Experiencing installation problem with EX5100 PVR, followed instructions as given found transponders and channel arrangments after scan. No audio or visuals. Justs stating scrambled channel on screen. When downloading thelink for the EX5100 PVR, unable to detect the reciever when trying to boot it states access denied. First time novice can anyone please help with any relevant advice in orderto recieve cable stations.
Ok if this helps ill run you through what i did to set up 3 ex5000's with no problems. The easiest thing to try is simply reflash the frirware,found here: http://forums.afterdawn.com/thread_view.cfm/674371 Also i typed the codes in manually, just go to menu, user installation, hit green,then red to add a channel, frequencies are here: http://forums.afterdawn.com/thread_view.cfm/540478 you dont need to put them all in, just each frequency once, obviously they are repeated as many channels share the same frequency. Your symbol rate is 6.875, once youve done this you will have 13 different channels entered, just hit blue to save and then update channels with the red button on the user installation screen, then that should be it, it will take a minute to scan and save and your done. Im assuming your on cable and not mmds, if your on mmds then sorry i cant help you. There are plenty of guides that will be able to help you in the forum section, trust me your not the first to need help setting a eurovox up.
"When downloading the link for the EX5100 PVR, unable to detect the receiver when trying to boot it states access denied" This sounds like the pc isnt even recognising your box, do you have the correct cables? This guide will take you through the whole process: http://forums.afterdawn.com/thread_view.cfm/674371 Also did you install the driver software for the RS232 cable? I had some trouble with this when i first tried.
