Please complete the following step in the order in which they appear. Failure to comply might result in damage to your computer -hardware Windows Updates Every version of windows requires updates. These updates correct a multitude of problems that are found, on many levels. To be sure your system is completely up to date go to http://windowsupdate.microsoft.com If you are using Windows XP please visit http://www.microsoft.com/windowsxp/default.asp If you are using Windows 2000 please visit http://www.microsoft.com/windows2000/default.asp You will also want to update your Direct X control to insure full functionality of any of our programs. You will want to download, and install Direct X 9 from http://www.microsoft.com/windows/directx/downloads Blacklist The following programs can cause problems while using our software. Your situation sounds like one of these are installed: 1. B's Clip: This package will load a packet-writing software that will constantly talk to your CD/DVD writer, and can cause a number of issues while trying to write a disc. Disabling this software is not enough, as a portion of this package is always running after you start Windows. You will need to uninstall it in Add/Remove Programs, then reboot to remove it. For more information, visit the B's website at http://www.bhacorp.com. 2. Direct CD or Drag to Disk: These are applications from Easy CD Creator from Roxio. This package will load a packet-writing software that will constantly talk to your CD/DVD writer, and can cause a number of issues while trying to write a disc. Disabling this software is not enough, as a portion of this package is always running after you start Windows. To remove them you need to go to Add/Remove Programs in the Control Panel. There you can select Easy CD Creator to Change - not Remove. Then you click next until it gives you the option to Modify. Then either Direct CD or Drag to Disk should be selected and changed to "make this option not available". Then click Next. While the program may look like it is installing, it is actually removing those options. For more information, please visit Roxio's website at http://www.roxio.com/en/support.index.jhtml 3. GoBack: This is backup software that constantly runs in the background (Terminate and Stay Ready) which not only needs to be turned off, but disabled. Unfortunately, this may cause some restore points to vanish, but it will free up a lot of hard drive space. For more information visit Symantec's web site for GoBack at http://www.symantec.com/goback/index.html 4. DLA: Also HP-DLA, Veritas DLA, and others. DLA stands for Disk Letter Assignment. This package will load a packet-writing software that will constantly talk to your CD/DVD writer, and can cause a number of issues while trying to write a disc. Disabling this software is not enough, as a portion of this package is always running after you start Windows. You will need to uninstall it in Add/Remove Programs, then reboot to remove it. 5. InCD: This is packet writing software that comes bundled with Ahead Nero Burning Rom. This package will load a packet-writing software that will constantly talk to your CD/DVD writer, and can cause a number of issues while trying to write a disc. Disabling this software is not enough, as a portion of this package is always running after you start Windows. You will need to uninstall it in Add/Remove programs, then reboot to remove it. For more information go to Nero's website at http://www.nero.com/en/ 6. Interactual Player and PC Friendly Player: These programs are DVD software viewers that often come on DVD movie discs, and will try to install themselves everytime you watch a movie on your computer. Please make sure to NOT let these install. Both programs interfere with all 321 Studios software and should be un-installed from Add/Remove Programs in Control Panel when found. In some cases, you will need to uninstall and reinstall our software to restore functionality after removing one of these. For more information about both players, visit http://player.interactual.com/ 7. McAfee Anti-Virus: This is anti-virus software that when running, can cause errors. It needs to be disabled by right clicking on the icon in the lower right side of the task bar. The 321 Studios software then needs to be restarted. Whenever you are using our software, McAfee needs to be disabled to ensure unrestricted access to your drive. For more info go to McAfee's website at http://us.mcafee.com/default.asp 8. Norton Anti-Virus: This is anti-virus software that when running, can cause errors. It needs to be disabled by right clicking on the icon in the lower right side of the task bar and the automatic updates should be disabled. The 321 Studios software then needs to be restarted. Whenever you are using our software, Norton needs to be disabled to ensure unrestricted access to your drive. The Norton Website is http://www.symantec.com/ 9. StopZilla: StopZilla can hinder required portions of our installer, causing the software to fail. Please completely disable StopZilla, then install our software. Once our software is installed, you may safely enable it again. If you have any difficulty using our software at a later time, you may need to disable StopZilla before going to use our software. Uninstallation is not required. 