1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

burns only play on computer not dvd player

Discussion in 'Nero discussion' started by granbn, Feb 12, 2007.

  1. granbn

    granbn Member

    Joined:
    Jan 8, 2007
    Messages:
    38
    Likes Received:
    0
    Trophy Points:
    16
    i just got a new lite-on dvdrw lh-20a1h i used nero 6 on my old burner just fine to burn a copied dvd, and my problem is now when i burn a dvd my dvd player don't reconixze it but my computer will play it. so i got nero 7 with the same efects. i tried burning at 4x with no luck. i have noticed that when i burn that while burning the upper buffer is at 100 but the buffer at the bottom does not come on were as before both of them were at 100? i have updated my firmware.
    by the way the million is in monopoly money,
     
  2. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    18,496
    Likes Received:
    0
    Trophy Points:
    116
    Hi granbn
    Just the 1 buffer showing when writing is okay - from you're description sounds like that one is for the burner.
    If you not burning on the fly the drive that reading buffer will fill up then go down once the burn starts - then that buffer kicks in for that drive.

    Your problem sounds like a media compatibility w/ the player.
    What media are you using? Like Sony +R 16x?
    Does your player support both formats (- or + most newer ones do).
     
  3. granbn

    granbn Member

    Joined:
    Jan 8, 2007
    Messages:
    38
    Likes Received:
    0
    Trophy Points:
    16
    yes my burner supports both but i am using dvd-r
     
  4. granbn

    granbn Member

    Joined:
    Jan 8, 2007
    Messages:
    38
    Likes Received:
    0
    Trophy Points:
    16
    sorry yes it is a sony dvd-r
     
  5. PacMan777

    PacMan777 Regular member

    Joined:
    Jun 11, 2013
    Messages:
    3,836
    Likes Received:
    0
    Trophy Points:
    46
    Record the video output to the hard drive, do a simulated burn and post the log here. If the sim comes out okay, it's probably media incompatibility as Binkie mentioned. One thing you can do to increase compatibility is use DVD +R and booktype to DVD ROM if your drive allows the option.
     
  6. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    18,496
    Likes Received:
    0
    Trophy Points:
    116
    Ok you can try the burn to the hard drive as pacman suggested.

    We can also check the firmware on the burner - if it's not up to date may help.

    Go to Nero SmartStart>Tools>InfoTool.
    The burner make & model will be listed in the dropdown - post back that.
    In the drive tab there's a field for the firmware version post that back too.

    Or you can just post the last Nero too like pacman suggested - all info will be listed there too.
    You can find it here:
    program files>nero>nero 7>core>nerohistory.
    It's a text file and the logs are separated by something like this:
    =======***Nero Burning History***========

    Just be sure to edit out the serial # - begins w/ 1A, 1C or 5C.

     
  7. granbn

    granbn Member

    Joined:
    Jan 8, 2007
    Messages:
    38
    Likes Received:
    0
    Trophy Points:
    16
    [3:1]d\lite-on dvdrw lh-20a1h

    ok i went to nero>nero7>core>nerohistory in the core there is no history there is alot of folders but none say history
     
  8. blake123

    blake123 Guest

    try +rs and booktype them may work
     
  9. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    18,496
    Likes Received:
    0
    Trophy Points:
    116
    dunh on me - you listed the burner in your 1st post - sorry :(
    Here's a firmware update for it - LL06.

    You'll be looking for a text file in the core folder called nerohistory.
     
  10. granbn

    granbn Member

    Joined:
    Jan 8, 2007
    Messages:
    38
    Likes Received:
    0
    Trophy Points:
    16
    ok here it is sorry for the trouble


    granville freeman



    Windows XP 5.1
    IA32
    WinAspi: -

    NT-SPTI used
    Nero Version: 7.7.5.1
    Internal Version: 7, 7, 5, 1
    (Nero Express)
    Recorder: <LITE-ON DVDRW LH-20A1H> Version: LL06 - HA 1 TA 0 - 7.7.5.1
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
    Connected to MMC as unknown drive with class-nr : 1
    Drive is autodetected - recorder class: Std. MMC recorder
    CD-ROM: <LITE-ON DVDRW LH-20A1H >Version: LL06 - HA 1 TA 0 - 7.7.5.1
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD800BB-53DKA0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : LITE-ON DVDRW LH-20A1H atapi Port 3 ID 1 DMA: On

    === CDRom-Device-Map ===
    LITE-ON DVDRW LH-20A1H D: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    BUFE : 0
    Physical memory : 1518MB (1555180kB)
    Free physical memory: 1059MB (1085348kB)
    Memory in use : 30 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    12.2.2007
    ===== Disc-Copy over image - 1st step : Copy to image ...

