I am trying to use BackItUp with the wizard to make a DVD backup of the OS disk. I am running an Adaptec 1420A raid controller set to RAID 1; therefore I have two disks for the boot disk but each is identical to the other.I have tried about everything to get a backup of my C: drive which has about 33.5G used and it is the boot disk. I can make a boot disk for nero and boot nero, but I can't make the image of the disk drive. I have tried to use DVD's and it doesn't even take the first disk. It does a crc calculation for several minutes, then says 'that some file are locked but this is normal if this is the OS disk, push ignore to proceed' I push ignore and it fails. I then tried to make the image on a hard drive, and inorder to make an iso image. That also fails in exactly the same way. I saved the log but it is not readable with a normal editor. I had the same problem with V6.0 so I upgraded to V7.0 had the same problem then upgraded to 7.7.5 and still have the same problem. I checked the driver status on the channels and they are set to DMA. I have used Backitup to make a set of DVD's of my data drive and restore that to another disk partition and it worked perfectly. I just can't image the OS disk. Any help would be appreciated. Thank you. Robert
I hope this isn't posted twice, my system seems to have froze. I have included the backup log, I was using an editor that was misleading. If this is the RAID system drivers is there any work around or am I hooped? Thanks again Robert 07:57:36 PM Nero BackItUp: 2.7.3.2 07:57:36 PM User name: blewis 07:57:36 PM Started date: 2007/01/24 07:57:37 PM Nero API has been loaded successfully. Version: 7.5.9.0 Source file: NeroInterfaceImpl.cpp, Line: 908 07:57:38 PM Device name: D: TSSTcorp CD/DVDW SH-S182D Source file: NeroInterfaceImpl.cpp, Line: 924 07:57:38 PM Device name: Image Recorder Source file: NeroInterfaceImpl.cpp, Line: 924 07:57:40 PM Geometry of \\.\PHYSICALDRIVE0, Cylinders: 14572, MediaType: 12, TracksPerCylinder: 255, SectorsPerTrack: 63, BytesPerSector: 512, Heads: 0, Disk Number: 0, Start Block Offset: 0 Source file: DriveAccessNT.cpp, Line: 210 07:57:40 PM Geometry of \\.\PHYSICALDRIVE1, Cylinders: 30377, MediaType: 12, TracksPerCylinder: 255, SectorsPerTrack: 63, BytesPerSector: 512, Heads: 0, Disk Number: 1, Start Block Offset: 0 Source file: DriveAccessNT.cpp, Line: 210 07:57:40 PM Error opening drive: \\.\PHYSICALDRIVE2, start sector: 0, size: 0 sectors, system error: 2. Source file: DriveAccessNT.cpp, Line: 163 07:57:40 PM Total number of hard disks : 2 Source file: DriveBackupitemtree.cpp, Line: 351 07:57:40 PM Geometry of \\.\PHYSICALDRIVE0, Cylinders: 14572, MediaType: 12, TracksPerCylinder: 255, SectorsPerTrack: 63, BytesPerSector: 512, Heads: 0, Disk Number: 0, Start Block Offset: 0 Source file: DriveAccessNT.cpp, Line: 210 07:57:40 PM Wrong Partition End. (Start Sector: 0, First Sector: 63, Sectors: 234420417, HD Sectors: 234099180) Source file: HDReaderFactory.cpp, Line: 445 07:57:40 PM Partition Entry = 1 07:57:40 PM Start sector = 63 07:57:40 PM Number of sectors = 234099117 07:57:40 PM Root source = 0 07:57:40 PM Number in chain = 0 07:57:40 PM Partition type = 0x07 07:57:40 PM Extended flag = 0 07:57:40 PM Partition status = 0x80 Source file: HDReaderFactory.cpp, Line: 323 07:57:40 PM Hard disk: 0. Result: 6. Message: Scanned successfully. Source file: HDReaderFactory.cpp, Line: 71 07:57:40 PM Geometry of \\.\PHYSICALDRIVE1, Cylinders: 30377, MediaType: 12, TracksPerCylinder: 255, SectorsPerTrack: 63, BytesPerSector: 512, Heads: 0, Disk Number: 1, Start Block Offset: 0 Source file: DriveAccessNT.cpp, Line: 210 07:57:40 PM Partition Entry = 1 07:57:40 PM Start sector = 63 07:57:40 PM Number of sectors = 121997547 07:57:40 PM Root source = 0 07:57:40 PM Number in chain = 0 07:57:40 PM Partition type = 0x07 07:57:40 PM Extended flag = 0 07:57:40 PM Partition status = 0x00 Source file: HDReaderFactory.cpp, Line: 323 07:57:40 PM Partition Entry = 2 07:57:40 PM Start sector = 121997610 07:57:40 PM Number of sectors = 121997610 07:57:40 PM Root source = 0 07:57:40 PM Number in chain = 1 07:57:40 PM Partition type = 0x07 07:57:40 PM Extended flag = 0 07:57:40 PM Partition status = 0x00 Source file: HDReaderFactory.cpp, Line: 323 07:57:40 PM Partition Entry = 3 07:57:40 PM Start sector = 243995220 07:57:40 PM Number of sectors = 244011285 07:57:40 PM Root source = 0 07:57:40 PM Number in chain = 2 07:57:40 PM Partition type = 0x07 07:57:40 PM Extended flag = 0 07:57:40 PM Partition status = 0x00 Source file: HDReaderFactory.cpp, Line: 323 07:57:40 PM Hard disk: 1. Result: 6. Message: Scanned successfully. Source file: HDReaderFactory.cpp, Line: 71 07:57:41 PM Error while getting disk geometry of drive: \\.\A:, system error: 21. Source file: DriveAccessNT.cpp, Line: 179 07:57:41 PM Geometry of \\.\C:, Cylinders: 14572, MediaType: 12, TracksPerCylinder: 255, SectorsPerTrack: 63, BytesPerSector: 512, Heads: 0, Disk Number: 0, Start Block Offset: 63 Source file: DriveAccessNT.cpp, Line: 210 07:57:41 PM Identified hard disk (0) partition (0) as C:\. Source file: DriveBackupitemtree.cpp, Line: 864 07:57:41 PM Geometry of \\.\F:, Cylinders: 30377, MediaType: 12, TracksPerCylinder: 255, SectorsPerTrack: 63, BytesPerSector: 512, Heads: 0, Disk Number: 1, Start Block Offset: 63 Source file: DriveAccessNT.cpp, Line: 210 07:57:41 PM Identified hard disk (1) partition (0) as F:\. Source file: DriveBackupitemtree.cpp, Line: 864 07:57:41 PM Geometry of \\.\G:, Cylinders: 30377, MediaType: 12, TracksPerCylinder: 255, SectorsPerTrack: 63, BytesPerSector: 512, Heads: 0, Disk Number: 1, Start Block Offset: 121997610 Source file: DriveAccessNT.cpp, Line: 210 07:57:41 PM Identified hard disk (1) partition (1) as G:\. Source file: DriveBackupitemtree.cpp, Line: 864 07:57:41 PM Geometry of \\.\Z:, Cylinders: 30377, MediaType: 12, TracksPerCylinder: 255, SectorsPerTrack: 63, BytesPerSector: 512, Heads: 0, Disk Number: 1, Start Block Offset: 243995220 Source file: DriveAccessNT.cpp, Line: 210 07:57:41 PM Identified hard disk (1) partition (2) as Z:\. Source file: DriveBackupitemtree.cpp, Line: 864 07:57:43 PM File system may currently be in use for drive (\\.\C. System code: (5) Access is denied. Source file: DriveBackupitemtree.cpp, Line: 941 07:57:44 PM File system may currently be in use for drive (\\.\F. System code: (5) Access is denied. Source file: DriveBackupitemtree.cpp, Line: 941 07:57:44 PM File system may currently be in use for drive (\\.\G. System code: (5) Access is denied. Source file: DriveBackupitemtree.cpp, Line: 941 07:57:45 PM File system is clear for drive (\\.\Z. Source file: DriveBackupitemtree.cpp, Line: 949 07:57:45 PM Geometry of \\.\PHYSICALDRIVE0, Cylinders: 14572, MediaType: 12, TracksPerCylinder: 255, SectorsPerTrack: 63, BytesPerSector: 512, Heads: 0, Disk Number: 0, Start Block Offset: 0 Source file: DriveAccessNT.cpp, Line: 210 07:57:45 PM Num Sectors: 234099117 07:57:45 PM jmp: 0xeb, 0x52, 0x90 07:57:45 PM sys_id: NTFS 07:57:45 PM sect_size: 512 07:57:45 PM clust_size: 8 07:57:45 PM media_desc: 248 07:57:45 PM num_sects: 63 07:57:45 PM num_sides: 255 07:57:45 PM unknown0: 0x80 07:57:45 PM unknown1: 0x80 07:57:45 PM num_sect_l: 234420416 07:57:45 PM num_sect_h: 0 07:57:45 PM mtf_clust_l: 786432 07:57:45 PM mtf_clust_h: 0 07:57:45 PM mtf_mir_clust_l: 14651276 07:57:45 PM mtf_mir_clust_h: 0 07:57:45 PM mtf_rec_size: 246 07:57:45 PM ind_buf_size: 1 07:57:45 PM serial_num: -2140785302 07:57:45 PM unknown2: -394238368 07:57:45 PM magic_num: 0xaa55 Source file: FileSystemAnalyzer.cpp, Line: 2124 07:57:45 PM Open file system NTFS has been failed with error: -8 Source file: FileSystemAnalyzer.cpp, Line: 2275 07:57:45 PM File system (0x07) is not supported or another error was occurred. Source file: FileSystemAnalyzer.cpp, Line: 478 07:57:45 PM Open file system has been failed with error: (-1) Invalid file system Source file: FileSystemAnalyzer.cpp, Line: 503 07:57:45 PM File system (NTFS) open has failed or the file system is not supported. Source file: DriveBackupitemtree.cpp, Line: 1310 07:57:45 PM Geometry of \\.