1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Yet another illegal Disc problem!!!

Discussion in 'Nero discussion' started by lisa7498, Apr 18, 2007.

  1. lisa7498

    lisa7498 Member

    Joined:
    Apr 18, 2007
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    11
    Hi i have been reading everyones problems with the Illegal Disc Error
    and i have one too!!
    Have been using Bulkpaq dvd-r 4x for ages with no problems at all, then i thought i would try a better disc, so i bought some Sony Dvd-r 16x burner and low and behold i get a Illegal Disc Error surely these discs should be better than Bulkpaq, these cost me alot of money and my computer has rejected them. I have tried numerous things reading your replies like downloading just about everything i can get my hands on, but with to no avail. I have an Emachines 5260 computer which is nearly 3 years old. Have pasted my log below would really really appreciate some help please.
    Thanks


    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 12:06:00
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28/07/2004 17:51:12
    Nero API version: 6.6.0.0
    Using interface version: 6.3.1.4
    Installed in: C:\Program Files\Ahead\Nero\
    Application: ahead\Nero - Burning Rom
    Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BGS4 - HA 0 TA 0 - 6.6.0.0
    Adapter driver: <atapi> HA 0
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI

    === Scsi-Device-Map ===
    CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 0 ID 0 DMA: On
    DiskPeripheral : WDC WD2500JD-00HBB0 atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    LITE-ON DVDRW SOHW-1633S E: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 73400320 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 501MB (513860kB)
    Free physical memory: 128MB (131160kB)
    Memory in use : 74 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    18.4.2007
    NeroAPI
    10:38:54 #1 Phase 112 File APIProgress.cpp, Line 276
    DVD-Video files reallocation started

    10:38:54 #2 Phase 114 File APIProgress.cpp, Line 276
    DVD-Video files reallocation completed (no file modified)

    10:38:54 #3 Phase 111 File APIProgress.cpp, Line 276
    DVD-Video files sorted

    10:38:55 #4 Text 0 File Reader.cpp, Line 127
    Reader running

    10:38:55 #5 Text 0 File Writer.cpp, Line 122
    Writer LITE-ON DVDRW SOHW-1633S running

    10:38:55 #6 Text 0 File AudioCompilationImpl.cpp, Line 842
    DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
    DRM: Beginning burn process.

    10:38:55 #7 ISO9660GEN -11 File geniso.cpp, Line 3286
    First writeable address = 0 (0x00000000)

    10:38:55 #8 ISO9660GEN -11 File geniso.cpp, Line 3286
    First writeable address = 0 (0x00000000)

    10:38:55 #9 Text 0 File Burncd.cpp, Line 3119
    Turn on Disc-At-Once, using DVD media

    10:41:39 #10 Text 0 File DlgWaitCD.cpp, Line 256
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1826063 (405:47.38, 3566MB)

    10:41:39 #11 Text 0 File DlgWaitCD.cpp, Line 268
    Write in overburning mode: NO

    10:41:39 #12 Text 0 File DlgWaitCD.cpp, Line 2310
    Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD-R
    Disc Manufacturer: SONY16 - D1
    Disc Application Code: 64, Disc Physical Code: 193

    10:41:39 #13 Text 0 File DlgWaitCD.cpp, Line 430
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert empty disc to write to.
    (Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.)

    10:41:39 #14 Text 0 File ThreadedTransferInterface.cpp, Line 844
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 1826064 (1826064) = #1826064/405:47.39
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1826064 blocks [LITE-ON DVDRW SOHW-1633S]
    --------------------------------------------------------------

    10:41:39 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1045
    Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3739779072, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    1826064 | lead-out | 1 | 0x00 | 0x41

    10:41:39 #16 Phase 24 File APIProgress.cpp, Line 276
    Caching of files started

    10:41:39 #17 Text 0 File Burncd.cpp, Line 4135
    Cache writing successful.

    10:41:39 #18 Phase 25 File APIProgress.cpp, Line 276
    Caching of files completed

    10:41:39 #19 Phase 36 File APIProgress.cpp, Line 276
    Burn process started at 4x (5,540 KB/s)

    10:41:39 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2471
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    10:41:39 #21 Text 0 File DVDR.cpp, Line 1955
    Recording mode: Sequential Recording Mode

    10:41:39 #22 Text 0 File Mmc.cpp, Line 20542
    Set BUFE: Buffer underrun protection -> ON , SMART-BURN : OFF

    10:41:39 #23 Text 0 File DVDR.cpp, Line 2096
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    10:41:39 #24 Text 0 File Cdrdrv.cpp, Line 8259
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    10:41:41 #25 SCSI -1046 File Cdrdrv.cpp, Line 1429
    SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x00CF0000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x05

    10:41:41 #26 CDR -1046 File Writer.cpp, Line 311
    Illegal disc

    10:41:41 #27 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    10:41:41 #28 Text 0 File ThreadedTransfer.cpp, Line 223
    conversion idle, stopping reader

    10:41:41 #29 Text 0 File DVDR.cpp, Line 2338
    EndDAO: Last written address was -1

    10:41:41 #30 Phase 38 File APIProgress.cpp, Line 276
    Burn process failed at 4x (5,540 KB/s)

    10:41:41 #31 Text 0 File AudioCompilationImpl.cpp, Line 867
    DRM: DRM burn session terminated.