    10:48:24 PM #1 Text 0 File SCSIPTICommands.cpp, Line 411
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    10:48:24 PM #2 Text 0 File SCSIPTICommands.cpp, Line 209
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    10:48:24 PM #3 Text 0 File DVDCopy.cpp, Line 319
    DVD Track-Information from source disc:
    Media Type: DVD-R
    S01 T01 Con 0x14 Start 0 Len 1264 NWA -1 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
    S01 T02 Con 0x14 Start 1280 Len 47856 NWA -1 (gap 16) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
    S01 T03 Con 0x14 Start 49152 Len 1934784 NWA -1 (gap 16) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
    S01 T04 Con 0x14 Start 1983952 Len 304 NWA -1 (gap 16) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)

    10:48:24 PM #4 Text 0 File DVDCopy.cpp, Line 434
    Max -1 tracks of 4 allowed to copy
    1: 0 - 1264 = 1264, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
    2: 1280 - 49136 = 47856, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
    3: 49152 - 1983936 = 1934784, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
    4: 1983952 - 1984256 = 304, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

    10:48:24 PM #5 Text 0 File Burncd.cpp, Line 3465
    Turn on Track-At-Once, using DVD-R/RW media

    10:48:24 PM #6 Text 0 File DlgWaitCD.cpp, Line 306
    Last possible write address on media: 2621439 (582:32.39, 5119MB)
    Last address to be written: 1984255 (440:56.55, 3875MB)

    10:48:24 PM #7 Text 0 File DlgWaitCD.cpp, Line 318
    Write in overburning mode: NO (enabled: CD)

    10:48:24 PM #8 Text 0 File DlgWaitCD.cpp, Line 490
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    10:48:24 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 823
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (1 - Data (mode 1))
    2 indices, index0 (150) not provided
    original disc pos #0 + 1280 (1280) = #1280/0:17.5
    not relocatable, disc pos for caching/writing not required/not required
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1280 blocks [Image Recorder]
    1: TRM_DATA_MODE1 (2 - Data (mode 1))
    2 indices, index0 (0) not provided
    original disc pos #1280 + 47872 (47872) = #49152/10:55.27
    not relocatable, disc pos for caching/writing not required/not required
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 47872 blocks [Image Recorder]
    2: TRM_DATA_MODE1 (3 - Data (mode 1))
    2 indices, index0 (0) not provided
    original disc pos #49152 + 1934800 (1934800) = #1983952/440:52.52
    not relocatable, disc pos for caching/writing not required/not required
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1934800 blocks [Image Recorder]
    3: TRM_DATA_MODE1 (4 - Data (mode 1))
    2 indices, index0 (0) not provided
    original disc pos #1983952 + 304 (304) = #1984256/440:56.56
    not relocatable, disc pos for caching/writing not required/not required
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 304 blocks [Image Recorder]
    --------------------------------------------------------------

    10:48:24 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1026
    Prepare [Image Recorder] for write in TAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x40; Session Closed, disc fixated
    Tracks 1 to 4: Idx 0 Idx 1 Next Trk
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2621440, ISRC ""
    2: TRM_DATA_MODE1, 2048/0x00, FilePos 2621440 2621440 100663296, ISRC ""
    3: TRM_DATA_MODE1, 2048/0x00, FilePos 100663296 100663296 4063133696, ISRC ""
    4: TRM_DATA_MODE1, 2048/0x00, FilePos 4063133696 4063133696 4063756288, ISRC ""
    DAO layout:
    ===========
    ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 0 | 0x41 | 1280 | 1280 | 0x00
    0 | 1 | 1 | 0x41 | 1280 | 1280 | 0x00
    1280 | 2 | 0 | 0x41 | 47872 | 49152 | 0x00
    1280 | 2 | 1 | 0x41 | 47872 | 49152 | 0x00
    49152 | 3 | 0 | 0x41 | 1934800 | 1983952 | 0x00
    49152 | 3 | 1 | 0x41 | 1934800 | 1983952 | 0x00
    1983952 | 4 | 0 | 0x41 | 304 | 1984256 | 0x00
    1983952 | 4 | 1 | 0x41 | 304 | 1984256 | 0x00
    1984256 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

    10:48:24 PM #11 Phase 120 File dlgbrnst.cpp, Line 1760
    Creating the image for burning

    10:48:24 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2764
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    10:48:25 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2764
    Verifying disc position of item 1 (not relocatable, no disc pos, no patch infos, orig at #1280): write at #1280

    10:48:41 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2764
    Verifying disc position of item 2 (not relocatable, no disc pos, no patch infos, orig at #49152): write at #49152

    10:53:20 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2764
    Verifying disc position of item 3 (not relocatable, no disc pos, no patch infos, orig at #1983952): write at #1983952

    10:53:20 PM #16 Phase 121 File dlgbrnst.cpp, Line 1760
    Creating Image completed successfully

    10:53:21 PM #17 Text 0 File SCSIPTICommands.cpp, Line 254
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    10:53:27 PM #18 Text 0 File SCSIPTICommands.cpp, Line 411
    UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    10:53:27 PM #19 Text 0 File Cdrdrv.cpp, Line 10529
    DriveLocker: UnLockVolume completed



    ===== Disc-Copy over image - 2nd step : Burn the image ...