\PHYSICALDRIVE1, Cylinders: 30377, MediaType: 12, TracksPerCylinder: 255, SectorsPerTrack: 63, BytesPerSector: 512, Heads: 0, Disk Number: 1, Start Block Offset: 0 Source file: DriveAccessNT.cpp, Line: 210 07:59:07 PM [Backup Process] 07:59:07 PM Microsoft Windows XP 07:59:07 PM Backup name: cdrive_jan_24_2007_blewis_Disk 0 07:59:07 PM Created by: blewis 07:59:07 PM LOG creation date: 2007/01/24 07:59:07 PM Reading source path information using (Files excluded for all backups) filter profile. This process may take several minutes. Source file: BackupDocBase.cpp, Line: 469 08:03:32 PM Calculation of CRC for files has been started. Source file: DriveBackupDocBase.cpp, Line: 3796 08:04:32 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Crypto\RSA\MachineKeys\0a7de90858b78fc973a8599931c2dc86_043f82dd-df10-4aa2-ab70-868a61d046c3) for reading has been failed. System error: (5) Access is denied. Source file: LBWinFile.cpp, Line: 107 08:04:32 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Crypto\RSA\MachineKeys\0fa5b96b116bab73cec3ffdd02ee4148_043f82dd-df10-4aa2-ab70-868a61d046c3) for reading has been failed. System error: (5) Access is denied. Source file: LBWinFile.cpp, Line: 107 08:04:33 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Crypto\RSA\MachineKeys\21affcbdcf6ad4944e2b7dc3c1c0ea03_043f82dd-df10-4aa2-ab70-868a61d046c3) for reading has been failed. System error: (5) Access is denied. Source file: LBWinFile.cpp, Line: 107 08:04:34 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Crypto\RSA\MachineKeys\4da8a2fcba54c0632f55320b40f0df86_043f82dd-df10-4aa2-ab70-868a61d046c3) for reading has been failed. System error: (5) Access is denied. Source file: LBWinFile.cpp, Line: 107 08:04:34 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Crypto\RSA\MachineKeys\660bac45d04ac0a98de0dbc5cd1d2090_043f82dd-df10-4aa2-ab70-868a61d046c3) for reading has been failed. System error: (5) Access is denied. Source file: LBWinFile.cpp, Line: 107 08:04:35 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Crypto\RSA\MachineKeys\a2f6d7b222392c36ada5c8296cb82a41_043f82dd-df10-4aa2-ab70-868a61d046c3) for reading has been failed. System error: (5) Access is denied. Source file: LBWinFile.cpp, Line: 107 08:04:35 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Crypto\RSA\MachineKeys\a640b85952536396138f94402379567d_043f82dd-df10-4aa2-ab70-868a61d046c3) for reading has been failed. System error: (5) Access is denied. Source file: LBWinFile.cpp, Line: 107 08:04:35 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Crypto\RSA\MachineKeys\dcbce04804bda66fa40d17ea43236d6b_043f82dd-df10-4aa2-ab70-868a61d046c3) for reading has been failed. System error: (5) Access is denied. Source file: LBWinFile.cpp, Line: 107 08:04:36 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Crypto\RSA\MachineKeys\e315e142cc8506a2e204983dbf76101f_043f82dd-df10-4aa2-ab70-868a61d046c3) for reading has been failed. System error: (5) Access is denied. Source file: LBWinFile.cpp, Line: 107 08:04:36 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Crypto\RSA\MachineKeys\f10164249a87a2cd1882446c6363ade3_043f82dd-df10-4aa2-ab70-868a61d046c3) for reading has been failed. System error: (5) Access is denied. Source file: LBWinFile.cpp, Line: 107 08:04:36 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Crypto\RSA\MachineKeys\f543deb558224841c2d33d2d82f6d809_043f82dd-df10-4aa2-ab70-868a61d046c3) for reading has been failed. System error: (5) Access is denied. Source file: LBWinFile.cpp, Line: 107 08:04:36 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Crypto\RSA\MachineKeys\f87dfc490c63c932d5f40c8d30c786a8_043f82dd-df10-4aa2-ab70-868a61d046c3) for reading has been failed. System error: (5) Access is denied. Source file: LBWinFile.cpp, Line: 107 08:04:37 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\GatherLogs\SystemIndex\SystemIndex.56.Crwl) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:04:37 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\GatherLogs\SystemIndex\SystemIndex.56.gthr) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:04:37 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\MSS.log) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:04:37 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\MSStmp.log) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:04:37 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\00010001.ci) for reading has been failed. System error: (2) The system cannot find the file specified. Source file: LBWinFile.cpp, Line: 107 08:04:37 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\00010001.dir) for reading has been failed. System error: (2) The system cannot find the file specified. Source file: LBWinFile.cpp, Line: 107 08:04:37 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\00010001.wid) for reading has been failed. System error: (2) The system cannot find the file specified. Source file: LBWinFile.cpp, Line: 107 08:04:37 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\00010002.wid) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:04:37 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\00010003.ci) for reading has been failed. System error: (2) The system cannot find the file specified. Source file: LBWinFile.cpp, Line: 107 08:04:37 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\00010003.dir) for reading has been failed. System error: (2) The system cannot find the file specified. Source file: LBWinFile.cpp, Line: 107 08:04:37 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\00010003.wid) for reading has been failed. System error: (2) The system cannot find the file specified. Source file: LBWinFile.cpp, Line: 107 08:04:37 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\00010004.ci) for reading has been failed. System error: (2) The system cannot find the file specified. Source file: LBWinFile.cpp, Line: 107 08:04:37 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\00010004.dir) for reading has been failed. System error: (2) The system cannot find the file specified. Source file: LBWinFile.cpp, Line: 107 08:04:37 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\00010004.wid) for reading has been failed. System error: (2) The system cannot find the file specified. Source file: LBWinFile.cpp, Line: 107 08:04:37 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\00010005.ci) for reading has been failed. System error: (2) The system cannot find the file specified. Source file: LBWinFile.cpp, Line: 107 08:04:37 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\00010005.dir) for reading has been failed. System error: (2) The system cannot find the file specified. Source file: LBWinFile.cpp, Line: 107 08:04:37 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\00010005.wid) for reading has been failed. System error: (2) The system cannot find the file specified. Source file: LBWinFile.cpp, Line: 107 08:04:37 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\00010006.ci) for reading has been failed. System error: (2) The system cannot find the file specified. Source file: LBWinFile.cpp, Line: 107 08:04:37 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\00010006.dir) for reading has been failed. System error: (2) The system cannot find the file specified. Source file: