1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

sonydrx-830 not opening or reading

Discussion in 'DVDR' started by bobbiejoc, Jun 8, 2007.

  1. bobbiejoc

    bobbiejoc Guest

    my computer (a dell) would recognize the drive but I wasn't able to do anything with the drive. If a CD or DVD was in the drive the computer would tell me that there was nothing in the drive. The button on the drive wouldn't work to open the door to the drive and the there was no way I could open the drive except by putting a paper clip in the little hole just below the tray that come out to open the drive so I could get the disk back.
    Does anybody out there know anything about this problem?

    i use DVD Shrink I put a DVD movie in the DVD drive. I then clicked on open disk on DVD Shrink. After that a meesage popped up saying that the region needs to be set. It gave me the only choice of region 1 ( the USA). All the other regions were grayed out. After I clicked on "okay" DVD Shrink said it could not read the disc. So then I went to go eject the disc, by pressing the eject button on the side of the DVD drive, but it would not eject the disk. I noticed that the green light on the drive was on and staying lite. In the owner's manual this means that the drive it busy.
    Since this is a replacement burner from sony, I am not sure if I can return it. The first one stopped working it was not being read by my computer
    I have already tried turning off the drive and disconnecting the USB. Also, unplugging the power cord and the USB from the drive for ten secondsand then reconnecting. I do not keep it connected to my computer when I am not using it per instructions from sony. I noticed that some one else had this problem a while back but I am not aware if the advise given helped them. It did not solve my issue
    Thank you
     
  2. 56delray

    56delray Regular member

    Joined:
    Feb 8, 2007
    Messages:
    659
    Likes Received:
    0
    Trophy Points:
    26
    DriveCheck Diagnostic
    Please note the following:

    The test may take up to 20 minutes to run.
    Run this utility ONLY if directed by technical support to do so.
    Ensure you have the latest firmware upgrade on the drive.
    When running the test on a DVD-RW drive,
    please ensure you are using media that is on the media compatibility list.

    Sony DriveCheck Diagnostic Tool

    There is a firmware Upgrade Version SS25.
    It is for reliability improvements with 8cm DVD-R DL and compatibility with Windows Vista.

    Sounds like the same problem. I would go back to Sony.
     
  3. bobbiejoc

    bobbiejoc Guest

    I was contacted by sony and they had me do the updating the drive now opens but will still not let me burn a disk it tells me that I have the wrong type of disk in
     
  4. 56delray

    56delray Regular member

    Joined:
    Feb 8, 2007
    Messages:
    659
    Likes Received:
    0
    Trophy Points:
    26
    Did they have you run the DriveCheck Diagnostic Tool?
    What type and brand disc are you using?
    What software are you tring to burn with?
    Post a burn log if you have one. Edit out serial number for Nero.
     
  5. bobbiejoc

    bobbiejoc Guest

    I had been using the dvd-r since I got the drive in March. I couldn't run the test. the door opens and ask me to put in a disk even when there is one in there. Contacted sony and was told to try dvd+r so I did and still get the same error message.
    I am using nerosmart. I am not sure how to get to my burn log but if I can I will post it. I have to call sony again in the morning
    Thank you
     
  6. bobbiejoc

    bobbiejoc Guest

    couldn't find a burn log.
     
  7. 56delray

    56delray Regular member

    Joined:
    Feb 8, 2007
    Messages:
    659
    Likes Received:
    0
    Trophy Points:
    26
    c:\program files\ahead\nero\nerohistory.log
     
  8. bobbiejoc

    bobbiejoc Guest


    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 8:35:32 AM
    Nero Version: 6.6.0.12
    Internal Version: 6, 6, 0, 12d

    Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.6.0.12
    Adapter driver: <Virtual Device> HA -1
    Drive buffer :
    CD-ROM: <HL-DT-ST RW/DVD GCC-4480B>Version: C104 - HA 1 TA 0 - 6.6.0.12
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : IC35L090AVV207-0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST RW/DVD GCC-4480B atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST RW/DVD GCC-4480B D: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 509MB (522220kB)
    Free physical memory: 124MB (127668kB)
    Memory in use : 75 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    22.2.2007
    Copy disc to image
    11:32:11 AM #1 Text 0 File DlgWaitCD.cpp, Line 272
    Write in overburning mode: NO (enabled: CD)

    11:32:11 AM #2 Text 0 File DlgWaitCD.cpp, Line 438
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Disc blank or invalid. Need valid original disc.
    (Medium in drive: Unknown. Medium required by compilation: CD.)

