1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Another Illegal Disk Error

Discussion in 'Nero discussion' started by Brunzwick, Feb 1, 2007.

  1. Brunzwick

    Brunzwick Member

    Joined:
    Feb 1, 2007
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    11
    I am receiving an Illegal Disk error in Nero on my NEC ND-4551A's. So far it has occured on TDK and Memorex media. On the TDK, I received the error, then tried again and it worked fine. I have verified that DMA is on and I just instaled Liggy and Dee's 1-X3 firmware. Here is the log:

    Windows XP 5.2
    IA32
    WinAspi: -

    NT-SPTI used
    Nero Version: 7.7.5.1
    Internal Version: 7, 7, 5, 1

    Recorder: <_NEC DVD_RW ND-4551A (1/2)>Version: 1-X3 - HA 2 TA 1 - 7.7.5.1
    Adapter driver: <IDE> HA 2
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    Recorder: <_NEC DVD_RW ND-4551A (3/2)>Version: 1-X3 - HA 2 TA 3 - 7.7.5.1
    Adapter driver: <IDE> HA 2
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    Recorder: <_NEC DVD_RW ND-4551A (5/1)>Version: 1-X3 - HA 1 TA 5 - 7.7.5.1
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    Recorder: <_NEC DVD_RW ND-4551A (7/1)>Version: 1-X3 - HA 1 TA 7 - 7.7.5.1
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <_NEC DVD_RW ND-4551A >Version: 1-X3 - HA 2 TA 1 - 7.7.5.1
    Adapter driver: <IDE> HA 2

    === Scsi-Device-Map ===
    CdRomPeripheral : _NEC DVD_RW ND-4551A atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : _NEC DVD_RW ND-4551A atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : _NEC DVD_RW ND-4551A atapi Port 3 ID 0 DMA: On
    CdRomPeripheral : _NEC DVD_RW ND-4551A atapi Port 3 ID 1 DMA: On
    DiskPeripheral : SATA Array iaStor Port 4 ID 0 DMA: On

    === CDRom-Device-Map ===
    _NEC DVD_RW ND-4551A E: CDRom9
    _NEC DVD_RW ND-4551A F: CDRom11
    _NEC DVD_RW ND-4551A G: CDRom5
    _NEC DVD_RW ND-4551A H: CDRom7
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    BUFE : 0
    Physical memory : 2047MB (2096564kB)
    Free physical memory: 1430MB (1464664kB)
    Memory in use : 30 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    1.2.2007
    Bootable ISO compilation
    9:15:53 PM #1 Text 0 File SCSIPTICommands.cpp, Line 411
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    9:15:53 PM #2 Text 0 File SCSIPTICommands.cpp, Line 411
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    9:15:53 PM #3 Text 0 File SCSIPTICommands.cpp, Line 411
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    9:15:53 PM #4 Text 0 File SCSIPTICommands.cpp, Line 411
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    9:15:54 PM #5 Text 0 File Isodoc.cpp, Line 6527
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : FALSE

    9:15:54 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3334
    First writeable address = 0 (0x00000000)

    9:15:54 PM #7 Text 0 File Burncd.cpp, Line 3465
    Turn on Disc-At-Once, using DVD media

    9:15:54 PM #8 Text 0 File Burncd.cpp, Line 3465
    Turn on Disc-At-Once, using DVD media

    9:15:54 PM #9 Text 0 File Burncd.cpp, Line 3465
    Turn on Disc-At-Once, using DVD media

    9:15:54 PM #10 Text 0 File Burncd.cpp, Line 3465
    Turn on Disc-At-Once, using DVD media

    9:15:54 PM #11 Text 0 File DlgWaitCD.cpp, Line 306
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1998399 (444:05.24, 3903MB)

    9:15:54 PM #12 Text 0 File DlgWaitCD.cpp, Line 318
    Write in overburning mode: NO (enabled: CD)

    9:15:54 PM #13 Text 0 File DlgWaitCD.cpp, Line 2912
    Recorder: _NEC DVD_RW ND-4551A (1/2), Media type: DVD-R
    Disc Manufacturer: CMC MA - G. AM3
    Disc Application Code: 64, Disc Physical Code: 193