LBWinFile.cpp, Line: 107 08:04:37 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\00010006.wid) for reading has been failed. System error: (2) The system cannot find the file specified. Source file: LBWinFile.cpp, Line: 107 08:04:37 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\00010007.ci) for reading has been failed. System error: (2) The system cannot find the file specified. Source file: LBWinFile.cpp, Line: 107 08:04:37 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\00010007.dir) for reading has been failed. System error: (2) The system cannot find the file specified. Source file: LBWinFile.cpp, Line: 107 08:04:37 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\00010007.wid) for reading has been failed. System error: (2) The system cannot find the file specified. Source file: LBWinFile.cpp, Line: 107 08:04:37 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\00010008.wid) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:04:37 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\00010009.wid) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:04:37 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\0001000A.ci) for reading has been failed. System error: (2) The system cannot find the file specified. Source file: LBWinFile.cpp, Line: 107 08:04:37 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\0001000A.dir) for reading has been failed. System error: (2) The system cannot find the file specified. Source file: LBWinFile.cpp, Line: 107 08:04:37 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\0001000A.wid) for reading has been failed. System error: (2) The system cannot find the file specified. Source file: LBWinFile.cpp, Line: 107 08:04:37 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\0001000B.ci) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:04:38 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\0001000B.wid) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:04:38 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\0001000B.wsb) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:04:38 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\0001000C.wid) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:04:38 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\0001000D.ci) for reading has been failed. System error: (2) The system cannot find the file specified. Source file: LBWinFile.cpp, Line: 107 08:04:38 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\0001000D.dir) for reading has been failed. System error: (2) The system cannot find the file specified. Source file: LBWinFile.cpp, Line: 107 08:04:38 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\0001000D.wid) for reading has been failed. System error: (2) The system cannot find the file specified. Source file: LBWinFile.cpp, Line: 107 08:04:38 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\00010011.ci) for reading has been failed. System error: (2) The system cannot find the file specified. Source file: LBWinFile.cpp, Line: 107 08:04:38 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\00010011.dir) for reading has been failed. System error: (2) The system cannot find the file specified. Source file: LBWinFile.cpp, Line: 107 08:04:38 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\00010011.wid) for reading has been failed. System error: (2) The system cannot find the file specified. Source file: LBWinFile.cpp, Line: 107 08:04:38 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\00010012.wid) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:04:38 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\00010013.wid) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:04:38 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\00010014.ci) for reading has been failed. System error: (2) The system cannot find the file specified. Source file: LBWinFile.cpp, Line: 107 08:04:38 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\00010014.dir) for reading has been failed. System error: (2) The system cannot find the file specified. Source file: LBWinFile.cpp, Line: 107 08:04:38 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\00010014.wid) for reading has been failed. System error: (2) The system cannot find the file specified. Source file: LBWinFile.cpp, Line: 107 08:04:38 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\00010016.ci) for reading has been failed. System error: (2) The system cannot find the file specified. Source file: LBWinFile.cpp, Line: 107 08:04:38 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\00010016.dir) for reading has been failed. System error: (2) The system cannot find the file specified. Source file: LBWinFile.cpp, Line: 107 08:04:38 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\00010016.wid) for reading has been failed. System error: (2) The system cannot find the file specified. Source file: LBWinFile.cpp, Line: 107 08:04:38 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\00010017.wid) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:04:38 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\00010018.ci) for reading has been failed. System error: (2) The system cannot find the file specified. Source file: LBWinFile.cpp, Line: 107 08:04:38 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\00010018.dir) for reading has been failed. System error: (2) The system cannot find the file specified. Source file: LBWinFile.cpp, Line: 107 08:04:38 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\00010018.wid) for reading has been failed. System error: (2) The system cannot find the file specified. Source file: LBWinFile.cpp, Line: 107 08:04:38 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\0001001A.wid) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:04:38 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\0001001B.ci) for reading has been failed. System error: (2) The system cannot find the file specified. Source file: LBWinFile.cpp, Line: 107 08:04:38 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\0001001B.dir) for reading has been failed. System error: (2) The system cannot find the file specified. Source file: LBWinFile.cpp, Line: 107 08:04:38 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\0001001B.wid) for reading has been failed. System error: (2) The system cannot find the file specified. Source file: LBWinFile.cpp, Line: 107 08:04:38 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\0001001C.ci) for reading has been failed. System error: (2) The system cannot find the file specified. Source file: LBWinFile.cpp, Line: 107 08:04:38 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\0001001C.dir) for reading has been failed. System error: (2) The system cannot find the file specified. Source file: LBWinFile.cpp, Line: 107 08:04:38 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\0001001C.wid) for reading has been failed. System error: (2) The system cannot find the file specified. Source file: LBWinFile.cpp, Line: 107 08:04:38 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\0001001D.wid) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:04:38 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\0001001F.wid) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:04:38 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\00010020.ci) for reading has been failed. System error: (2) The system cannot find the file specified. Source file: LBWinFile.cpp, Line: 107 08:04:38 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\00010020.dir) for reading has been failed. System error: (2) The system cannot find the file specified. Source file: LBWinFile.cpp, Line: 107 08:04:38 