    11:32:11 AM #3 Phase 23 File dlgbrnst.cpp, Line 1832
    Reading disc aborted


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 12:07:32 PM
    File 'WNASPINT.DLL': Ver=V1.20, size=57344 bytes, created 2/4/2003 7:24:08 AM
    File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 4/22/2005 9:47:25 AM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 9:59:44 PM (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    Bobbie Jo

    1A22-0206-0530-1610-5715-1441*

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 8:35:32 AM
    Nero Version: 6.6.0.12
    Internal Version: 6, 6, 0, 12d

    Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.6.0.12
    Adapter driver: <Virtual Device> HA -1
    Drive buffer :
    CD-ROM: <HL-DT-ST RW/DVD GCC-4480B>Version: C104 - HA 1 TA 0 - 6.6.0.12
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : IC35L090AVV207-0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST RW/DVD GCC-4480B atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST RW/DVD GCC-4480B D: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 509MB (522220kB)
    Free physical memory: 155MB (159028kB)
    Memory in use : 69 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    22.2.2007
    CD Copy
    11:33:21 AM #1 Text 0 File DlgWaitCD.cpp, Line 272
    Write in overburning mode: NO (enabled: CD)

    11:33:21 AM #2 Text 0 File DlgWaitCD.cpp, Line 438
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Disc blank or invalid. Need valid original disc.
    (Medium in drive: Unknown. Medium required by compilation: CD.)

    11:33:21 AM #3 Phase 23 File dlgbrnst.cpp, Line 1832
    Reading disc aborted


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 12:07:32 PM
    File 'WNASPINT.DLL': Ver=V1.20, size=57344 bytes, created 2/4/2003 7:24:08 AM
    File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 4/22/2005 9:47:25 AM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 9:59:44 PM (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    Bobbie Jo

    1A22-0206-0530-1610-5715-1441*

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 8:35:32 AM
    Nero Version: 6.6.0.12
    Internal Version: 6, 6, 0, 12d

    Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.6.0.12
    Adapter driver: <Virtual Device> HA -1
    Drive buffer :
    CD-ROM: <HL-DT-ST RW/DVD GCC-4480B>Version: C104 - HA 1 TA 0 - 6.6.0.12
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : IC35L090AVV207-0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST RW/DVD GCC-4480B atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST RW/DVD GCC-4480B D: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 509MB (522220kB)
    Free physical memory: 150MB (154588kB)
    Memory in use : 70 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    22.2.2007
    Copy disc to image
    11:33:49 AM #1 Text 0 File DlgWaitCD.cpp, Line 272
    Write in overburning mode: NO (enabled: CD)

    11:33:49 AM #2 Text 0 File DlgWaitCD.cpp, Line 438
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Disc blank or invalid. Need valid original disc.
    (Medium in drive: Unknown. Medium required by compilation: CD.)

    11:33:49 AM #3 Phase 23 File dlgbrnst.cpp, Line 1832
    Reading disc aborted


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 12:07:32 PM
    File 'WNASPINT.DLL': Ver=V1.20, size=57344 bytes, created 2/4/2003 7:24:08 AM
    File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 4/22/2005 9:47:25 AM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 9:59:44 PM (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    Bobbie Jo

    1A22-0206-0530-1610-5715-1441*

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 8:35:32 AM
    Nero Version: 6.6.0.12
    Internal Version: 6, 6, 0, 12d
    (Nero Express)
    Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.6.0.12
    Adapter driver: <Virtual Device> HA -1
    Drive buffer :
    CD-ROM: <HL-DT-ST RW/DVD GCC-4480B>Version: C104 - HA 1 TA 0 - 6.6.0.12
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : IC35L090AVV207-0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST RW/DVD GCC-4480B atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST RW/DVD GCC-4480B D: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 509MB (522220kB)
    Free physical memory: 136MB (139280kB)
    Memory in use : 73 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    22.2.2007
    DVD-Copy on the fly
    11:36:00 AM #1 Text 0 File Reader.cpp, Line 127
    Reader running

    11:36:00 AM #2 Text 0 File DVDCopy.cpp, Line 279
    DVD Track-Information from source disc
    Last LBA on layer 0 = 1885887 / 0x1CC6BF / 3683MB
    S01 T01 Con 0x14 Start 0 Len 3771763 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)

    11:36:00 AM #3 CDCOPY -33 File DVDCopy.cpp, Line 319
    This DVD is copy-protected and cannot be read


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 12:07:32 PM
    File 'WNASPINT.DLL': Ver=V1.20, size=57344 bytes, created 2/4/2003 7:24:08 AM
    File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 4/22/2005 9:47:25 AM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 9:59:44 PM (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    Bobbie Jo

