hi, when i go to formatting the dvd..i get the message "inser media in D:"....although I have...amybe my drives busted....although i can burn cd's but not dvd's. cheers
Hi I have recently bought a Dell Dimension 5000 and im having a problem because the Phillips DVD+RW will not read. May this be due to Sonic or Nero please help
Hi all, just to let you guys know that DVD Cloner II is really DVD Shrink 3.17 (second to last version of what is out there). There was a point where I was ripping a movie a for some reason DVD Shrink showed up and I have never installed the software before.
yo bbmayo, Have updated firmware to CD21.exe yesterday...it removed a couple of things from my DVD properties like DLA checks and speed settings. It now allows sonic to read the DVD and goes through the motions of burning but 3/4ths through falls over saying burning failed. This is happeneing even data dvd's...not even movie burnings? Any suggestions. regards, nc
Okay, I am having the same exact problem. I use DVD Shrink and Nero 6.6.08. The movie shrinks nicely and then Nero writes the Lead-In and then I get this error message: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM Nero API version: 6.6.0.8 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Recorder: <PIONEER DVD-RW DVR-106D>Version: 1.07 - HA 1 TA 1 - 6.6.0.8 Adapter driver: <viadsk> HA 1 Drive buffer : 2000kB Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : HDS722540VLAT20 V31O viadsk Port 0 ID 0 DMA: Off CdRomPeripheral : IDE DVD-ROM 16X 7.92 viadsk Port 1 ID 0 DMA: Off CdRomPeripheral : PIONEER DVD-RW DVR-106D1.07 viadsk Port 1 ID 1 DMA: Off === CDRom-Device-Map === IDE DVD-ROM 16X D: CDRom0 PIONEER DVD-RW DVR-106D E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 36700160 (36700160) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 223MB (228848kB) Free physical memory: 59MB (61140kB) Memory in use : 73 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.3.2005 NeroAPI 6:09:31 PM #1 Phase 112 File APIProgress.cpp, Line 276 DVD-Video files reallocation started 6:09:31 PM #2 Phase 114 File APIProgress.cpp, Line 276 DVD-Video files reallocation completed (no file modified) 6:09:31 PM #3 Phase 111 File APIProgress.cpp, Line 276 DVD-Video files sorted 6:09:32 PM #4 Text 0 File Reader.cpp, Line 127 Reader running 6:09:32 PM #5 Text 0 File Writer.cpp, Line 122 Writer PIONEER DVD-RW DVR-106D running 6:09:32 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 6:09:32 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3293 First writeable address = 0 (0x00000000) 6:09:32 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3293 First writeable address = 0 (0x00000000) 6:09:32 PM #9 Text 0 File Burncd.cpp, Line 3153 Turn on Disc-At-Once, using DVD media 6:09:32 PM #10 Text 0 File DlgWaitCD.cpp, Line 259 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2286127 (508:01.52, 4465MB) 6:09:32 PM #11 Text 0 File DlgWaitCD.cpp, Line 271 Write in overburning mode: NO 6:09:33 PM #12 Text 0 File DlgWaitCD.cpp, Line 2316 Recorder: PIONEER DVD-RW DVR-106D, Media type: DVD-R Disc Manufacturer: RITEKG - 04 Disc Application Code: 64, Disc Physical Code: 193 6:09:33 PM #13 Text 0 File DlgWaitCD.cpp, Line 433 >>> Protocol of DlgWaitCD activities: <<< ========================================= 6:09:33 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [PIONEER DVD-RW DVR-106D] -------------------------------------------------------------- 6:09:33 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [PIONEER DVD-RW DVR-106D] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2286128 | lead-out | 1 | 0x41 | 0x00 6:09:34 PM #16 Phase 24 File APIProgress.cpp, Line 276 Caching of files started 6:09:34 PM #17 Text 0 File Burncd.cpp, Line 4040 Cache writing successful. 