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\00010020.wid) for reading has been failed. System error: (2) The system cannot find the file specified. Source file: LBWinFile.cpp, Line: 107 08:04:38 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\00010027.ci) for reading has been failed. System error: (2) The system cannot find the file specified. Source file: LBWinFile.cpp, Line: 107 08:04:38 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\00010027.dir) for reading has been failed. System error: (2) The system cannot find the file specified. Source file: LBWinFile.cpp, Line: 107 08:04:38 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\00010027.wid) for reading has been failed. System error: (2) The system cannot find the file specified. Source file: LBWinFile.cpp, Line: 107 08:04:38 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\00010028.wid) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:04:38 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\0001002A.wid) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:04:38 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\INDEX.000) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:04:38 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\PropMap\CiPT0000.000) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:04:38 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\PropMap\Used0000.000) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:04:38 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\SecStore\CiST0000.000) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:04:38 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\SystemIndex.chk1.gthr) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:04:38 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\SystemIndex.chk2.gthr) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:04:38 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\SystemIndex.Ntfy74.gthr) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:04:38 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\tmp.edb) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:04:39 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Applications\Windows\Windows.edb) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:04:39 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Temp\usgthrsvc\Ntf3.tmp) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:04:39 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Temp\usgthrsvc\Ntf4.tmp) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:04:39 PM Open file/folder (C:\Documents and Settings\All Users.WINJUL23\Application Data\Microsoft\Search\Data\Temp\usgthrsvc\Perflib_Perfdata_cdc.dat) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:04:51 PM Open file/folder (C:\Documents and Settings\blewis.IMN-0\Application Data\$_hpcst$.hpc) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:04:52 PM Open file/folder (C:\Documents and Settings\blewis.IMN-0\Application Data\Ahead\Nero BackItUp\Cache\BIU409.txt) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:20:24 PM Open file/folder (C:\Documents and Settings\blewis.IMN-0\Application Data\ispnews\ispn.ini) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:20:24 PM Open file/folder (C:\Documents and Settings\blewis.IMN-0\Application Data\ispnews\ispnc.items) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:20:24 PM Open file/folder (C:\Documents and Settings\blewis.IMN-0\Application Data\ispnews\ispnr.items) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:20:29 PM Open file/folder (C:\Documents and Settings\blewis.IMN-0\Application Data\Microsoft\Outlook\outitems.log) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:20:29 PM Open file/folder (C:\Documents and Settings\blewis.IMN-0\Application Data\Microsoft\Outlook\Outlook.NK2) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:20:29 PM Open file/folder (C:\Documents and Settings\blewis.IMN-0\Application Data\Microsoft\Outlook\Outlook.srs) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:20:29 PM Open file/folder (C:\Documents and Settings\blewis.IMN-0\Application Data\Microsoft\Templates\NormalEmail.dotm) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:20:34 PM Open file/folder (C:\Documents and Settings\blewis.IMN-0\Application Data\Mozilla\Firefox\Profiles\rcwv8vrs.default\flashgot.log) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:20:34 PM Open file/folder (C:\Documents and Settings\blewis.IMN-0\Application Data\Mozilla\Firefox\Profiles\rcwv8vrs.default\formhistory.dat) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:20:34 PM Open file/folder (C:\Documents and Settings\blewis.IMN-0\Application Data\Mozilla\Firefox\Profiles\rcwv8vrs.default\history.dat) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:20:34 PM Open file/folder (C:\Documents and Settings\blewis.IMN-0\Application Data\Mozilla\Firefox\Profiles\rcwv8vrs.default\parent.lock) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:22:10 PM Open file/folder (C:\Documents and Settings\blewis.IMN-0\Cookies\index.dat) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:22:15 PM Open file/folder (C:\Documents and Settings\blewis.IMN-0\Local Settings\Application Data\Ahead\Nero Home\bl.db) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:22:15 PM Open file/folder (C:\Documents and Settings\blewis.IMN-0\Local Settings\Application Data\Ahead\Nero Home\is2.db) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:22:16 PM Open file/folder (C:\Documents and Settings\blewis.IMN-0\Local Settings\Application Data\Identities\{56E997DD-8A09-4E20-BCE2-41EEB024EEC4}\Microsoft\Outlook Express\Folders.dbx) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:22:21 PM Open file/folder (C:\Documents and Settings\blewis.IMN-0\Local Settings\Application Data\Identities\{56E997DD-8A09-4E20-BCE2-41EEB024EEC4}\Microsoft\Outlook Express\Offline.dbx) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:22:22 PM Open file/folder (C:\Documents and Settings\blewis.IMN-0\Local Settings\Application Data\Microsoft\Outlook\11oct2003 rwl personal folder.pst) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:23:03 PM Open file/folder (C:\Documents and Settings\blewis.IMN-0\Local Settings\Application Data\Microsoft\Outlook\Outlook.pst) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:23:03 PM Open file/folder (C:\Documents and Settings\blewis.IMN-0\Local Settings\Application Data\Microsoft\Outlook\~11oct2003 rwl personal folder.pst.tmp) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:23:03 PM Open file/folder (C:\Documents and Settings\blewis.IMN-0\Local Settings\Application Data\Microsoft\Outlook\~Outlook.pst.tmp) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:23:03 PM Open file/folder (C:\Documents and Settings\blewis.IMN-0\Local Settings\Application Data\Microsoft\Windows\UsrClass.dat) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:23:03 PM Open file/folder (C:\Documents and Settings\blewis.IMN-0\Local Settings\Application Data\Microsoft\Windows\UsrClass.dat.LOG) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:23:09 PM Open file/folder (C:\Documents and Settings\blewis.IMN-0\Local Settings\Application Data\Mozilla\Firefox\Profiles\rcwv8vrs.default\Cache\_CACHE_001_) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:23:09 PM Open file/folder (C:\Documents and Settings\blewis.IMN-0\Local Settings\Application Data\Mozilla\Firefox\Profiles\rcwv8vrs.default\Cache\_CACHE_002_) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:23:09 PM Open file/folder (C:\Documents and Settings\blewis.IMN-0\Local Settings\Application Data\Mozilla\Firefox\Profiles\rcwv8vrs.default\Cache\_CACHE_003_) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:23:09 PM Open