BD RB Beta released! - now at version 0.37.08 (April 23rd, 2011)

im have a problem now with clerks 2
-----------------------
[20:59:41] BD Rebuilder v0.33.06 (beta)
- Source: CLERKS_2_D1_BD
- Input BD size: 33.19 GB
- Approximate total content: [02:42:48.633]
- Target BD size: 22.90 GB
- Windows Version: 6.0 [6002]
- One Pass ABR Mode enabled
- Audio Settings: AC3=1 DTS=1 HD=0 Kbs=640
[20:59:48] PHASE ONE, Encoding
- [20:59:48] Extracting A/V streams [VID_00007]
- [21:00:06] Reencoding: VID_00007 (1 of 7)
- [21:00:06] Collecting video information
- Source Video: VC-1, 1920x1080
- Rate/Length: 29.970fps, 2,098 frames
- [21:00:06] Reencoding: VID_00007, Pass 1 of 1
- [21:01:21] Video Encode complete
- [21:01:21] Reencoding audio tracks (if req'd)
- [21:01:22] Multiplexing M2TS
- [21:01:25] Extracting A/V streams [VID_00009]
- [21:01:52] Reencoding: VID_00009 (2 of 7)
- [21:01:52] Collecting video information
- Source Video: VC-1, 1920x1080
- Rate/Length: 29.970fps, 3,350 frames
- [21:01:52] Reencoding: VID_00009, Pass 1 of 1
- [21:03:40] Video Encode complete
- [21:03:40] Reencoding audio tracks (if req'd)
- [21:03:41] Multiplexing M2TS
- [21:03:46] Extracting A/V streams [VID_00012]
- [21:04:52] Reencoding: VID_00012 (3 of 7)
- [21:04:52] Collecting video information
- Source Video: VC-1, 1920x1080
- Rate/Length: 29.970fps, 8,348 frames
- [21:04:52] Reencoding: VID_00012, Pass 1 of 1
- [21:09:14] Video Encode complete
- [21:09:14] Reencoding audio tracks (if req'd)
- [21:09:16] Multiplexing M2TS
- [21:09:27] Extracting A/V streams [VID_00002]
- [21:11:30] Reencoding: VID_00002 (4 of 7)
- [21:11:30] Collecting video information
- Source Video: VC-1, 1920x1080
- Rate/Length: 29.970fps, 16,124 frames
- [21:11:30] Reencoding: VID_00002, Pass 1 of 1
- [21:19:48] Video Encode complete
- [21:19:48] Reencoding audio tracks (if req'd)
- [21:19:52] Multiplexing M2TS
- [21:20:31] Extracting A/V streams [VID_00011]
- [21:23:55] Reencoding: VID_00011 (5 of 7)
- [21:23:55] Collecting video information
- Source Video: VC-1, 1920x1080
- Rate/Length: 29.970fps, 21,697 frames
- [21:23:57] Reencoding: VID_00011, Pass 1 of 1
- [21:35:58] Video Encode complete
- [21:35:58] Reencoding audio tracks (if req'd)
- [21:35:58] Multiplexing M2TS
- [21:38:15] Extracting A/V streams [VID_00010]
- [21:47:57] Reencoding: VID_00010 (6 of 7)
- [21:47:57] Collecting video information
- Source Video: VC-1, 1920x1080
- Rate/Length: 29.970fps, 65,708 frames
- Bitrate: 14,489 Kbs
- [21:47:58] Reencoding: VID_00010, Pass 1 of 1
- [22:23:25] Video Encode complete
- [22:23:25] Reencoding audio tracks (if req'd)
- [22:23:39] Multiplexing M2TS
- [22:26:14] Extracting A/V streams [VID_00000]
- [22:32:41] Reencoding: VID_00000 (7 of 7)
- [22:32:41] Collecting video information
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 140,353 frames
- Bitrate: 18,404 Kbs
- [22:32:41] Reencoding: VID_00000, Pass 1 of 1

it just hangs there frames:065700 / 065708

 

wakko709

What concerns me is this hanging because it has all the mark of a Hardware issue. Try checking your processors heat during the re-encode.

 

I can not get Gran Torino to copy. I have tried it as full backup and movie only. Can this movie be copied?