    1A22-0206-0530-1610-5715-1441*

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 8:35:32 AM
    Nero Version: 6.6.0.12
    Internal Version: 6, 6, 0, 12d
    (Nero Express)
    Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.6.0.12
    Adapter driver: <Virtual Device> HA -1
    Drive buffer :
    CD-ROM: <HL-DT-ST RW/DVD GCC-4480B>Version: C104 - HA 1 TA 0 - 6.6.0.12
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : IC35L090AVV207-0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST RW/DVD GCC-4480B atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST RW/DVD GCC-4480B D: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 509MB (522220kB)
    Free physical memory: 134MB (137828kB)
    Memory in use : 73 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    24.2.2007
    DVD-Copy over Image
    12:15:47 PM #1 Text 0 File Reader.cpp, Line 127
    Reader running

    12:15:47 PM #2 Text 0 File DVDCopy.cpp, Line 279
    DVD Track-Information from source disc
    S01 T01 Con 0x14 Start 0 Len 3920320 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)

    12:15:47 PM #3 CDCOPY -33 File DVDCopy.cpp, Line 319
    This DVD is copy-protected and cannot be read


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 12:07:32 PM
    File 'WNASPINT.DLL': Ver=V1.20, size=57344 bytes, created 2/4/2003 7:24:08 AM
    File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 4/22/2005 9:47:25 AM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 9:59:44 PM (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    Bobbie Jo

    1A22-0206-0530-1610-5715-1441*

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 8:35:32 AM
    Nero Version: 6.6.0.12
    Internal Version: 6, 6, 0, 12d

    Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.6.0.12
    Adapter driver: <Virtual Device> HA -1
    Drive buffer :
    CD-ROM: <HL-DT-ST RW/DVD GCC-4480B>Version: C104 - HA 1 TA 0 - 6.6.0.12
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : IC35L090AVV207-0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST RW/DVD GCC-4480B atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST RW/DVD GCC-4480B D: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 509MB (522220kB)
    Free physical memory: 116MB (119132kB)
    Memory in use : 77 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    24.2.2007
    Copy disc to image
    12:23:03 PM #1 Text 0 File DlgWaitCD.cpp, Line 272
    Write in overburning mode: NO (enabled: CD)

    12:23:03 PM #2 Text 0 File DlgWaitCD.cpp, Line 438
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Disc blank or invalid. Need valid original disc.
    (Medium in drive: Unknown. Medium required by compilation: CD.)

    12:23:03 PM #3 Phase 23 File dlgbrnst.cpp, Line 1832
    Reading disc aborted


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 12:07:32 PM
    File 'WNASPINT.DLL': Ver=V1.20, size=57344 bytes, created 2/4/2003 7:24:08 AM
    File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 4/22/2005 9:47:25 AM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 9:59:44 PM (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    Bobbie Jo

    1A22-0206-0530-1610-5715-1441*

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 8:35:32 AM
    Nero Version: 6.6.0.12
    Internal Version: 6, 6, 0, 12d
    (Nero Express)
    Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.6.0.12
    Adapter driver: <Virtual Device> HA -1
    Drive buffer :
    CD-ROM: <HL-DT-ST RW/DVD GCC-4480B>Version: C104 - HA 1 TA 0 - 6.6.0.12
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : IC35L090AVV207-0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST RW/DVD GCC-4480B atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST RW/DVD GCC-4480B D: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 509MB (522220kB)
    Free physical memory: 222MB (228152kB)
    Memory in use : 56 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    24.2.2007
    Copy disc to image
    5:55:45 PM #1 Text 0 File DlgWaitCD.cpp, Line 272
    Write in overburning mode: NO (enabled: CD)

    5:55:45 PM #2 Text 0 File DlgWaitCD.cpp, Line 438
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert the original disc.
    (Medium in drive: Unknown. Medium required by compilation: CD.)

    5:55:45 PM #3 Phase 23 File dlgbrnst.cpp, Line 1832
    Reading disc aborted


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 12:07:32 PM
    File 'WNASPINT.DLL': Ver=V1.20, size=57344 bytes, created 2/4/2003 7:24:08 AM
    File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 4/22/2005 9:47:25 AM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 9:59:44 PM (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    Bobbie Jo

    1A22-0206-0530-1610-5715-1441*

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 8:35:32 AM
    Nero Version: 6.6.0.12
    Internal Version: 6, 6, 0, 12d
    (Nero Express)
    Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.6.0.12
    Adapter driver: <Virtual Device> HA -1
    Drive buffer :
    CD-ROM: <HL-DT-ST RW/DVD GCC-4480B>Version: C104 - HA 1 TA 0 - 6.6.0.12
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : IC35L090AVV207-0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST RW/DVD GCC-4480B atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST RW/DVD GCC-4480B D: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 509MB (522220kB)
    Free physical memory: 177MB (181936kB)
    Memory in use : 65 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    24.2.2007
    Copy disc to image
    5:57:34 PM #1 Text 0 File DlgWaitCD.cpp, Line 272
    Write in overburning mode: NO (enabled: CD)

    5:57:34 PM #2 Text 0 File DlgWaitCD.cpp, Line 438
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Disc blank or invalid. Need valid original disc.
    (Medium in drive: Unknown. Medium required by compilation: CD.)