file/folder (C:\Documents and Settings\blewis.IMN-0\Local Settings\Application Data\Mozilla\Firefox\Profiles\rcwv8vrs.default\Cache\_CACHE_MAP_) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:23:13 PM Open file/folder (C:\Documents and Settings\blewis.IMN-0\Local Settings\History\History.IE5\index.dat) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:23:47 PM Open file/folder (C:\Documents and Settings\blewis.IMN-0\Local Settings\Temp\WCESLog.log) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:23:50 PM Open file/folder (C:\Documents and Settings\blewis.IMN-0\Local Settings\Temp\~DF8AE1.tmp) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:23:50 PM Open file/folder (C:\Documents and Settings\blewis.IMN-0\Local Settings\Temp\~DF8AF1.tmp) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:26:49 PM Open file/folder (C:\Documents and Settings\blewis.IMN-0\Local Settings\Temporary Internet Files\Content.IE5\index.dat) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:29:21 PM Open file/folder (C:\Documents and Settings\blewis.IMN-0\Local Settings\Temporary Internet Files\Content.Word\~WRS{3E0CAA2E-A357-4ACD-9A26-B80AA9611F1E}.tmp) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:29:21 PM Open file/folder (C:\Documents and Settings\blewis.IMN-0\Local Settings\Temporary Internet Files\Content.Word\~WRS{60D79DB5-E21E-4D74-91E2-411450D201B1}.tmp) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:29:22 PM Open file/folder (C:\Documents and Settings\blewis.IMN-0\Local Settings\Temporary Internet Files\Content.Word\~WRS{70BA6C43-2D65-47F1-993E-80CCD8B401B2}.tmp) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:29:22 PM Open file/folder (C:\Documents and Settings\blewis.IMN-0\Local Settings\Temporary Internet Files\Content.Word\~WRS{B13441EC-72E1-4C57-A262-3ED452A6B28F}.tmp) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:29:22 PM Open file/folder (C:\Documents and Settings\blewis.IMN-0\Local Settings\Temporary Internet Files\Content.Word\~WRS{CDDFECCC-7F0F-4F1F-ADA9-EBB1B56F2C5C}.tmp) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:29:23 PM Open file/folder (C:\Documents and Settings\blewis.IMN-0\Local Settings\Temporary Internet Files\Content.Word\~WRS{E720DE13-9AEE-4AFF-88BC-E430063B3825}.tmp) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:29:23 PM Open file/folder (C:\Documents and Settings\blewis.IMN-0\Local Settings\Temporary Internet Files\Content.Word\~WRS{E76EC6B1-4876-4A63-87E5-8BD83335B35F}.tmp) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:29:51 PM Open file/folder (C:\Documents and Settings\blewis.IMN-0\ntuser.dat) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:29:51 PM Open file/folder (C:\Documents and Settings\blewis.IMN-0\ntuser.dat.LOG) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:30:09 PM Open file/folder (C:\Documents and Settings\LocalService.NT AUTHORITY\Application Data\Ahead\Nero BackItUp\Cache\NBService.log) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:30:10 PM Open file/folder (C:\Documents and Settings\LocalService.NT AUTHORITY\Cookies\index.dat) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:30:10 PM Open file/folder (C:\Documents and Settings\LocalService.NT AUTHORITY\Local Settings\Application Data\Microsoft\Windows\UsrClass.dat) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:30:10 PM Open file/folder (C:\Documents and Settings\LocalService.NT AUTHORITY\Local Settings\Application Data\Microsoft\Windows\UsrClass.dat.LOG) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:30:10 PM Open file/folder (C:\Documents and Settings\LocalService.NT AUTHORITY\Local Settings\History\History.IE5\index.dat) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:30:11 PM Open file/folder (C:\Documents and Settings\LocalService.NT AUTHORITY\Local Settings\Temporary Internet Files\Content.IE5\index.dat) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:30:11 PM Open file/folder (C:\Documents and Settings\LocalService.NT AUTHORITY\ntuser.dat) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:30:11 PM Open file/folder (C:\Documents and Settings\LocalService.NT AUTHORITY\ntuser.dat.LOG) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:30:11 PM Open file/folder (C:\Documents and Settings\NetworkService.NT AUTHORITY\Local Settings\Application Data\Microsoft\Windows\UsrClass.dat) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:30:11 PM Open file/folder (C:\Documents and Settings\NetworkService.NT AUTHORITY\Local Settings\Application Data\Microsoft\Windows\UsrClass.dat.LOG) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:30:12 PM Open file/folder (C:\Documents and Settings\NetworkService.NT AUTHORITY\NTUSER.DAT) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:30:12 PM Open file/folder (C:\Documents and Settings\NetworkService.NT AUTHORITY\ntuser.dat.LOG) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:30:28 PM Open file/folder (C:\LCDinfo\lcdinfo_test\log.txt) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:30:41 PM Open file/folder (C:\pedriver.txt) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:31:13 PM Open file/folder (C:\Program Files\Adaptec\Adaptec Storage Manager\RaidErr.log) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:31:13 PM Open file/folder (C:\Program Files\Adaptec\Adaptec Storage Manager\RaidErrA.log) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:32:02 PM Open file/folder (C:\Program Files\ASUS\Probe\Record\2007124) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:46:07 PM Open file/folder (C:\Program Files\National Instruments\MAX\Data\config3.mxd) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:46:07 PM Open file/folder (C:\Program Files\National Instruments\MAX\Data\config3.mxs) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:48:36 PM Open file/folder (C:\Program Files\Shaw Secure\Anti-Virus\dbupdate.log) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:48:39 PM Open file/folder (C:\Program Files\Shaw Secure\Anti-Virus\Qrt.log) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:48:53 PM Open file/folder (C:\Program Files\Shaw Secure\backweb\3875767\Users\Default\Data\cache.dat) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:48:53 PM Open file/folder (C:\Program Files\Shaw Secure\backweb\3875767\Users\Default\Data\chandir.dat) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:48:53 PM Open file/folder (C:\Program Files\Shaw Secure\backweb\3875767\Users\Default\Data\chandir.idx) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:48:53 PM Open file/folder (C:\Program Files\Shaw Secure\backweb\3875767\Users\Default\Data\chn.dat) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:48:53 PM Open file/folder (C:\Program Files\Shaw Secure\backweb\3875767\Users\Default\Data\chn.idx) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:48:53 PM Open file/folder (C:\Program Files\Shaw Secure\backweb\3875767\Users\Default\Data\D0000000.FCS) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:48:53 PM Open file/folder (C:\Program Files\Shaw Secure\backweb\3875767\Users\Default\Data\fsbwupst.log) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:48:53 PM Open file/folder (C:\Program Files\Shaw Secure\backweb\3875767\Users\Default\Data\inuse.txt) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:48:53 PM Open file/folder (C:\Program Files\Shaw Secure\backweb\3875767\Users\Default\Data\L0000004.FCS) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:48:53 PM Open file/folder (C:\Program Files\Shaw Secure\backweb\3875767\Users\Default\Data\main.log) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:48:53 PM Open file/folder (C:\Program Files\Shaw Secure\backweb\3875767\Users\Default\Data\prs.dat) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:48:53 