    10:53:28 PM #1 Text 0 File SCSIPTICommands.cpp, Line 411
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    10:53:29 PM #2 IMAGEGEN -10 File ImageGen.cpp, Line 366
    Image was written as TAO.
    MTYP: Mediumtype = DVD-R/RW (0x6)
    Image file name: <C:\Documents and Settings\granbn\My Documents\TempImage.nrg>

    10:53:29 PM #3 Text 0 File Burncd.cpp, Line 3465
    Turn on Track-At-Once, using DVD-R/RW media

    10:53:52 PM #4 Text 0 File DlgWaitCD.cpp, Line 306
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1984255 (440:56.55, 3875MB)

    10:53:52 PM #5 Text 0 File DlgWaitCD.cpp, Line 318
    Write in overburning mode: NO (enabled: CD)

    10:53:52 PM #6 Text 0 File DlgWaitCD.cpp, Line 2912
    Recorder: LITE-ON DVDRW LH-20A1H, Media type: DVD-R
    Disc Manufacturer: SONY16 - D1
    Disc Application Code: 64, Disc Physical Code: 193

    10:53:52 PM #7 Text 0 File DlgWaitCD.cpp, Line 490
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert empty disc to write to.
    (Medium in drive: Unknown. Medium required by compilation: DVD-R/RW.)

    10:53:52 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 823
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (1 - DVD-ROM)
    2 indices, index0 (150) not provided
    original disc pos #0 + 1280 (1280) = #1280/0:17.5
    not relocatable, disc pos for caching/writing not required/not required
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1264 blocks [D: LITE-ON DVDRW LH-20A1H]
    1: TRM_DATA_MODE1 (2 - DVD-ROM)
    2 indices, index0 (0) not provided
    original disc pos #1280 + 47872 (47872) = #49152/10:55.27
    not relocatable, disc pos for caching/writing not required/not required
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 47856 blocks [D: LITE-ON DVDRW LH-20A1H]
    2: TRM_DATA_MODE1 (3 - DVD-ROM)
    2 indices, index0 (0) not provided
    original disc pos #49152 + 1934800 (1934800) = #1983952/440:52.52
    not relocatable, disc pos for caching/writing not required/not required
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1934784 blocks [D: LITE-ON DVDRW LH-20A1H]
    3: TRM_DATA_MODE1 (4 - DVD-ROM)
    2 indices, index0 (0) not provided
    original disc pos #1983952 + 304 (304) = #1984256/440:56.56
    not relocatable, disc pos for caching/writing not required/not required
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 304 blocks [D: LITE-ON DVDRW LH-20A1H]
    --------------------------------------------------------------

    10:53:52 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1026
    Prepare [D: LITE-ON DVDRW LH-20A1H] for write in TAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x40; Session Closed, disc fixated
    Tracks 1 to 4: Idx 0 Idx 1 Next Trk
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2621440, ISRC ""
    2: TRM_DATA_MODE1, 2048/0x00, FilePos 2621440 2621440 100663296, ISRC ""
    3: TRM_DATA_MODE1, 2048/0x00, FilePos 100663296 100663296 4063133696, ISRC ""
    4: TRM_DATA_MODE1, 2048/0x00, FilePos 4063133696 4063133696 4063756288, ISRC ""
    DAO layout:
    ===========
    ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 0 | 0x41 | 1280 | 1280 | 0x00
    0 | 1 | 1 | 0x41 | 1280 | 1280 | 0x00
    1280 | 2 | 0 | 0x41 | 47872 | 49152 | 0x00
    1280 | 2 | 1 | 0x41 | 47872 | 49152 | 0x00
    49152 | 3 | 0 | 0x41 | 1934800 | 1983952 | 0x00
    49152 | 3 | 1 | 0x41 | 1934800 | 1983952 | 0x00
    1983952 | 4 | 0 | 0x41 | 304 | 1984256 | 0x00
    1983952 | 4 | 1 | 0x41 | 304 | 1984256 | 0x00
    1984256 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

    10:53:52 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1097
    Removed 16 run-out blocks from end of track 1. Length: 1280 -> 1264.

    10:53:52 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1097
    Removed 16 run-out blocks from end of track 2. Length: 47872 -> 47856.

    10:53:52 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1097
    Removed 16 run-out blocks from end of track 3. Length: 1934800 -> 1934784.

