Hi, ok im quite new to this and have read as much of your stickys as possible. Ok the problems I am having are, when I burn a DVD using nero 7 premium the disk burns Ok but when I play it in my DVD player (standalone) the picture and sound is great but it just freezes. Ive tried burning from the GUI and letting nero convert AVI file and burn straight to DVD, ive also tried burning to HD and then burning to disk but this doesnt seem to help. On some occasions I get pixelation, so ive tried burning at 1kbs so the pixels go away but I still get freezing. Any more info you need please ask, and thanks in advance for any help. Liam
What brand of media are you using? DL this program dvdIdentifier and see who manufacturers your blank media, then post that info Also a good rule for burning speeds is half of what the top rated speed of the disks are. lastly, is your firmware up to date?
Hi 300bowler, My media is RITEKG05, As stated I had tried burning at the lowest speed possible but even this did not make a diffrence. About the firmware please dont ask about this because I have been searching google for hours on this subject and still have no answer. My pc is a HP pavillion media centre model :m7580.uk, from what I can make out it has a LG GSA-H20l DVD+/- r/rw installed. The current firmware is S742, searchin google it appears that as mines is not branded with "LG" the firmwares are diffrent. If you have any suggestion I would be very grateful. Liam
have you tried using a lens cleaner for you dvd player? or does commercial dvds play fine? air spraycans can help too. Also can you post a burn log from nero find it here Program Files\Nero\Nero 7\Core look for the nerohistory.txt file, just post the last log as there should be many, and dont forget to edit your serial number out also have you tried any other media beside the G05's? your burner just might not like the Riteks you are using
Commercial DVD work fine, also some (very little) of the DVD I have made work fine aswell. What I tend to find is when im watching the movie and it just freezes if I press pause or stop and then just press play again it carries on as normal. I have not tried cleaning the lens. I have tried diffrent madia, I was using Gigatain DVD+R, so bought the RITEKG05 so see if that would resolve the issue but it does not. I made a DVD last night, converted AVI file with Winavi(latest version) and burned with Nero burning rom (classic version as per your guide) again superb quality but frooze twice, once I pressed stop and then play it was perfect apart from they two times. I never save my Nero log but will burn a DVD shortly as I am downloading just now and post on here. I appreciate your time. Liam
Nero logs are automatically saved to this location Nero 6 history log location: Program Files>Ahead>Nero>NeroHistory.txt Nero 7 history log location: Program Files>Nero>Nero 7>Core>NeroHistory
Hi gwendolin, Ok I searched my pc and it did find results thank you, dont know why I couldnt find it. Ok now the log is very, very long so I have only copied my last section, hope this is ok: Im not sure why the very top line says WINDOWS XP 6.0 because I have Vista home premium installed? Liam ****-****-****-****-****-****-**** Windows XP 6.0 IA32 WinAspi: - NT-SPTI used Nero Version: 7.9.6.0 Internal Version: 7, 9, 6, 0 Recorder: <HL-DT-ST DVDRRW GSA-H20L>Version: S742 - HA 1 TA 0 - 7.9.6.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <IDE-DVD DROM6216 >Version: HD08 - HA 1 TA 1 - 7.9.6.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD2000JS-60NCB1 iaStor Port 0 ID 0 DMA: On DiskPeripheral : WDC WD2000JS-60NCB1 iaStor Port 0 ID 1 DMA: Off === CDRom-Device-Map === HL-DT-ST DVDRRW GSA-H20L F: CdRom0 IDE-DVD DROM6216 G: CdRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 2045MB (2094972kB) Free physical memory: 1296MB (1327124kB) Memory in use : 36 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 2.6.2007 UDF/ISO compilation 21:58:29 #1 Text 0 File SCSIPTICommands.cpp, Line 424 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 21:58:29 #2 Phase 112 File dlgbrnst.cpp, Line 1762 DVD-Video files reallocation started 21:58:29 #3 Text 0 File DVDVideoCompilation.cpp, Line 616 Content of VIDEO_TS.IFO has been modified 21:58:29 #4 Text 0 File DVDVideoCompilation.cpp, Line 616 Content of VIDEO_TS.BUP has been modified 21:58:29 #5 Phase 113 File dlgbrnst.cpp, Line 1762 DVD-Video files reallocation completed 21:58:29 #6 Text 0 File Isodoc.cpp, Line 6663 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Options : automatic UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 21:58:29 #7 Phase 111 File dlgbrnst.cpp, Line 1762 DVD-Video files sorted 21:58:29 #8 ISO9660GEN -11 File Geniso.cpp, Line 3343 First writeable address = 0 (0x00000000) 21:58:29 #9 ISO9660GEN -11 File Geniso.cpp, Line 3343 First