PM Open file/folder (C:\Program Files\Shaw Secure\backweb\3875767\Users\Default\Data\prs.idx) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:48:53 PM Open file/folder (C:\Program Files\Shaw Secure\backweb\3875767\Users\Default\Data\prs_die.dat) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:48:53 PM Open file/folder (C:\Program Files\Shaw Secure\backweb\3875767\Users\Default\Data\prs_die.idx) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:48:53 PM Open file/folder (C:\Program Files\Shaw Secure\backweb\3875767\Users\Default\Data\prs_dnd.dat) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:48:53 PM Open file/folder (C:\Program Files\Shaw Secure\backweb\3875767\Users\Default\Data\prs_dnd.idx) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:48:53 PM Open file/folder (C:\Program Files\Shaw Secure\backweb\3875767\Users\Default\Data\prs_ext.dat) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:48:53 PM Open file/folder (C:\Program Files\Shaw Secure\backweb\3875767\Users\Default\Data\prs_ext.idx) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:48:53 PM Open file/folder (C:\Program Files\Shaw Secure\backweb\3875767\Users\Default\Data\prs_rcv.dat) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:48:53 PM Open file/folder (C:\Program Files\Shaw Secure\backweb\3875767\Users\Default\Data\prs_rcv.idx) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:48:53 PM Open file/folder (C:\Program Files\Shaw Secure\backweb\3875767\Users\Default\Data\storydb.dat) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:48:53 PM Open file/folder (C:\Program Files\Shaw Secure\backweb\3875767\Users\Default\Data\storydb.idx) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:48:53 PM Open file/folder (C:\Program Files\Shaw Secure\Common\admin.pub) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:48:57 PM Open file/folder (C:\Program Files\Shaw Secure\Common\policy.bpf) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:48:57 PM Open file/folder (C:\Program Files\Shaw Secure\Common\policy.ipf) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:49:16 PM Open file/folder (C:\Program Files\Shaw Secure\Spam Control\log\fs_sa_log.txt) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 08:59:06 PM Open file/folder (C:\WINJUL23\rnapxs\rnapxs.dat) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 09:00:26 PM Open file/folder (C:\WINJUL23\Sti_Trace.log) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 09:00:41 PM Open file/folder (C:\WINJUL23\system32\config\ACEEvent.evt) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 09:00:41 PM Open file/folder (C:\WINJUL23\system32\config\AppEvent.Evt) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 09:00:41 PM Open file/folder (C:\WINJUL23\system32\config\default) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 09:00:41 PM Open file/folder (C:\WINJUL23\system32\config\default.LOG) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 09:00:41 PM Open file/folder (C:\WINJUL23\system32\config\ODiag.evt) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 09:00:41 PM Open file/folder (C:\WINJUL23\system32\config\OSession.evt) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 09:00:41 PM Open file/folder (C:\WINJUL23\system32\config\SAM) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 09:00:41 PM Open file/folder (C:\WINJUL23\system32\config\SAM.LOG) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 09:00:42 PM Open file/folder (C:\WINJUL23\system32\config\SecEvent.Evt) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 09:00:42 PM Open file/folder (C:\WINJUL23\system32\config\SECURITY) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 09:00:42 PM Open file/folder (C:\WINJUL23\system32\config\SECURITY.LOG) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 09:00:42 PM Open file/folder (C:\WINJUL23\system32\config\software) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 09:00:42 PM Open file/folder (C:\WINJUL23\system32\config\software.LOG) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 09:00:44 PM Open file/folder (C:\WINJUL23\system32\config\SysEvent.Evt) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 09:00:44 PM Open file/folder (C:\WINJUL23\system32\config\system) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 09:00:44 PM Open file/folder (C:\WINJUL23\system32\config\system.LOG) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 09:01:51 PM Open file/folder (C:\WINJUL23\system32\h323log.txt) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 09:03:25 PM Open file/folder (C:\WINJUL23\system32\wbem\Repository\FS\INDEX.BTR) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 09:03:25 PM Open file/folder (C:\WINJUL23\system32\wbem\Repository\FS\INDEX.MAP) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 09:03:25 PM Open file/folder (C:\WINJUL23\system32\wbem\Repository\FS\MAPPING.VER) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 09:03:26 PM Open file/folder (C:\WINJUL23\system32\wbem\Repository\FS\MAPPING1.MAP) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 09:03:26 PM Open file/folder (C:\WINJUL23\system32\wbem\Repository\FS\MAPPING2.MAP) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 09:03:26 PM Open file/folder (C:\WINJUL23\system32\wbem\Repository\FS\OBJECTS.DATA) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 09:03:26 PM Open file/folder (C:\WINJUL23\system32\wbem\Repository\FS\OBJECTS.MAP) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 09:03:39 PM Open file/folder (C:\WINJUL23\Temp\hsperfdata_SYSTEM\2012) for reading has been failed. System error: (5) Access is denied. Source file: LBWinFile.cpp, Line: 107 09:03:45 PM Open file/folder (C:\WINJUL23\wiadebug.log) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 09:03:45 PM Open file/folder (C:\WINJUL23\wiaservc.log) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 09:03:45 PM Open file/folder (C:\WINJUL23\WindowsUpdate.log) for reading has been failed. System error: (32) The process cannot access the file because it is being used by another process. Source file: LBWinFile.cpp, Line: 107 09:03:50 PM Calculation of CRC for files has completed successfully. Source file: DriveBackupDocBase.cpp, Line: 3814 09:03:50 PM Full backup operation started. Source file: DriveBackupDocBase.cpp, Line: 2673 09:03:50 PM User selected path list is used 09:03:50 PM Folders: 0, Files: 0, Data size: 0 09:03:50 PM Compression: On, Level: 2, Encryption: Off, Verification: On, Virus scan: Off 09:03:50 PM Backup type: 4, Direct compression: Off, New format backup: On 09:03:50 PM Source medium type : HDD 09:03:50 PM Target medium type : Disc 09:03:50 PM Disk number: 0, Partition number: -1, Drive letter: Disk 0, Drive label: Disk 0 09:03:50 PM Flags: 0x000000c1, Last used sector number: -1, Partition status: 0x00, Partition type: Unformatted 09:03:50 PM Actual size: 119858780160, Compress size: 119858747904, Sectors: 234099180, Start sector: 0, End sector: 234099180 Source file: DriveBackupDocBase.cpp, Line: 312 09:03:50 PM Start using Nero BackItUp own hard disk interfaces for this drive backup!!! Source file: DriveBackupDocBase.cpp, Line: 327 09:03:50 PM Geometry of \\.