    9:15:54 PM #14 Text 0 File DlgWaitCD.cpp, Line 490
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    9:15:54 PM #15 Text 0 File DlgWaitCD.cpp, Line 306
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1998399 (444:05.24, 3903MB)

    9:15:54 PM #16 Text 0 File DlgWaitCD.cpp, Line 318
    Write in overburning mode: NO (enabled: CD)

    9:15:54 PM #17 Text 0 File DlgWaitCD.cpp, Line 2912
    Recorder: _NEC DVD_RW ND-4551A (3/2), Media type: DVD-R
    Disc Manufacturer: CMC MA - G. AM3
    Disc Application Code: 64, Disc Physical Code: 193

    9:15:54 PM #18 Text 0 File DlgWaitCD.cpp, Line 490
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    9:15:54 PM #19 Text 0 File DlgWaitCD.cpp, Line 306
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1998399 (444:05.24, 3903MB)

    9:15:54 PM #20 Text 0 File DlgWaitCD.cpp, Line 318
    Write in overburning mode: NO (enabled: CD)

    9:15:54 PM #21 Text 0 File DlgWaitCD.cpp, Line 2912
    Recorder: _NEC DVD_RW ND-4551A (5/1), Media type: DVD-R
    Disc Manufacturer: CMC MA - G. AM3
    Disc Application Code: 64, Disc Physical Code: 193

    9:15:54 PM #22 Text 0 File DlgWaitCD.cpp, Line 490
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    9:15:54 PM #23 Text 0 File DlgWaitCD.cpp, Line 306
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1998399 (444:05.24, 3903MB)

    9:15:54 PM #24 Text 0 File DlgWaitCD.cpp, Line 318
    Write in overburning mode: NO (enabled: CD)

    9:15:54 PM #25 Text 0 File DlgWaitCD.cpp, Line 2912
    Recorder: _NEC DVD_RW ND-4551A (7/1), Media type: DVD-R
    Disc Manufacturer: CMC MA - G. AM3
    Disc Application Code: 64, Disc Physical Code: 193

    9:15:54 PM #26 Text 0 File DlgWaitCD.cpp, Line 490
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    9:15:54 PM #27 Text 0 File ThreadedTransferInterface.cpp, Line 823
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 1998400 (1998400) = #1998400/444:5.25
    relocatable, disc pos for caching/writing not required/ required
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1998400 blocks [E: _NEC DVD_RW ND-4551A]
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1998400 blocks [F: _NEC DVD_RW ND-4551A]
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1998400 blocks [G: _NEC DVD_RW ND-4551A]
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1998400 blocks [H: _NEC DVD_RW ND-4551A]
    --------------------------------------------------------------

    9:15:54 PM #28 Text 0 File ThreadedTransferInterface.cpp, Line 1026
    Prepare [E: _NEC DVD_RW ND-4551A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1: Idx 0 Idx 1 Next Trk
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4092723200, ISRC ""
    DAO layout:
    ===========
    ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 0 | 0x41 | 1998400 | 0 | 0x00
    0 | 1 | 1 | 0x41 | 1998400 | 0 | 0x00
    1998400 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

    9:15:54 PM #29 Text 0 File ThreadedTransferInterface.cpp, Line 1026
    Prepare [F: _NEC DVD_RW ND-4551A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1: Idx 0 Idx 1 Next Trk
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4092723200, ISRC ""
    DAO layout:
    ===========
    ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 0 | 0x41 | 1998400 | 0 | 0x00
    0 | 1 | 1 | 0x41 | 1998400 | 0 | 0x00
    1998400 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

    9:15:54 PM #30 Text 0 File ThreadedTransferInterface.cpp, Line 1026
    Prepare [G: _NEC DVD_RW ND-4551A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1: Idx 0 Idx 1 Next Trk
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4092723200, ISRC ""
    DAO layout:
    ===========
    ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 0 | 0x41 | 1998400 | 0 | 0x00
    0 | 1 | 1 | 0x41 | 1998400 | 0 | 0x00
    1998400 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