writeable address = 0 (0x00000000) 21:58:29 #10 Text 0 File Burncd.cpp, Line 3508 Turn on Disc-At-Once, using DVD media 21:58:30 #11 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2247055 (499:20.55, 4388MB) 21:58:30 #12 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 21:58:30 #13 Text 0 File DlgWaitCD.cpp, Line 2964 Recorder: HL-DT-ST DVDRRW GSA-H20L, Media type: DVD-R Disc Manufacturer: RITEKG - 05 Disc Application Code: 64, Disc Physical Code: 193 21:58:30 #14 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 21:58:30 #15 Text 0 File ThreadedTransferInterface.cpp, Line 793 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2247056 (2247056) = #2247056/499:20.56 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2247056 blocks [F: HL-DT-ST DVDRRW GSA-H20L] -------------------------------------------------------------- 21:58:30 #16 Text 0 File ThreadedTransferInterface.cpp, Line 995 Prepare [F: HL-DT-ST DVDRRW GSA-H20L] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4601970688, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 2247056 | 0 | 0x00 2247056 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 21:58:30 #17 Text 0 File SCSIPTICommands.cpp, Line 215 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 21:58:30 #18 Text 0 File Burncd.cpp, Line 4294 Caching options: cache CDRom or Network-Yes, small files-No (<64KB) 21:58:30 #19 Phase 24 File dlgbrnst.cpp, Line 1762 Caching of files started 21:58:30 #20 Text 0 File Burncd.cpp, Line 4413 Cache writing successful. 21:58:30 #21 Phase 25 File dlgbrnst.cpp, Line 1762 Caching of files completed 21:58:30 #22 Phase 36 File dlgbrnst.cpp, Line 1762 Burn process started at 4x (5,540 KB/s) 21:58:30 #23 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 21:58:30 #24 Text 0 File DVDR.cpp, Line 3225 Recording mode: Sequential Recording Mode 21:58:30 #25 Text 0 File DVDR.cpp, Line 3381 Start write address at LBA 0 DVD high compatibility mode: Yes 21:58:30 #26 SPTI -1066 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00 Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24 Buffer x0b8a4080: Len x648 21:58:30 #27 Text 0 File Cdrdrv.cpp, Line 9872 ---- Disc Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Revision number of maximum recording speed: 3.0 Revision number of minimum recording speed: 0.0 Revision number table of recording speed: 0.1 0.2 0.3 - - - 0.4 Class: 0 Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0.............. 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 21:58:30 #28 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 83836800 22:12:39 #29 Text 0 File WriterStatus.cpp, Line 113 <F: HL-DT-ST DVDRRW GSA-H20L> start writing Lead-Out at LBA 2247056 (224990h), length 0 blocks 22:13:09 #30 Text 0 File DVDR.cpp, Line 3783 EndDAO: Last written address was 2247055 (22498Fh) 22:13:09 #31 Phase 37 File dlgbrnst.cpp, Line 1762 Burn process completed successfully at 4x (5,540 KB/s) 22:13:09 #32 Phase 78 File dlgbrnst.cpp, Line 1762 Data verification started 22:13:12 #33 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 590400 22:22:47 #34 Phase 80 File dlgbrnst.cpp, Line 1762 Data verification completed successfully 22:22:48 #35 Text 0 File SCSIPTICommands.cpp, Line 261 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 22:22:55 #36 Text 0 File Cdrdrv.cpp, Line 11185 DriveLocker: UnLockVolume completed 22:22:55 #37 Text 0 File SCSIPTICommands.cpp, Line 424 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon ====== *** Nero Burning ROM, History File *** ======
does this only happen when converting files? or does it happen when you try and backup up commercial dvds? one thing you can try that wont hurt is after you convert the AVI file run the Folder thru FixVTS, so it gets all the files nice and happy, for the burn. other then that i would try different media like Verbatims or Taiyo Yudens
I don't beleive G05's are even being made anymore. Production stopped years ago. They were good media in the early days, but at the end crap. Try some Verbatims as was mentioned.
I have never tried backing up a commercial DVD, all I am looking to do is download a film from Azureus, 95% of the time in .AVI format and then get that movie onto a DVD. If im being honest I never imagined it would be so complex. I will be looking into your FixVTS suggestion. For what I am trying to achieve would you recommend any particular converting/burning software, from personal experience? With regards to the media, I just walked into the pc shop and the guy recommended these DVD-r to me, obviously seen me coming lol Again cheers. Liam
ConvertXtoDVD is one of the favorites around here, i use Nero Vision and ConvertXtoDVD, I sure hope they were verbatims, IMO Most of those people that work at those shops dont know what they are talking about when it comes to blank media.