\PHYSICALDRIVE0, Cylinders: 14572, MediaType: 12, TracksPerCylinder: 255, SectorsPerTrack: 63, BytesPerSector: 512, Heads: 0, Disk Number: 0, Start Block Offset: 0 Source file: DriveAccessNT.cpp, Line: 210 09:03:50 PM Wrong Partition End. (Start Sector: 0, First Sector: 63, Sectors: 234420417, HD Sectors: 234099180) Source file: HDReaderFactory.cpp, Line: 445 09:03:50 PM Partition Entry = 1 09:03:50 PM Start sector = 63 09:03:50 PM Number of sectors = 234099117 09:03:50 PM Root source = 0 09:03:50 PM Number in chain = 0 09:03:50 PM Partition type = 0x07 09:03:50 PM Extended flag = 0 09:03:50 PM Partition status = 0x80 Source file: HDReaderFactory.cpp, Line: 323 09:03:50 PM Hard disk: 0. Result: 6. Message: Scanned successfully. Source file: HDReaderFactory.cpp, Line: 71 09:04:06 PM Nero BackItUp cannot lock the selected partition/hard disk because it is being used by another program. It is recommended that it is locked otherwise you may not get a fully consistent backup. If you intend to backup a system partition that is being used by a Windows operating system, it cannot be locked. If this is the case, click Ignore to continue without locking. Click Retry to try to lock again or Abort to cancel the process. Source file: DriveBackupCompilation.cpp, Line: 1560 09:10:53 PM The drive cannot be locked. IGNORE and to continue without locking. Source file: DriveBackupCompilation.cpp, Line: 1568 09:10:53 PM Space available for backup: 4679401472 Source file: BackupDocBase.cpp, Line: 3984 09:10:53 PM Drive backup ini file is not available on disc. A new file will be created. Source file: DriveBackupDocBase.cpp, Line: 1118 09:11:01 PM Burn speed: 0 KB, Disc type: 0x00002008, Write flags: 0x000003cc Source file: NeroInterfaceImpl.cpp, Line: 1268 09:11:01 PM Caching of files started 09:11:01 PM Caching of files completed 09:11:02 PM Burn process started at 16x (22,160 KB/s) 09:11:06 PM Error while reading sector no: 63 from drive: \\.\PHYSICALDRIVE0, start sector: 0, size: 0 sectors, system error: 87. Source file: DriveAccessNT.cpp, Line: 498 09:11:06 PM Assert Failed!!! Source file: UsedSectorFile.cpp, Line: 332 09:11:06 PM Read error!!! Source file: UsedSectorFile.cpp, Line: 333 09:11:06 PM Hard disk data read error without compression!!! Source file: DriveBackupCompilation.cpp, Line: 1866 09:11:06 PM The parameter is incorrect. 09:11:06 PM Error reading data 09:11:06 PM Illegal disc D: TSSTcorp CD/DVDW SH-S182D 09:11:06 PM Could not perform end of Disc-at-once 09:11:06 PM Burn process failed at 16x (22,160 KB/s) 09:11:06 PM NEROAPI_BURN_FAILED Source file: NeroInterfaceImpl.cpp, Line: 1278 =================================================================== 1C82-0010-8011-0000-9917-2783-**** Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero API version: 7.5.9.0 Using interface version: 7.5.0.0 Installed in: C:\Program Files\Nero\Nero 7\Nero BackItUp\NeroFiles\ Application: Nero\Nero BackItUp Internal Version: 7, 5, 9, 0 Recorder: <TSSTcorp CD/DVDW SH-S182D>Version: SB02 - HA 1 TA 0 - 7.5.9.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === CdRomPeripheral : TSSTcorp CD/DVDW SH-S182D atapi Port 0 ID 0 DMA: On DiskPeripheral : ADAPTEC RAID 1 1.0 aar81xx Port 2 ID 11 DMA: Off DiskPeripheral : SAMSUNG SP2504C VT10 aar81xx Port 2 ID 12 DMA: Off OtherPeripheral : ADAPTEC HostRAID 1.0 aar81xx Port 2 ID 126DMA: Off === CDRom-Device-Map === TSSTcorp CD/DVDW SH-S182D D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 1023MB (1047772kB) Free physical memory: 208MB (213400kB) Memory in use : 79 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 24.1.2007 NeroAPI 9:11:01 PM #1 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 9:11:01 PM #2 Text 0 File AudioCompilationImpl.cpp, Line 838 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 9:11:01 PM #3 ISO9660GEN -11 File Geniso.cpp, Line 3332 First writeable address = 0 (0x00000000) 9:11:01 PM #4 Text 0 File Burncd.cpp, Line 3451 Turn on Disc-At-Once, using DVD media 9:11:01 PM #5 Text 0 File DlgWaitCD.cpp, Line 306 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2285071 (507:47.46, 4463MB) 9:11:01 PM #6 Text 0 File DlgWaitCD.cpp, Line 318 Write in overburning mode: NO 9:11:01 PM #7 Text 0 File DlgWaitCD.cpp, Line 2903 Recorder: TSSTcorp CD/DVDW SH-S182D, Media type: DVD+R Disc Manufacturer ID: DAXON, Media Type ID: AZ3, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 7 9:11:01 PM #8 Text 0 File DlgWaitCD.cpp, Line 490 >>> Protocol of DlgWaitCD activities: <<< ========================================= 9:11:01 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 821 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2285072 (2285072) = #2285072/507:47.47 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2285072 blocks [D: TSSTcorp CD/DVDW SH-S182D] -------------------------------------------------------------- 9:11:01 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1024 Prepare [D: TSSTcorp CD/DVDW SH-S182D] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4679827456, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 2285072 | 0 | 0x00 0 | 1 | 1 | 0x41 | 2285072 | 0 | 0x00 2285072 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 9:11:01 PM #11 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 9:11:01 PM #12 Phase 24 File APIProgress.cpp, Line 282 Caching of files started 9:11:01 PM #13 Text 0 File Burncd.cpp, Line 4278 Cache writing successful. 9:11:01 PM #14 Phase 25 File APIProgress.cpp, Line 282 Caching of files completed 9:11:01 PM #15 Phase 36 File APIProgress.cpp, Line 282 Burn process started at 16x (22,160 KB/s) 9:11:04 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2743 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 9:11:04 PM #17 Text 0 File Cdrdrv.cpp, Line 9234 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: DAXON... Media type ID: AZ3 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 07 44 41 58 4F 4E - 00 00 00 41 5A 33 00 38 ...DAXON...AZ3.8 23 54 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 #T.............. 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 9:11:04 PM #18 Text 0 File DVDPlusRW.cpp, Line 674 Start write address at LBA 0 DVD high compatibility mode: No 9:11:06 PM #19 TRANSFER 4 File TransferWriteFileItem.cpp, Line 168 The parameter is incorrect. 9:11:06 PM #20 TRANSFER -25 File Reader.cpp, Line 379 Error reading data 9:11:06 PM #21 Text 0 File Reader.cpp, Line 382 Exception value: -1 9:11:06 PM #22 SPTI -1046 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x06 CDB Data: 0x5B 01 06 00 00 00 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 06 9:11:06 PM #23 CDR -1046 File WriterStatus.cpp, Line 162 Illegal disc D: TSSTcorp CD/DVDW SH-S182D 9:11:06 PM #24 TRANSFER -24 File WriterStatus.cpp, Line 162 Could not perform end of Disc-at-once 9:11:06 PM #25 Phase 38 File APIProgress.cpp, Line 282 Burn process failed at 16x (22,160 KB/s) 9:11:06 PM #26 Text 0 File AudioCompilationImpl.cpp, Line 863 DRM: DRM burn session terminated. 9:11:06 PM #27 Text 0 File AudioCompilationImpl.cpp, Line 892 DRM: Closing entire DRM handling. Bye. 9:11:06 PM #28 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 9:11:06 PM #29 Text 0 File Cdrdrv.cpp, Line 10467 DriveLocker: UnLockVolume completed 9:11:06 PM #30 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: File 'Drivers\GIVEIO.SYS': Ver=?.?.?.?, size=5248 bytes, created 4/3/1996 9:33:26 PM (Power saving: VCool probably installed) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) =================================================================== 09:11:06 PM BurnOnDisc returned false!!! Source file: DriveBackupDocBase.cpp, Line: 2134 09:11:10 PM Backup process failed. Source file: DriveBackupDocBase.cpp, Line: 538
I do not use Nero Backit Up, because it only will backup data and does not make an image of your HDD. If you want an image for recovery you need another program such as Norton Ghost or Acronis. I use Acronis and for image of the OS, you can then use Nero Backit Up to return you data to your HDD as long as you have Nero installed.
Thank you for the advise. But Nero supposedly has an image backup, does this not work and is there no way to make it work?