    10:41:41 #32 Text 0 File AudioCompilationImpl.cpp, Line 896
    DRM: Closing entire DRM handling. Bye.


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 18/08/2001 05:07:32
    File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 12:06:00
    File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 28/12/2006 16:28:08 (Prassi/Veritas driver for win 2K)
    File 'Drivers\InCDfs.SYS': Ver=4, 3, 0, 4, size=92928 bytes, created 07/09/2004 15:41:06 (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDpass.SYS': Ver=4, 3, 0, 4, size=28672 bytes, created 07/09/2004 15:41:22 (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDrec.SYS': Ver=4, 3, 0, 4, size=7680 bytes, created 07/09/2004 15:42:54 (InCD4 driver for win NT/2K/XP)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
    Last edited: Apr 18, 2007
  2. laddyboy

    laddyboy Regular member

    Joined:
    Jan 4, 2005
    Messages:
    4,188
    Likes Received:
    0
    Trophy Points:
    46
    Hello.

    Some suggestions.


    First edit your post to remove your Nero serial number beginning 1A.... It appears at the end of your red font.


    You have Nero InCD software installed which can be a problem maker. If you don't use it for packet writing, it'd be better to uninstall it with the InCD Clean Tool.

    http://www.nero.com/nero6/eng/InCD_Clean_Tool.html


    Upgrade your Nero to version 6.6.0.18, the most stable version for Nero 6. Be sure to run the Nero 6 Clean Tool after uninstalling your current version and before intalling version 6.6.0.18.

    http://www.nero.com/nero6/enu/Nero_6_CleanTool.html

    Package 1:
    http://www.dvdplusvideo.com/Nero-6.6.0.18_no_yt.exe
    Package 2:
    http://www.dvdplusvideo.com/NVE-3.1.0.21_no_yt.exe

    or

    Package 1: http://httpdl1.usw.nero.com/software/Nero6/Nero-6.6.0.18_no_yt.exe
    Package 2: http://httpdl1.usw.nero.com/software/Nero6/NVE-3.1.0.21_no_yt.exe



    The Sony D1 16X media can be a tough one for older burners with older firmware to handle. I know a lot of people use the BGS4 firmware. I don't think it burns -R 16X media well at all. I think it's happy with +R 16X for the most part. I assume this is an OEM drive that came with your system. You may need to crossflash your burner to install Liteon retail firmware.

    http://codeguys.rpc1.org/oc.html

    If this is an OEM drive that came with your system, first go to your computer vendor's site and see if they have a firmware upgrade. If not consider the crossflash procedures I linked above. Or go back to using other media.


    I don't think it'll make any difference, but you could try creating an image file with your authoring software and then try burning with ImgBurn, eliminating Nero from the burning loop.

    http://www.imgburn.com
     
  3. herbsman

    herbsman Moderator Staff Member

    Joined:
    Sep 3, 2002
    Messages:
    4,332
    Likes Received:
    0
    Trophy Points:
    66
    lisa7498 : I have edited out your Nero serial number for you & will leave you with the good advice of laddyboy (will keep an eye to see how you get on).
     
  4. lisa7498

    lisa7498 Member

    Joined:
    Apr 18, 2007
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    11
    Thanks peeps will give it a go
    Appreciate your help
    Lisa
     
  5. lisa7498

    lisa7498 Member

    Joined:
    Apr 18, 2007
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    11
    Hi, have just tried imgburn that didn't work, so will try another, if not back to bulkpaq discs for me, wanna buy 50 sony 16xburn dvd-r's anyone!!!!!!!!!!!!!!!!!!!!!!
     
  6. laddyboy

    laddyboy Regular member

    Joined:
    Jan 4, 2005
    Messages:
    4,188
    Likes Received:
    0
    Trophy Points:
    46
    I'm pretty sure it's your firmware causing the problem. This is a known issue with that particular firmware.
     
  7. lisa7498

    lisa7498 Member

    Joined:
    Apr 18, 2007
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    11
    If i email EMachines do you think they would give me a free upgrade or is it something i have to pay for?
    Lisa
     
  8. laddyboy

    laddyboy Regular member

    Joined:
    Jan 4, 2005
    Messages:
    4,188
    Likes Received:
    0
    Trophy Points:
    46
    Firmware upgrades are free if available. If any EM updates are available, you should be able to find them here:

    http://emachines.com/support/product_support.html


    If you want to crossflash your burner to use the regular Liteon burner firmware, use this:

    http://codeguys.rpc1.org/firmwares/dvdrw/1633S.BS0Y.patched-cf-mcled.rar


    It is possible given the age of your burner and the fact that this older burner is really no longer supported that the firmware upgrade may not solve the problem. I do not know if that particular Sony media was available when the last firmware update was programmed. You may end up having to experiment with other media to find some that works well with that burner. In any event, updating your firmware is the logical place to start.
     

Share This Page