I'm using Sony DRU510A and getting Invalid field in command error from Nero 5.5.10.54. I installed it as my slave drive. My master drive is Sony CD-RW. I tried to create a backup DVD following the guide at DVDShrink.info and the guide at www.chrismccann.co.uk. I used DVDShrink to rip and compress. Using Memorex DVD-RW 1x-2x. My system is WINXP, 768 megs memory. Another error along with the one i mention above is "Could not perform start of Disc-At-Once". I have tried changing my IDE Secondary Channel settings but still no luck. I'm tired of messing with this drive. Can someone please help me. Here is my Nero log: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 1/29/2003 10:37:36 PM Nero Version: 5.5.10.54 Recorder: <SONY DVD RW DRU-510A> Version: 1.0d - HA 1 TA 1 - 5.5.10.54 Adapter driver: <atapi> HA 1 Drive buffer : 8192kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <SONY CD-RW CRX195E1>Version: ZYS2 - HA 1 TA 0 - 5.5.10.54 Adapter driver: <atapi> HA 1 Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : MAXTOR 6L040J2 atapi Port 0 ID 0 DMA: On CdRomPeripheral : SONY CD-RW CRX195E1 atapi Port 1 ID 0 DMA: On CdRomPeripheral : SONY DVD RW DRU-510A atapi Port 1 ID 1 DMA: Off ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 767MB (785412kB) Free physical memory: 548MB (561916kB) Memory in use : 28 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Enabled (1) Wizard: Off 4.12.2003 UDF/ISO compilation 9:41:49 PM #1 Text 0 File Isodoc.cpp, Line 7604 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 2 (Max. of 31 chars) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 9:41:49 PM #2 Phase 111 File dlgbrnst.cpp, Line 1655 DVD-Video files sorted 9:41:49 PM #3 Text 0 File Reader.cpp, Line 115 Reader running 9:41:49 PM #4 ISO9660GEN -11 File geniso.cpp, Line 4571 First writeable address = 0 (0x00000000) 9:41:49 PM #5 ISO9660GEN -11 File geniso.cpp, Line 4571 First writeable address = 0 (0x00000000) 9:41:49 PM #6 Text 0 File Burncd.cpp, Line 3769 Turn on Disc-At-Once, using DVD media 9:41:49 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 672 Setup items (original item values) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original CD pos #0 + 2286416 (2286416) = #2286416/508:5.41 relocatable, CD pos for caching/writing not required/required, no patch infos -------------------------------------------------------------- 9:41:50 PM #8 Text 0 File DlgWaitCD.cpp, Line 229 Last possible write address on media: 2297887 (510:38.37) Last address to be written: 2286415 (508:05.40) 9:41:50 PM #9 Text 0 File DlgWaitCD.cpp, Line 234 Write in overburning mode: FALSE 9:41:50 PM #10 Text 0 File DlgWaitCD.cpp, Line 1703 Recorder: SONY DVD RW DRU-510A, Media type: DVD-RW Disc Manufacturer: RITEKW - 01 Disc Application Code: 64, Disc Physical Code: 214 9:41:50 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 824 Prepare recorder SONY DVD RW DRU-510A for write in cue-sheet-DAO DAO infos: ========== MCN: TOCTYPE: 0x0 Session Closed, CD fixated Tracks 1 to 1: TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 387919872 9:41:50 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 672 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original CD pos #0 + 2286416 (2286416) = #2286416/508:5.41 relocatable, CD pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286416 blocks [SONY DVD RW DRU-510A ] -------------------------------------------------------------- 9:41:50 PM #13 Phase 24 File dlgbrnst.cpp, Line 1655 Caching of files started 9:41:50 PM #14 Phase 25 File dlgbrnst.cpp, Line 1655 Caching of files completed 9:41:50 PM #15 Phase 36 File dlgbrnst.cpp, Line 1655 Burn process started at 2x (2,760 KB/s) 9:41:52 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1978 Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0 9:41:52 PM #17 Text 0 File DVDR.cpp, Line 1322 Recording mode: Sequential Recording Mode 9:41:52 PM #18 Text 0 File Mmc.cpp, Line 19092 Set BUFE: Power-Burn -> ON 9:41:52 PM #19 Text 0 File DVDR.cpp, Line 1436 Start write address at LBA 0 DVD high compatibility mode: Yes 9:41:52 PM #20 Text 0 File Cdrdrv.cpp, Line 7931 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-RW (3), Part Version: 2 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Media Specific: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 9:41:52 PM #21 SCSI -1066 File Cdrdrv.cpp, Line 1241 SCSI Exec, HA 1, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x22 0xE3 0x50 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0xFF 0xFD 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x24 0x00 9:41:52 PM #22 DVDR -1066 File ThreadedTransferInterface.cpp, Line 1423 Invalid field in command 9:41:52 PM #23 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1423 Could not perform start of Disc-At-Once 9:41:52 PM #24 Phase 38 File dlgbrnst.cpp, Line 1655 Burn process failed at 2x (2,760 KB/s) 9:41:52 PM #25 Text 0 File Scsicmd.cpp, Line 406 SCSI not using temporary buffers 20 out of 20 temporary buffers allocated