    9:15:54 PM #31 Text 0 File ThreadedTransferInterface.cpp, Line 1026
    Prepare [H: _NEC DVD_RW ND-4551A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1: Idx 0 Idx 1 Next Trk
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4092723200, ISRC ""
    DAO layout:
    ===========
    ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 0 | 0x41 | 1998400 | 0 | 0x00
    0 | 1 | 1 | 0x41 | 1998400 | 0 | 0x00
    1998400 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

    9:15:54 PM #32 Text 0 File SCSIPTICommands.cpp, Line 209
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    9:15:54 PM #33 Text 0 File SCSIPTICommands.cpp, Line 209
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    9:15:54 PM #34 Text 0 File SCSIPTICommands.cpp, Line 209
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    9:15:54 PM #35 Text 0 File SCSIPTICommands.cpp, Line 209
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    9:15:54 PM #36 Phase 24 File dlgbrnst.cpp, Line 1760
    Caching of files started

    9:15:54 PM #37 Text 0 File Burncd.cpp, Line 4298
    Cache writing successful.

    9:15:54 PM #38 Phase 25 File dlgbrnst.cpp, Line 1760
    Caching of files completed

    9:15:54 PM #39 Phase 36 File dlgbrnst.cpp, Line 1760
    Burn process started at 16x (22,160 KB/s)

    9:15:54 PM #40 Text 0 File ThreadedTransferInterface.cpp, Line 2764
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    9:15:54 PM #41 Text 0 File DVDR.cpp, Line 3070
    Recording mode: Sequential Recording Mode

    9:15:54 PM #42 Text 0 File DVDR.cpp, Line 3226
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    9:15:54 PM #43 Text 0 File Cdrdrv.cpp, Line 9288
    ---- DVD Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    9:15:55 PM #44 Text 0 File DVDR.cpp, Line 3070
    Recording mode: Sequential Recording Mode

    9:15:55 PM #45 Text 0 File DVDR.cpp, Line 3226
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    9:15:55 PM #46 Text 0 File Cdrdrv.cpp, Line 9288
    ---- DVD Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    9:15:55 PM #47 Text 0 File DVDR.cpp, Line 3070
    Recording mode: Sequential Recording Mode

    9:15:55 PM #48 Text 0 File DVDR.cpp, Line 3226
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    9:15:55 PM #49 Text 0 File Cdrdrv.cpp, Line 9288
    ---- DVD Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    9:15:55 PM #50 Text 0 File DVDR.cpp, Line 3070
    Recording mode: Sequential Recording Mode

    9:15:55 PM #51 Text 0 File DVDR.cpp, Line 3226
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    9:15:55 PM #52 Text 0 File Cdrdrv.cpp, Line 9288
    ---- DVD Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    9:15:56 PM #53 Text 0 File Cdrdrv.cpp, Line 1303
    21:15:56.196 - E: _NEC DVD_RW ND-4551A : Queue again later

    9:15:56 PM #54 Text 0 File Cdrdrv.cpp, Line 1303
    21:15:56.196 - G: _NEC DVD_RW ND-4551A : Queue again later

    9:15:56 PM #55 Text 0 File Cdrdrv.cpp, Line 1303
    21:15:56.196 - H: _NEC DVD_RW ND-4551A : Queue again later

    9:15:56 PM #56 Text 0 File Cdrdrv.cpp, Line 1303
    21:15:56.196 - F: _NEC DVD_RW ND-4551A : Queue again later

    9:29:10 PM #57 Text 0 File Cdrdrv.cpp, Line 1303
    21:29:10.823 - H: _NEC DVD_RW ND-4551A : Queue again later

    9:29:11 PM #58 Text 0 File WriterStatus.cpp, Line 113
    <G: _NEC DVD_RW ND-4551A> start writing Lead-Out at LBA 1998400 (1E7E40h), length 0 blocks

    9:29:16 PM #59 Text 0 File WriterStatus.cpp, Line 113
    <F: _NEC DVD_RW ND-4551A> start writing Lead-Out at LBA 1998400 (1E7E40h), length 0 blocks

    9:29:18 PM #60 Text 0 File WriterStatus.cpp, Line 113
    <E: _NEC DVD_RW ND-4551A> start writing Lead-Out at LBA 1998400 (1E7E40h), length 0 blocks