10. MyStorageGuard: This backup software can hinder certain required files from being copied during the installation. Please disable this program before installing our software, and have it disabled any time you go to use our software. Uninstallation is not required. 11. Napster 2.0: This software includes some basic burning software that can cause burning problems if it is running. You will need to close this program completely before trying to use our software. In some rare cases, you will need to completely uninstall this package to attain full reliability, so if disabling does not solve your issue, please try uninstalling this software, and try again. 12. Easy CD Creator 4.x: Due to the age of this package, it is no longer updated by the authors. There are bugs present in this older system that will cause NUMEROUS problems on your machine, not just with our software. Please Uninstall completely, and consider either the new 6.x version from Roxio (http://www.roxio.com) or Nero 6.x (http://www.nero.com). These packages, installed without the Packet Writing software (DirectCD/Drag to Disk/InCD), all work very well together with our software. 13. NTI FileCD: This program has packet writing software installed with it. This package will load a packet-writing software that will constantly talk to your CD/DVD writer, and can cause a number of issues while trying to write a disc. Disabling this software is not enough, as a portion of this package is always running after you start windows. You will need to uninstall it in Add/Remove Programs, then reboot twice to fully remove it. For more information go to NTI FileCD's Product page at http://www.ntius.com/default.asp?p=cdmaker/filecd_main Spyware and Ad-aware some programs can install other software that can be damaging to your Operating System. Please scan for these programs with a Spyware utility. We recommend Ad-aware, available freely at www.lavasoftusa.com If you perform any of these changes, you may need to uninstall our software, then re-install to fix any damage left. If you find some of these packages, please shut down and reboot twice to ensure that the last pieces of the conflicting software are completely removed. MSConfig - Cleaning Windows Startups Certain programs running in the background can use system resources and cause our software to experience burning issues. To disable your start up group go to start, run, and type in msconfig and hit enter, then click on the startup tab. Windows XP(Home & Pro): If you are running Windows XP you will click the disable all button. Windows Me: If you are running Windows Me disable all items that are not Windows system processes. Windows 98: If you are running Windows 98 disable all items except for Systray, Explorer and Scanreg. Windows 2000: Windows 2000 does not have this utility please make sure to close all programs through your system tray. ASPI Layer Update Please update your ASPI software by installing the software at this link: http://www.adaptec.com/worldwide/su...cat=/Product/ASPI-4.70&filekey=aspi_471a2.exe Follow the instructions carefully, and make sure to reboot afterwards. Please Reinstall Our Software Please uninstall the program in “Add / Remove programs” inside your control panel. Then go to your C: Drive in "My Computer", open your “Program Files” folder, then find the "321Studios" folder.Right click on it and select delete. Empty your “Recycle Bin”. Then reboot your computer. Once this is complete, install the newest version of the software. You can always download the newest version from the website http://www.dvdxcopy.com . Tech Suppoort Rep 17 Research Park Dr. St. Charles, MO 63304 Phone: 636-720-3703 Fax: 636-720-3899 www.dvdxcopy.com www.321studios.com www.protectfairuse.com www.dvdcopyplus.com Fight to protect your fair use rights. Visit http://www.ProtectFairUse.org
Whats the question? Certainly a lot of good information here. Most of the packet writing software listed interfere with more than just 321 Studio products. I haven't had any problems running McAfee anti-virus at the same time I'm using 321 products. _X_X_X_X_X_[small]motorcycle racer computer newbie Sony VAIO Suzuki GSXR1000[/small]
Just look out for the so-so free downlonds I have to formant and start all over I use 321 -- Thank you Nero
