Hi there people can anyone tell me if there is a way to upgrade your starview so that you no longer need codes? gettin sick of needin to do it every second day! cheers!!!
If you have a clone there is a special version for you, if it's genuine then flash with the latest firmware. Follow link in my sig for more info.
You will need to find out if you have a clone or genuine box, click the SV EV Info link at the end of my post to find out which one you have. You will need a null modem cable DB9F to DB9F. Null Modem Cable http://www.maplin.co.uk/Search.aspx?criteria=L71BT&DOY=2m6 If your pc does not have a serial port you will need a USB to serial port adapter to use in conjunction with the null modem cable. USB Adapter info http://www.maplin.co.uk/Module.aspx?Modu...erial Adaptor These two cable links are only for reference as they can be purchased alot cheaper on fleabay. All firmware/loader can be found in the link at the end of my post marked Eamos FTA Library. You will need the GTromloader V4, (Starvi*w Software Uploader), found in the Starvi*w software folder of the link. You will need version either V4.00 firmware for GENUINE box or V2.57eE Fixed fo a CLONE box, both found in "Starvi*w" firmware folder. Updating Firmware Connect your box and PC with a Null modem cable and switch on the cable box and put it on STANDBY. (The Starview does not need to be connected to TV to update it with GTROM) Open GTROM Loader software make sure that you set the correct COM PORT that matches the one that is being used Make sure App file only is selected, then click Bin File & browse to the firmware where you downloaded it to on your PC. Run the GTROM loader by pressing Download and you will see the % progress increase then Download completed message on your PC. Wait until you see the DOWNLOAD COMPLETE pop up on your PC before removing the NULL MODEM CABLE. The Starvi*w will then reboot Turn off and turn back on , then plug your tv cable and scart back in