    10:53:52 PM #13 Text 0 File SCSIPTICommands.cpp, Line 209
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    10:53:52 PM #14 Phase 36 File dlgbrnst.cpp, Line 1760
    Burn process started at 8x (11,080 KB/s)

    10:53:52 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2764
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    10:53:52 PM #16 Text 0 File DVDR.cpp, Line 3070
    Recording mode: Sequential Recording Mode for Multisession

    10:53:52 PM #17 Text 0 File DVDR.cpp, Line 3226
    Start write address at LBA 0
    DVD high compatibility mode: No

    10:53:52 PM #18 Text 0 File Cdrdrv.cpp, Line 9288
    ---- DVD Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    10:54:27 PM #19 Text 0 File DVDMinusRW.cpp, Line 611
    EndTrack 1: Last written address was 1263

    10:54:27 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2764
    Verifying disc position of item 1 (not relocatable, no disc pos, no patch infos, orig at #1280): write at #1280

    10:54:27 PM #21 Text 0 File DVDR.cpp, Line 3070
    Recording mode: Sequential Recording Mode for Multisession

    10:54:27 PM #22 Text 0 File DVDR.cpp, Line 3226
    Start write address at LBA 1280
    DVD high compatibility mode: No

    10:54:27 PM #23 Text 0 File Cdrdrv.cpp, Line 9288
    ---- DVD Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    10:54:46 PM #24 Text 0 File DVDMinusRW.cpp, Line 611
    EndTrack 2: Last written address was 49135

    10:54:46 PM #25 Text 0 File ThreadedTransferInterface.cpp, Line 2764
    Verifying disc position of item 2 (not relocatable, no disc pos, no patch infos, orig at #49152): write at #49152

    10:54:46 PM #26 Text 0 File DVDR.cpp, Line 3070
    Recording mode: Sequential Recording Mode for Multisession

    10:54:46 PM #27 Text 0 File DVDR.cpp, Line 3226
    Start write address at LBA 49152
    DVD high compatibility mode: No

    10:54:46 PM #28 Text 0 File Cdrdrv.cpp, Line 9288
    ---- DVD Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    11:01:02 PM #29 Text 0 File DVDMinusRW.cpp, Line 611
    EndTrack 3: Last written address was 1983935

    11:01:02 PM #30 Text 0 File ThreadedTransferInterface.cpp, Line 2764
    Verifying disc position of item 3 (not relocatable, no disc pos, no patch infos, orig at #1983952): write at #1983952

    11:01:02 PM #31 Text 0 File DVDR.cpp, Line 3070
    Recording mode: Sequential Recording Mode for Multisession

    11:01:02 PM #32 Text 0 File DVDR.cpp, Line 3226
    Start write address at LBA 1983952
    DVD high compatibility mode: No

    11:01:02 PM #33 Text 0 File Cdrdrv.cpp, Line 9288
    ---- DVD Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    11:01:09 PM #34 Text 0 File DVDMinusRW.cpp, Line 611
    EndTrack 4: Last written address was 1984255

    11:01:40 PM #35 Phase 37 File dlgbrnst.cpp, Line 1760
    Burn process completed successfully at 8x (11,080 KB/s)

    11:01:41 PM #36 Text 0 File SCSIPTICommands.cpp, Line 254
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    11:01:46 PM #37 Text 0 File Cdrdrv.cpp, Line 10529
    DriveLocker: UnLockVolume completed

    11:01:46 PM #38 Text 0 File SCSIPTICommands.cpp, Line 411
    UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


    Existing drivers:

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


     
  11. PacMan777

    PacMan777 Regular member

    Joined:
    Jun 11, 2013
    Messages:
    3,836
    Likes Received:
    0
    Trophy Points:
    46
    In your burn settings do you have the option to Finalize the disc selected. To play in a standalone player the DVD has to be Finalized.
     
  12. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    18,496
    Likes Received:
    0
    Trophy Points:
    116
    It's no trouble granbn

    Like PacMan said you'll need to finalize the disc - some dvd players will have a problem w/ ones not.
    So uncheck multisession.

    What is this disc your copying of? Looks like it has tracks on it instead of the usually dvd video stuff.
     
  13. granbn

    granbn Member

    Joined:
    Jan 8, 2007
    Messages:
    38
    Likes Received:
    0
    Trophy Points:
    16
    thanx very much for the help you folks are awsome
     
  14. PacMan777

    PacMan777 Regular member

    Joined:
    Jun 11, 2013
    Messages:
    3,836
    Likes Received:
    0
    Trophy Points:
    46
    You're welcome. Speaking for Binkie and the rest of us, "Glad to be of assistance".
     
  15. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    18,496
    Likes Received:
    0
    Trophy Points:
    116
    I'll 2nd what PacMan said :)

    Happy Burning granbn
     

Share This Page