    5:57:34 PM #3 Phase 23 File dlgbrnst.cpp, Line 1832
    Reading disc aborted


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 12:07:32 PM
    File 'WNASPINT.DLL': Ver=V1.20, size=57344 bytes, created 2/4/2003 7:24:08 AM
    File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 4/22/2005 9:47:25 AM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 9:59:44 PM (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    Bobbie Jo

    1A22-0206-0530-1610-5715-1441*

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 8:35:32 AM
    Nero Version: 6.6.0.12
    Internal Version: 6, 6, 0, 12d
    (Nero Express)
    Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.6.0.12
    Adapter driver: <Virtual Device> HA -1
    Drive buffer :
    CD-ROM: <HL-DT-ST RW/DVD GCC-4480B>Version: C104 - HA 1 TA 0 - 6.6.0.12
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : IC35L090AVV207-0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST RW/DVD GCC-4480B atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST RW/DVD GCC-4480B D: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 509MB (522220kB)
    Free physical memory: 174MB (178556kB)
    Memory in use : 65 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    24.2.2007
    Copy disc to image
    5:58:04 PM #1 Text 0 File DlgWaitCD.cpp, Line 272
    Write in overburning mode: NO (enabled: CD)

    5:58:04 PM #2 Text 0 File DlgWaitCD.cpp, Line 438
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Disc blank or invalid. Need valid original disc.
    (Medium in drive: Unknown. Medium required by compilation: CD.)

    5:58:04 PM #3 Phase 23 File dlgbrnst.cpp, Line 1832
    Reading disc aborted


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 12:07:32 PM
    File 'WNASPINT.DLL': Ver=V1.20, size=57344 bytes, created 2/4/2003 7:24:08 AM
    File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 4/22/2005 9:47:25 AM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 9:59:44 PM (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    Bobbie Jo

    1A22-0206-0530-1610-5715-1441*

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 8:35:32 AM
    Nero Version: 6.6.0.12
    Internal Version: 6, 6, 0, 12d
    (Nero Express)
    Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.6.0.12
    Adapter driver: <Virtual Device> HA -1
    Drive buffer :
    CD-ROM: <HL-DT-ST RW/DVD GCC-4480B>Version: C104 - HA 1 TA 0 - 6.6.0.12
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : IC35L090AVV207-0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST RW/DVD GCC-4480B atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST RW/DVD GCC-4480B D: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 509MB (522220kB)
    Free physical memory: 174MB (179004kB)
    Memory in use : 65 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    24.2.2007
    Copy disc to image
    5:58:26 PM #1 Text 0 File DlgWaitCD.cpp, Line 272
    Write in overburning mode: NO (enabled: CD)

    5:58:26 PM #2 Text 0 File DlgWaitCD.cpp, Line 438
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Disc blank or invalid. Need valid original disc.
    (Medium in drive: Unknown. Medium required by compilation: CD.)

    5:58:26 PM #3 Phase 23 File dlgbrnst.cpp, Line 1832
    Reading disc aborted


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 12:07:32 PM
    File 'WNASPINT.DLL': Ver=V1.20, size=57344 bytes, created 2/4/2003 7:24:08 AM
    File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 4/22/2005 9:47:25 AM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 9:59:44 PM (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
     
  9. bobbiejoc

    bobbiejoc Guest

    I had been using sony DVD-R and was told that I should be using DVD+R
    I bought the new disks to see if that would help and it didn't still not reading so I sent the drive back to sony AGAIN. I was under the impression that the drive I had bought could use both - and +
     
  10. 56delray

    56delray Regular member

    Joined:
    Feb 8, 2007
    Messages:
    659
    Likes Received:
    0
    Trophy Points:
    26
    1A22-xxxx-xxxx-xxxx-xxxx-xxxx*

    - EDIT OUT the serial number.
    As you have more then one burn logged in the logfile there are a few occurrences of the serial number

    Each time you see
    ====== *** Nero-Burning Rom, History File *** ======

    It is the start of a new log.
    Most times you only need to post one.

    edit
    Try this tool.

    Try running the Nero ASPI checker tool.

    You are using a lot of memory when your tring to burn.
    Cut down on running programs or surfing when burning.

    2nd edit

    I do not see your burner listed on the device map.
    You have Nero using a Image Recorder.
     
    Last edited: Jun 13, 2007

Share This Page