I have a very simular problem. I purchased the new Aopen DVD 18x drive bundled with Nero 7 Essentials for the expressed purposed of being able to back up and restore my system.......so I thought. After removing all other CD/DVD software and a couple times of using Nero Cleaning tools and installing their latest update, I finally was able to copy my C: drive partition using BackitUp 2 and thought great, not I can boot from this DVD as it was a partition copy of my boot drive, right....wrong. The DVD will not boot. Next I thought maybe I can then use the "Create Bootable Disc" feature to at least create a bootable CD using Nero 7 so I can then restore my recently copied drive C: partition.....again failure. The tool to Create Bootable Disc continually fails with an error saying it cannot fine the image files, and it does not bother to tell you what files or folder it is looking for and no log of the action. I have been trying to contact Nero technical support for over a month now with no success, someone named Dan responed the first time and asked for an attachment of the log file for the partition copy which I provided and I still have not received any reponse concerning the failure of the program to find the needed files to Create Bootable Disc. This has been my first encounter with a Nero product, and it will most likely be my last. Unfortunately, 30 days has now passed and I am unable to return the product for a refund. If anyone can help resolve the problem with the Create Bootable Disc, I would appreciate it. What folder or files is it looking for ? I suspect the Nero installation has put some files in the wrong place. I also noticed after unzipping the BackitUp_ImageTool to the correct folder under the Nero BackitUp folder, there are still some files that are zipped. I just assume the program will unzip them as needed ? or should they be manually unzipped....sure wish their technical support would make some reasonable effort to support their product..........sigh
I have had exactly the same experience with Nero support. Usually all I get is canned email faq's generated by a automated system. I have sent log after log since version 5 for various problems and each follow up on a service request is by a different person via email sending a canned response. The questions are never answered even though I clearly number the like 1). 2)... etc. Therefore nothing is resoloved except when you can get help on the forums or figure it out on your own. What I have been told twice on the forum is to use Acronis for image backup (by other users) but not to use Nero for image backups. I don't know if this is just a narrow personal experience or whether it is common knowledge. So why use Nero... Nero works great for file backups but not image backups; yet why do they have the program if it does work, and why do they market it as an image backup!!! This seems like mail fraud to me. But be warned, my brother (on my advise based on the forum comments) just bought Acronis workstation 9.1 and he can't get it to do an image backup either. First he buys the program, it doesn't work, and then was told he had to by support to get any support at all. This was the next day after the purchase. So why use it? We urgently need a backup and so far nothing works. But after paying for support he is working with a person and there is some hope this will be resolved. What I am starting to look into is the SourceForge projects like BackUpPC. These are enterprise solutions that backup and restore anything and it does scheduled incremental backups and it definitely works, it is used all around the world. The problem is the support and getting it set up. And what I don't know yet is if it will work just on a single workstation. I am guessing it will because it is a client server model but I have to find out. There are other options like Norton Ghost that is supposed to work but I don't know if that will backup to DVD. This is what we need. Regarding your boot disk and Nero. I had the exact same problem with V7.0.??? it could not find the files to create the boot dis, but I just upgraded to V7.7.?? and the boot disk is now created correctly. However I can't make a set of disks of the C drive inorder to use the boot disk to restore. I haven't tried using the boot disk to build the image (I can't remember if it will do this, I think it will). This may overcome vagarities with windows layers because it would have just a very simple dos OS. I booted the boot disk and it did boot correctly however. So I hope this will help you. Keep in contact and I will let you know what I find out even apart from Nero if you want. Just email me directly. Good luck... because we can't depend on either the product or support... Robert
Thanks for the heads up about the new update 7.7.5.1 that came out. I have been using 7.5.9.0 update which I installed only a couple weeks ago. So anyway, I downloaded the new update and it appears they have fixed some of the problems I was seeing. I was able to Create Bootable Disc now on a CD and it did in fact boot to their BackitUp system. I also tried to burn my Drive G: partition, about 2.35 GB with sucess and they are now puting the boot files automaticly on the DVD. I then wiped (after saving) my Drive G: partition, booted from the burned DVD copy and it put it all back ok. Only problem I seen was it would not let me write the log to my floppy drive. Now I tried to burn my Drive C: (boot) partition and it failed the first time. I am using Memorex 16x DVD+R media. The failure indicated a write error to media. So I trashed that DVD and tried a new one, this time I set my burn speed to 12x. It took a total of 40 mins to burn and verify at 12x for 4.0 GBs. But it made a sucessful copy this time. Now I just need to hook up my old hard disk and try to restore the C: partition to it to see if in fact I can restore the backup. Hope to try that in a few days, don't feel like tearing my computer open tonight. Anyway the new update does appear to be working now for the BackitUp 2 and restore. Cheers
"I finally was able to copy my C: drive partition using BackitUp 2 and thought great, not I can boot from this DVD as it was a partition copy of my boot drive, right....wrong. The DVD will not boot." Windows XP cannot boot from a DVD, only from a hard disk. One exception is BartPE, which is precisely a Windows XP which boots from a CD. If you create an image and burn it to a DVD, to boot from it you must restore the image to the hard disk. This operation destroys all information in the restored partitions, so if it fails, the system will become unbootable.
I am glad this is working out better for you to the point you may be able to get an image backup to work. But for me, further to the above mess, I bought Norton Save and Restore. I can definitely recommend that NO ONE buy this product. It didn't work and the support is abysimal. If you want to get phone support you have to pay more for an incident then the product or... you can use their online support. Charming...which is basically a half to hone hour wait in a chat window then a few trival suggestions to which in my case they did not even pay attention to my questions or answers and the finally .... um, er, um ...ahh, remove and re-install and then go back wait in the queue for another online connection for about an hour. Then, after you get re-connected, you get to be mulitasked by some one in India servicing about 10 people with the above trouble shooting procedure. No racial slur is meant, but everything seems to be farmed out for the lowest bidder and therefore lowest quality. But I did learn something in trying to get BartPE working, I don't think the SataRaid drivers are being loaded by either Acronis, Nero or Save and Restore. So if I am going to debug this at a driver level I will do it with freeware software. BartPE, driveImage_XML and Cobian backup. I will see if I can get this to work and drop everyone a line. Maybe it is too late and I am unusually ticked off, but I am fed up with the mail fraud advertising that wastes days of my time using professional web site adverts and sub standard products. Acronis, Nero and Norton's Save and Restore all said they worked with sata drives, raid configurations and just point and click to make image backups. Not one of them worked and none of them have software support that is worthy of the name. Acronis is working with my brother on his system after he purchased the $16 support license (not an unreasonable amount), but it doesn't work at present and they are still debugging. So if you factor in your time at $100/hr lost, these $100 products end up costing $1K's of dollars. Robert Robert
Sorry you are still having problems Robert. I am using just standard PATA hard drives so can't comment on the difficulty you are having. Anyway, today I opened up my comp and installed an older 40GB hard drive to test the BackitUP2 partition image restore. The bootable Nero DVD I made the other day, booted just fine. Looks like they are using a Linux kernel for the OS. I was able to restore my Drive C: partition image and Master Boot Record (MBR) with no problems other than some file verify errors related to the Nero stuff, which is expected as files are changing. Reset my BIOS to boot from the HHD0 and up came my Windows XP and everything looked like it was there. I was also this time able to write the log file out to floppy disk this time, the interface actually was not very intuitive, but finally succeeded. So at this point I feel Nero has fixed the problems I was having in their new update version 7.7.5.1, and now I feel more secure that I can indeed backup a drive partition and restore it with Nero 7. I hope you can get your problem resolved too.