-----------------------
[17:04:45] BD Rebuilder v0.33.06 (beta)
- Source: GRAN_TORINO
- Input BD size: 31.16 GB
- Approximate total content: [02:41:00.617]
- Target BD size: 22.66 GB
- Windows Version: 6.1 [7600]
- One Pass ABR Mode enabled
- Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640
[17:04:45] PHASE ONE, Encoding
- [17:04:45] Extracting A/V streams [VID_00009]
- [17:05:03] Reencoding: VID_00009 (1 of 6)
- [17:05:03] Collecting video information
- Source Video: VC-1, 1920x1080
- Rate/Length: 23.976fps, 2,483 frames
- [17:05:03] Reencoding: VID_00009, Pass 1 of 1
- Encode failed. Retrying.
- Encode failed. Retrying.
- Reached retry limit. Aborting.
- BD-Rebuilder v0.33.06 (beta)
- Windows Version: 6.1 [7600]
- AVISYNTH Version: 2.5.7.0, Ok
- HAALI Splitter: Ok
- FFDSHOW: 3326, Ok
- WIN7 preferred AVC CODEC: Ok
- WIN7 preferred VC-1 CODEC: Ok
- WIN7 preferred MPEG2 CODEC: Ok
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set to "libavcodec": Ok
- FFDSHOW AVC set to "ffmpeg-mt": Ok
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok
[17:09:30] - Failed video encode, aborted

 

how i have an amd processor

 

I use a program called SpeedFan to monitor the temps in my PC. You can find it here.


http://www.almico.com/speedfan.php

Vulcan94

 

Ok my Core temp is 52C and my fan temp1 is 45C cpu usage is near 0% and its stuck at 33.89%

 

How much space do you have left on your hard drive and if there is plenty then check for fragmentation?

albionfog


Your issue seems to be that BD RB is unable to call up x.264. How many previous re-encodes have you had succeed?

In your BD RB folder there is a file labeled REG_MSCOMCTL. Right click on it and choose run as administrator and see if that helps.

 

I have done 21 successful movies a few were not re-encodes though just direct copy's. I will give that a try and see what happens.

 

Ok I tried that but it still gave a encode fail.

 

ok my drives were last defraged 5/5/10 and i have 325gb left on a 1tb dr

 

There are a few BD movies out there that tends to elude everyone but the experienced so let's get radical. Sometimes errors crop up in the ini file so lets delete it (BDREBUILDER) and then retrace just BD RB's setup only. It's generally a good idea to select a single audio track to re-encode and observe the differences between what will work on the different disc sizes.

wakko

Have you had any successes yet?

 

[15:35:23] BD Rebuilder v0.33.06 (beta)
- Source: BATMAN_1989
- Input BD size: 38.58 GB
- Approximate total content: [05:38:47.448]
- Target BD size: 22.90 GB
- Windows Version: 6.0 [6002]
- Audio Settings: AC3=1 DTS=1 HD=0 Kbs=640
[15:35:30] PHASE ONE, Encoding
- [15:35:30] Extracting A/V streams [VID_00037]
- [15:35:37] Reencoding: VID_00037 (1 of 25)
- [15:35:37] Collecting video information
- Source Video: VC-1, 720x480
- Rate/Length: 29.970fps, 2,890 frames
- [15:35:37] Reencoding: VID_00037, Pass 1 of 1
- Encode failed. Retrying.
- Encode failed. Retrying.
- Reached retry limit. Aborting.
- BD-Rebuilder v0.33.06 (beta)
- Windows Version: 6.0 [6002]
- AVISYNTH Version: 2.5.7.0, Ok
- HAALI Splitter: Ok
- FFDSHOW: 3326, Ok
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set to "libmpeg2": Ok
- FFDSHOW AVC set to "libavcodec": Ok
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok
[15:35:41] - Failed video encode, aborted

 

wakko

Which version of Windows are you using again? I can't remember but is it Vista? Also I'm looking at this "Source Video: VC-1, 720x480, at 29.97 frames." The Source Video is VC-1 720X480?" It's not Blu-Ray compliant and I don't see any other video streams? There is also over 5 and a half hours of content. Try using a BD Disc that is being used among members such as Batman: Dark Knight and see how that works.

 

nope

[15:35:23] BD Rebuilder v0.33.06 (beta)
- Source: BATMAN_1989
- Input BD size: 38.58 GB
- Approximate total content: [05:38:47.448]
- Target BD size: 22.90 GB
- Windows Version: 6.0 [6002]
- Audio Settings: AC3=1 DTS=1 HD=0 Kbs=640
[15:35:30] PHASE ONE, Encoding
- [15:35:30] Extracting A/V streams [VID_00037]
- [15:35:37] Reencoding: VID_00037 (1 of 25)
- [15:35:37] Collecting video information
- Source Video: VC-1, 720x480
- Rate/Length: 29.970fps, 2,890 frames
- [15:35:37] Reencoding: VID_00037, Pass 1 of 1
- Encode failed. Retrying.
- Encode failed. Retrying.
- Reached retry limit. Aborting.
- BD-Rebuilder v0.33.06 (beta)
- Windows Version: 6.0 [6002]
- AVISYNTH Version: 2.5.7.0, Ok
- HAALI Splitter: Ok
- FFDSHOW: 3326, Ok
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set to "libmpeg2": Ok
- FFDSHOW AVC set to "libavcodec": Ok
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok
[15:35:41] - Failed video encode, aborted