6:09:34 PM #18 Phase 25 File APIProgress.cpp, Line 276 Caching of files completed 6:09:34 PM #19 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 4x (5,540 KB/s) 6:09:41 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 6:09:41 PM #21 Text 0 File DVDR.cpp, Line 2194 Recording mode: Sequential Recording Mode 6:09:41 PM #22 Text 0 File Mmc.cpp, Line 21235 Set BUFE: Buffer underrun protection -> ON 6:09:41 PM #23 Text 0 File DVDR.cpp, Line 2340 Start write address at LBA 0 DVD high compatibility mode: Yes 6:09:41 PM #24 Text 0 File Cdrdrv.cpp, Line 8430 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 6:09:42 PM #25 SCSI -31 File Cdrdrv.cpp, Line 1435 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x015F0000 Status: 0xE6 (0x0E, SCSI_BUFFER_TO_BIG) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 6:09:42 PM #26 SCSI -31 File Cdrdrv.cpp, Line 1435 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B4E0600 Status: 0xE6 (0x0E, SCSI_BUFFER_TO_BIG) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 6:09:42 PM #27 Text 0 File Mmc.cpp, Line 18866 Writer-Buffer for PIONEER DVD-RW DVR-106D\H1 T1 reduced to 32768Bytes 6:09:42 PM #28 SCSI -31 File Cdrdrv.cpp, Line 1435 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x05CD5E00 Status: 0xE6 (0x0E, SCSI_BUFFER_TO_BIG) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 6:09:42 PM #29 CDR -31 File Writer.cpp, Line 311 Buffer too large PIONEER DVD-RW DVR-106D\H1 T1 6:09:42 PM #30 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 6:09:42 PM #31 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 6:09:42 PM #32 Text 0 File DVDR.cpp, Line 2603 EndDAO: Last written address was -1 6:09:42 PM #33 Phase 38 File APIProgress.cpp, Line 276 Burn process failed at 4x (5,540 KB/s) 6:09:42 PM #34 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 6:09:42 PM #35 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'WNASPINT.DLL': Ver=V1.20, size=57344 bytes, created 2/4/2003 11:24:08 AM Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) Here's the thing: I tried an alternate method and used DVD SHRINK to shrink the movie and save it to my hard disk. Next, I went manually into NERO BURNING ROM and created my own DVD-Video using the TOS files I'd just created with Shrink. It burned fine, on the same media I've been using. So it cannot very well be my media or burner or firmware, right? Seems to be an issue between Shrink and Nero? PLEASE HELP. I'm glad my burner still works but it's taking twice the time to shrink, then manually burn from Nero.
hi, I've saved the files from DVD shrink to my Hard Disk. What steps have u followed to burn via Nero because I tried burning the files via Sonic "data DVD" and the files got burnt but apparently not in the DVD format for playing the dvd's on the dvd player. Could you spell out the steps for me please. cheers
After you burn using DVD Shrink, go into NERO BURNING ROM. Choose the DVD option called DVD-Video. Click NEW. You will see 4 columns. The third column will contain a list of items on your computer. Choose the location that you saved the files to (like, C:\My Documents or whatever you saved it to). When you see the folder, click it. The files in the folder will appear in the 4th column. Select them all and drag them into the RED VIDEO_TS folder that you see in the 2nd column. They should just fit on the DVD since you already shrunk them with DVD Shrink. Then just click the BURN button (the little CD icon with a flame on it). That should work. W/B with success or errors.
I am using a philips DVD+-RW DVD8631 and maxwell dvd-r discs i use dvdshrink 3.2 and nero to burn when i go to burn says please use a writeable disc what can i do to fix this also im tring to burn at 4x
I was having the smae problem were as my dvd burning was giving an error message stating that it could not burn disc at once wheather i was using Nero or dvd shrink. But i'm going to try to Change the settings bck to DMA and see if that works. If any solution are known please let me know Thanks
