20 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 30 05
Buffer x036b0000: Len x10000
0x02 30 00 0A 00 11 84 43 01 B0 82 01 58 6C 71 C2
0xB2 96 AD 7D F8 BD 02 33 30 60 0A 0B 14 20 44 28
0x9F 98 AC AF 69 D1 D4 C2 D6 96 9E 2A 14 5B 62 FF

18:15:35 #21 CDR -1046 File Writer.cpp, Line 311
Illegal disc
F: LITE-ON DVDRW SOHW-1693S

18:15:35 #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

18:15:35 #23 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

18:15:35 #24 Text 0 File DVDR.cpp, Line 3103
EndDAO: Last written address was 1375

18:15:35 #25 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 4x (5,540 KB/s)


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 22/12/1997 21:02:46
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 11/03/2005 22:28:09 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Quote:

---

Recorder: <LITE-ON DVDRW SOHW-1693S>Version: KC4B

---

Is this hacked fw or something because it does not match up for a Lite-on 1693S

http://forum.rpc1.org/dl_firmware.php?download_id=2056

http://www.liteonit.com/ODD/English/e_downloads/e_firmware_dvd%20...

Quote:

---

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 nvatabus Port 0 ID 0 DMA: Off
DiskPeripheral : HDS722580VLAT20 nvatabus Port 0 ID 1 DMA: Off
CdRomPeripheral : SAMSUNG CDRW/DVD SM-348B nvatabus Port 0 ID 2 DMA: Off
CdRomPeripheral : LITE-ON DVDRW SOHW-1693S nvatabus Port 0 ID 3 DMA: Off
CdRomPeripheral : Generic STEALTH DVD st3tiger Port 1 ID 0 DMA: Off

---

Your DMA is off on all these drives. But I am not sure if you can get it turned on using nvidia drivers, which will sometimes cause conflicts with Nero

http://home.comcast.net/~bbmayo/checking%20DMA.pdf

What brand of media are you using. Make sure you are using a reputable brand Sony, Verbatim, Maxell or Fuji.

You don't need to upgrade Nero, you need to downgrade...

Quote:

---

Nero Version: 6.6.1.4

---

The version you are using has yet to have the wrinkles ironed out of it yet, revert back to version 6.6.0.18, it is a known working version. Get it here:


http://httpdl2.usw.nero.com/Nero-6.6.0.18.exe
http://httpdl1.usw.nero.com/Nero-6.6.0.18.exe

Quote:

---

Disc Manufacturer: TTG02 -
Disc Application Code: 64, Disc Physical Code: 193

---

These should be TDK discs, and do not come highly recommended, try some Verbatim or Taiyo Yuden, Sony, Maxell (made in Japan).




Edit: I see arnie has beaten me to the punch...

TY LOCO you got better eyes than me, lol :)

Em all i know is these dvd- worked before lol cheap disks on a spindle which my mate supplied!will try and dwn grade Nero see if that helps i havent got any of his disks left i made coasters with them lol.Was wondering if any programes were conflicting with Nero ie any dvd,clone dvd2,clone cd etc or musicmatch

Roxio is known to cause conflicts with Nero, but I don't see it's drivers listed in your log.

Read it and weep :) 8X first, 16x second Verbatim 16x -R

I'm a believer, thank you all for your help and esp Loco for his patience!!

- - - - - - - - - - - -

1C82

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
Nero Version: 7.0.5.4
Internal Version: 7, 0, 5, 4

Recorder: <LITE-ON DVDRW SHW-160P6S>Version: PS08 - HA 1 TA 0 - 7.0.5.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <LITE-ON DVDRW SHW-160P6S>Version: PS08 - HA 1 TA 0 - 7.0.5.4
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y250P0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3300631A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : LITE-ON DVDRW SHW-160P6S atapi Port 1 ID 0 DMA: On
DiskPeripheral : Promise Array 1.10 ftsata2 Port 2 ID 0 DMA: Off
OtherPeripheral : Promise RAID Console 1.00 ftsata2 Port 2 ID 4 DMA: Off

=== CDRom-Device-Map ===
LITE-ON DVDRW SHW-160P6S E: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1047772kB)
Free physical memory: 412MB (422576kB)
Memory in use : 59 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

27.2.2006
Burn DVD Image
4:08:38 PM #1 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory

4:08:38 PM #2 Text 0 File Reader.cpp, Line 124
Reader running

4:08:38 PM #3 Text 0 File Writer.cpp, Line 113
Writer E: LITE-ON DVDRW SHW-160P6S running

4:08:38 PM #4 Text 0 File Burncd.cpp, Line 3341
Turn on Disc-At-Once, using DVD media

4:08:38 PM #5 Text 0 File DlgWaitCD.cpp, Line 288
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286009 (508:00.09, 4464MB)

4:08:38 PM #6 Text 0 File DlgWaitCD.cpp, Line 300
Write in overburning mode: NO (enabled: CD)

4:08:38 PM #7 Text 0 File DlgWaitCD.cpp, Line 2699
Recorder: LITE-ON DVDRW SHW-160P6S, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193

4:08:38 PM #8 Text 0 File DlgWaitCD.cpp, Line 472
>>> Protocol of DlgWaitCD activities: <<<
=========================================

4:08:38 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2286010 (2286010) = #2286010/508:0.10
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286010 blocks [E: LITE-ON DVDRW SHW-160P6S]
--------------------------------------------------------------

4:08:38 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: LITE-ON DVDRW SHW-160P6S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681748480, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286010 | lead-out | 1 | 0x41 | 0x00

4:08:38 PM #11 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

4:08:38 PM #12 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

4:08:38 PM #13 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started

4:08:38 PM #14 Text 0 File Burncd.cpp, Line 4175
Cache writing successful.