Hi, got the same problem, different equipment though. Also NERO 5.5.10.xxxxxx under XP. Something I found from the log: I've enabled overburning to be able to burn a 900 Mb CD but in the log it says 'overburning FALSE'? In my case I think it's a users error, because the writer is a DVD/CD writer and should be able to handle this kinds of disks. Maybe we can compare settings to see if there's a mutual error? -------------------------------------------------------------- 11:26:07 #15 Text 0 File DlgWaitCD.cpp, Line 225 Last possible write address on media: 449999 (100:01.74) Last address to be written: 436136 (96:57.11) 11:26:07 #16 Text 0 File DlgWaitCD.cpp, Line 230 Write in overburning mode: FALSE 11:26:07 #17 Text 0 File DlgWaitCD.cpp, Line 1700 Recorder: _NEC DVD+RW ND-1100A; CDR code: 00 97 27 19; OSJ entry from: Plasmon Data systems Ltd. ATIP Data: Special Info [hex] 1: D0 00 A0, 2: 61 1B 13 (LI 97:27.19), 3: 4F 3B 4A (LO 79:59.74) Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid) 11:26:08 #18 Text 0 File ThreadedTransferInterface.cpp, Line 824 Prepare recorder _NEC DVD+RW ND-1100A for write in cue-sheet-DAO DAO infos: ========== MCN: TOCTYPE: 0x20 Session Closed, CD fixated Tracks 1 to 2: TRM_DATA_MODE2_2336, 2336/0x0, ISRC "", FilePos 0 350400 2955040 TRM_DATA_MODE2_2336, 2336/0x0, ISRC "", FilePos 2955040 3305440 1019166432 11:26:08 #19 Text 0 File ThreadedTransferInterface.cpp, Line 672 Setup items (after recorder preparation) 0: TRM_DATA_MODE2_2336 (CTransferItem) 2 indices, index0 (150) not provided original CD pos #0 + 1115 (1115) = #1115/0:14.65 relocatable, CD pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE2_2336, 2336, config 0, wanted index0 0 blocks, length 1115 blocks [_NEC DVD+RW ND-1100A ] 1: TRM_DATA_MODE2_2336 (American Pie - the wedding) 2 indices, index0 (150) not provided original CD pos #0 + 434872 (434872) = #434872/96:38.22 relocatable, CD pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE2_2336, 2336, config 0, wanted index0 0 blocks, length 434872 blocks [_NEC DVD+RW ND-1100A ] -------------------------------------------------------------- 11:26:09 #20 Phase 24 File dlgbrnst.cpp, Line 1655 Caching of files started 11:26:10 #21 Phase 25 File dlgbrnst.cpp, Line 1655 Caching of files completed 11:26:10 #22 Phase 36 File dlgbrnst.cpp, Line 1655 Burn process started at 16x (2.400 kB/sec) 11:26:10 #23 Text 0 File ThreadedTransferInterface.cpp, Line 1978 Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0 11:26:10 #24 Text 0 File ThreadedTransferInterface.cpp, Line 1978 Verifying CD position of item 1 (relocatable, no CD pos, no patch infos, orig at #0): write at #1265 11:26:10 #25 Text 0 File Mmc.cpp, Line 14196 StartDAO : CD-Text - Off 11:26:10 #26 Text 0 File Mmc.cpp, Line 18682 Set BUFE: JustLink -> ON 11:26:10 #27 SCSI -1067 File Cdrdrv.cpp, Line 1241 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0246D000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x00 CDB Data: 0x5D 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x30 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x26 0x00 11:26:10 #28 Text 0 File Mmc.cpp, Line 14456 CueData, Len=48 41 00 00 24 00 00 00 00 41 01 00 20 00 00 00 00 41 01 01 20 00 00 02 00 41 02 00 20 00 00 10 41 41 02 01 20 00 00 12 41 41 aa 01 24 00 60 39 0c 11:26:10 #29 DVDR -1067 File ThreadedTransferInterface.cpp, Line 1423 Invalid field in parameter 11:26:10 #30 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1423 Could not perform start of Disc-At-Once
Do you have Roxio installed? I had to remove it to get Nero to burn. I got similar errors. Also check firmware or bios for your drive.
tuc23- You should have your Nero set to your burner under Recorder > Chose Recorder. Close the Wizard, select DVD-Video from the File > New options. Navigate to the folder where you stored your DVD Shrink IFO, BUP and VOB files. Select them all & drag them to your compilation window. You're ready to burn. <<-- Swap your drives around on your IDE chain and make the DVD drive a master. Turn on DMA in the Control Panel. luck- RWG
Hey RWG I have switched DVD-RW to master and CD-RW to slave. I'm unable to turn on DMA on my secondary channel for the master drive. I select the option "DMA If Avaible", I reboot my PC. It still is in PIO Mode for the master drive. The slave drive(CD-RW) is Ultra DMA Mode 2. How do I force the DVD-RW to Ultra DMA Mode? I'm able to burn a DVD/Video with RecordNow and burnatonce. Nero is not working though. Maybe I just need to stick with what works. But I sure would like to user Nero. Thanks in advance.
If you aren't able to turn on DMA it my not be possible to force it. If you can record with RecordNow DX you should be able to use Nero 6. Can you record a CD with your Sony drive? Does your copy of Nero recognize it - lower right corner of the Nero window (w/o Wizard)? Have you selected the DVD bnurner under Chose Recorders? If not, I'd suggest d/l'ing the new Nero 6.3.0.0. Uninstall your previous version and install Nero 6.3 -or- upgrading to 6.3.0.0 for upgrades sake. later- RWG
Hi RWG Thanks for the advice, I found a little utility on Dell's forum that forces all drives to DMA. You can go to http://support.dell.com/filelib/download.aspx?FileID=63977&releaseid=r53986 to download the utility. Just follow the instructions. Once I did that I reinstall NERO 5.5.10.54. Was able to burn a DVD-Video, but when I played it on mya standalone DVD player. It hung up with about 5 mins to go in the movie. Not sure what happened here. I will try it a couple more times, if all fails, I will continue using RecordNow. Thanks alot RWG.
