well, telling people what tips you want would help. telling me you have an SATA card doesn't really tell me what you want to do with it.
ok i want to mod my own xbox ive read many guides im just trying to work out were i should start and are there anything else i need apart from PC Xbox 360 Sata card and cable and ive been told i need crocodile clips ( can any 1 confirm this) and what else do i need?
you need to buy a kit for flashing it like these http://www.extreme-mods.com/xeno-360-connectivity-kit-p.html http://www.extreme-mods.com/xecuter-360-connectivity-kit-p.html and get the correct flash for the DVD drive you have in the 360 of course. Here is a flashing tutorial and other good stuff. http://www.xtreme-source.com/tutorials-xbox-360/4039-xbox-360-quick-links.html http://www.xtreme-source.com/tutorials-xbox-360/3747-flashing-xbox-360-hitachi-drives-non-v78.html http://www.xtreme-source.com/tutorials-xbox-360/3746-flash-hitachi-v0078-xbox-360-dvd-drive.html
Can i ask whats the need for the flashing kits ? so far i have got SATA Via 6421 Card (Xbox is Samsung) Torx T10 Screwdriver hex edited mtk flash (no idea what this is but im told its a must) sata Cable and ive got all the tools needed to open the xbox Also ive got the correct flash for Samsung is that it ? thanks
sorry about double post but also how do i make a backup of my current firmware case things go wrong ?
you listed that you had and Xbox 360? To flash the drive you need a kit to flash it with. If you have a regular Xbox 1 then modding it is a whole different method. So which is it?
Ok its xbox 360 So far i have got the following Xbox 360 (samsung drive) Torx T10 Screwdriver Crocodile Clsips Sata card with via 6421 chipset sata lead ive been told this is all i need is this correct ? thanks
not sure. there may be a cheap way to do it. But evryone i know who does these (and they do a lot of them) buys one of the kits i listed. Those were made just for flashing the drives of a 360 so why not get one.