 

im using windows vista

 

-----------------------
[10:48:38] BD Rebuilder v0.33.06 (beta)
- Source: THE_DARK_KNIGHT
- Input BD size: 37.92 GB
- Approximate total content: [03:47:28.960]
- Target BD size: 22.66 GB
- Windows Version: 6.0 [6002]
- One Pass ABR Mode enabled
- Audio Settings: AC3=1 DTS=1 HD=0 Kbs=640
[10:48:40] PHASE ONE, Encoding
- [10:48:40] Extracting A/V streams [VID_00010]
- [10:48:42] Reencoding: VID_00010 (1 of 4)
- [10:48:42] Collecting video information
- Source Video: VC-1, 1920x1080
- Rate/Length: 29.970fps, 1,800 frames
- [10:48:42] Reencoding: VID_00010, Pass 1 of 1
- Encode failed. Retrying.
- Encode failed. Retrying.
- Reached retry limit. Aborting.
- BD-Rebuilder v0.33.06 (beta)
- Windows Version: 6.0 [6002]
- AVISYNTH Version: 2.5.7.0, Ok
- HAALI Splitter: Ok
- FFDSHOW: 3326, Ok
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set to "libmpeg2": Ok
- FFDSHOW AVC set to "libavcodec": Ok
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok
[10:48:45] - Failed video encode, aborted

 

Something is preventing BD RB from calling up the encoder. On Vista that usually means that a file requires permission. If you have a software firewall that also can block an application from working. Although BD RB might appear to be working fine FFDSHOW or X.264 might not. There is a file in BD RB folder called "REG_MSCOMCTL" if you haven't already then right click on it with your mouse and choose run as administrator. It will either give it permission to run or indicate that it's running.

 

-----------------------
[15:58:49] BD Rebuilder v0.33.06 (beta)
- Source: THE_DARK_KNIGHT
- Input BD size: 37.92 GB
- Approximate total content: [03:47:28.960]
- Target BD size: 22.66 GB
- Windows Version: 6.0 [6002]
- One Pass ABR Mode enabled
- Audio Settings: AC3=1 DTS=1 HD=0 Kbs=640
[15:58:52] PHASE ONE, Encoding
- [15:58:52] Extracting A/V streams [VID_00010]
- [15:58:52] Reencoding: VID_00010 (1 of 4)
- [15:58:52] Collecting video information
- Source Video: VC-1, 1920x1080
- Rate/Length: 29.970fps, 1,800 frames
- [15:58:52] Reencoding: VID_00010, Pass 1 of 1
- Encode failed. Retrying.
- Encode failed. Retrying.
- Reached retry limit. Aborting.
- BD-Rebuilder v0.33.06 (beta)
- Windows Version: 6.0 [6002]
- AVISYNTH Version: 2.5.7.0, Ok
- HAALI Splitter: Ok
- FFDSHOW: 3326, Ok
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set to "libmpeg2": Ok
- FFDSHOW AVC set to "libavcodec": Ok
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok
[15:58:53] - Failed video encode, aborted
still fails

 

I agree with you that AMD will work with BD-RB and that they are cheaper, but there is some significant differences between Intel Core i7 chips and AMD (excluding the latest 6 core - which I know nothing about yet)AMD had to go to the drawing board after the core i7's release because the architecture of the new Intel chip was significantly better in several ways see HERE and HERE and if you have the time - there is a white paper HERE. I believe the big differences have to do with overall chip layout and QPI and scalable memory access - in some ways the i7 is similar to the AMD Phenom, but there are some differences which do make the i7 a faster - higher bandwidth CPU than the AMD's. I am no expert - but there are differences!!! Personally I wasted $300 on a i7 -950 instead of a 920 - there is a small voltage difference between the two - not worth the $300 though. Allot of folks are running 920's at 3.7 + - they won't last very long at that degree of o.c'ing - too much heat - voltages have to be set too high -IMO.

 

It might not make a difference - but I believe the consensus for vista and win7 is Mpeg2 set to libavcodec?

I was able to do Dark Knight on win7 x64 with older bd-rb version...Maybe Sophocles will see something else...