    9:29:37 PM #61 SPTI -1046 File SCSIPassThrough.cpp, Line 179
    CdRom7: SCSIStatus(x02) WinError(0) NeroError(-1046)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x2A 00 00 1E 7E 40 00 00 20 00 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05
    Buffer x26360c80: Len x10000
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

    9:29:37 PM #62 CDR -1046 File Writer.cpp, Line 301
    Illegal disc
    H: _NEC DVD_RW ND-4551A

    9:29:37 PM #63 Text 0 File WriterStatus.cpp, Line 113
    <H: _NEC DVD_RW ND-4551A> start writing Lead-Out at LBA 1998432 (1E7E60h), length 0 blocks

    9:29:37 PM #64 Text 0 File DVDR.cpp, Line 3446
    EndDAO: Last written address was 1998399

    9:29:46 PM #65 Text 0 File DVDR.cpp, Line 3446
    EndDAO: Last written address was 1998399

    9:29:46 PM #66 Text 0 File DVDR.cpp, Line 3446
    EndDAO: Last written address was 1998399

    9:29:46 PM #67 Text 0 File DVDR.cpp, Line 3446
    EndDAO: Last written address was 1998399

    9:29:46 PM #68 Phase 38 File dlgbrnst.cpp, Line 1760
    Burn process failed at 16x (22,160 KB/s)

    9:29:46 PM #69 Text 0 File SCSIPTICommands.cpp, Line 254
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    9:29:50 PM #70 Text 0 File Cdrdrv.cpp, Line 10529
    DriveLocker: UnLockVolume completed

    9:29:50 PM #71 Text 0 File SCSIPTICommands.cpp, Line 254
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    9:29:54 PM #72 Text 0 File Cdrdrv.cpp, Line 10529
    DriveLocker: UnLockVolume completed

    9:29:54 PM #73 Text 0 File SCSIPTICommands.cpp, Line 254
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    9:29:57 PM #74 Text 0 File Cdrdrv.cpp, Line 10529
    DriveLocker: UnLockVolume completed

    9:29:57 PM #75 Text 0 File SCSIPTICommands.cpp, Line 254
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    9:30:01 PM #76 Text 0 File Cdrdrv.cpp, Line 10529
    DriveLocker: UnLockVolume completed

    9:30:01 PM #77 Text 0 File SCSIPTICommands.cpp, Line 411
    UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    9:30:01 PM #78 Text 0 File SCSIPTICommands.cpp, Line 411
    UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    9:30:01 PM #79 Text 0 File SCSIPTICommands.cpp, Line 411
    UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    9:30:01 PM #80 Text 0 File SCSIPTICommands.cpp, Line 411
    UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


    Existing drivers:

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
  2. born2ride

    born2ride Regular member

    Joined:
    Sep 13, 2006
    Messages:
    1,069
    Likes Received:
    0
    Trophy Points:
    46
    Brunzwick
    i beleive this media bad
    might want to try verbatems or better quality ones
    Disc Manufacturer: CMC MA - G. AM3
    Burn process failed at 16x (22,160 KB/s)
    try to slow down your burn to 4 or 8x
     
    Last edited: Feb 1, 2007
  3. Brunzwick

    Brunzwick Member

    Joined:
    Feb 1, 2007
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    11
    Thanks for the reply.

    I'm trying some Sony16D1 disks right now. Hopefully I will see better results.
     
  4. Brunzwick

    Brunzwick Member

    Joined:
    Feb 1, 2007
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    11
    Still no luck. Sony, Memorex, TDK, Imation, and LG disks throw the same error. I have 4 burners and usually it's a different burner every time I get the error. It does not make any sense.


    Anybody have any ideas???
     
  5. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    18,496
    Likes Received:
    0
    Trophy Points:
    116
    Did you cut the burn speed down to 8x?

    How do the burners do just burning 1 at a time? Any problems when not using the multiple burner option.
     
  6. Brunzwick

    Brunzwick Member

    Joined:
    Feb 1, 2007
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    11
    I am testing using just 2 burners right now and it seems to be working. I will update further after I've run 20 or 30 disks through it.
     
  7. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    18,496
    Likes Received:
    0
    Trophy Points:
    116
    Ok - 4 may be pushing it on your setup.
    If 2 works - try 3 - that may be the magic number.
     

Share This Page