4:08:38 PM #15 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed

4:08:38 PM #16 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 8x (11,080 KB/s)

4:08:38 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

4:08:38 PM #18 Text 0 File DVDR.cpp, Line 2699
Recording mode: Sequential Recording Mode

4:08:38 PM #19 Text 0 File DVDR.cpp, Line 2855
Start write address at LBA 0
DVD high compatibility mode: Yes

4:08:38 PM #20 Text 0 File Cdrdrv.cpp, Line 8663
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

4:09:25 PM #21 Text 0 File Cdrdrv.cpp, Line 1210
16:09:25.062 - E: LITE-ON DVDRW SHW-160P6S : Queue again later

4:16:39 PM #22 Text 0 File WriterStatus.cpp, Line 116
<E: LITE-ON DVDRW SHW-160P6S> start writing Lead-Out at LBA 2286010 (22E1BAh), length 0 blocks

4:16:39 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

4:16:39 PM #24 Text 0 File DVDR.cpp, Line 3095
EndDAO: Last written address was 2285999

4:17:19 PM #25 Phase 37 File dlgbrnst.cpp, Line 1730
Burn process completed successfully at 8x (11,080 KB/s)

4:17:19 PM #26 Phase 78 File dlgbrnst.cpp, Line 1730
Data verification started

4:22:25 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

4:22:25 PM #28 Phase 80 File dlgbrnst.cpp, Line 1730
Data verification completed successfully


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 1/25/2006 6:50:09 PM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

- - - - - - - - - - - - - - - -

1C82

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
Nero Version: 7.0.5.4
Internal Version: 7, 0, 5, 4

Recorder: <LITE-ON DVDRW SHW-160P6S>Version: PS08 - HA 1 TA 0 - 7.0.5.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <LITE-ON DVDRW SHW-160P6S>Version: PS08 - HA 1 TA 0 - 7.0.5.4
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y250P0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3300631A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : LITE-ON DVDRW SHW-160P6S atapi Port 1 ID 0 DMA: On
DiskPeripheral : Promise Array 1.10 ftsata2 Port 2 ID 0 DMA: Off
OtherPeripheral : Promise RAID Console 1.00 ftsata2 Port 2 ID 4 DMA: Off

=== CDRom-Device-Map ===
LITE-ON DVDRW SHW-160P6S E: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1047772kB)
Free physical memory: 416MB (426548kB)
Memory in use : 59 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

27.2.2006
Burn DVD Image
4:24:38 PM #1 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory

4:24:38 PM #2 Text 0 File Reader.cpp, Line 124
Reader running

4:24:38 PM #3 Text 0 File Writer.cpp, Line 113
Writer E: LITE-ON DVDRW SHW-160P6S running

4:24:38 PM #4 Text 0 File Burncd.cpp, Line 3341
Turn on Disc-At-Once, using DVD media

4:24:38 PM #5 Text 0 File DlgWaitCD.cpp, Line 288
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2067449 (459:25.74, 4037MB)

4:24:38 PM #6 Text 0 File DlgWaitCD.cpp, Line 300
Write in overburning mode: NO (enabled: CD)

4:24:38 PM #7 Text 0 File DlgWaitCD.cpp, Line 2699
Recorder: LITE-ON DVDRW SHW-160P6S, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193

4:24:38 PM #8 Text 0 File DlgWaitCD.cpp, Line 472
>>> Protocol of DlgWaitCD activities: <<<
=========================================

4:24:38 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2067450 (2067450) = #2067450/459:26.0
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2067450 blocks [E: LITE-ON DVDRW SHW-160P6S]
--------------------------------------------------------------

4:24:38 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: LITE-ON DVDRW SHW-160P6S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4234137600, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2067450 | lead-out | 1 | 0x41 | 0x00

4:24:38 PM #11 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

4:24:38 PM #12 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

4:24:38 PM #13 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started

4:24:38 PM #14 Text 0 File Burncd.cpp, Line 4175
Cache writing successful.

4:24:38 PM #15 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed

4:24:38 PM #16 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 16x (22,160 KB/s)

4:24:38 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

4:24:38 PM #18 Text 0 File DVDR.cpp, Line 2699
Recording mode: Sequential Recording Mode

4:24:38 PM #19 Text 0 File DVDR.cpp, Line 2855
Start write address at LBA 0
DVD high compatibility mode: Yes

4:24:38 PM #20 Text 0 File Cdrdrv.cpp, Line 8663
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

4:25:25 PM #21 Text 0 File Cdrdrv.cpp, Line 1210
16:25:25.109 - E: LITE-ON DVDRW SHW-160P6S : Queue again later

4:30:14 PM #22 Text 0 File WriterStatus.cpp, Line 116
<E: LITE-ON DVDRW SHW-160P6S> start writing Lead-Out at LBA 2067450 (1F8BFAh), length 0 blocks

4:30:14 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

4:30:14 PM #24 Text 0 File DVDR.cpp, Line 3095
EndDAO: Last written address was 2067439

4:30:26 PM #25 Phase 37 File dlgbrnst.cpp, Line 1730
Burn process completed successfully at 16x (22,160 KB/s)

4:30:26 PM #26 Phase 78 File dlgbrnst.cpp, Line 1730
Data verification started

4:35:14 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

4:35:14 PM #28 Phase 80 File dlgbrnst.cpp, Line 1730
Data verification completed successfully


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 1/25/2006 6:50:09 PM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)