BD RB Beta released! - now at version 0.37.08 (April 23rd, 2011)

Update to 36.04. This update could resolve the recently reported audio sync problems. Also please read the post before this one to get review previous corrections. It's our reports that keep the improvements coming. Thank you for your efforts.

http://www.jdobbs.net/freeware/BD-RBV03604.zip

 

Hi,
Soph , can you help me with something? As it stands I downloaded the new bd rebuilder and it wont shrink The Dark Knight.

I dont kno what the problem is. It shrunk it before and now it wont.

I downloaded all of the software from the start of this thread and made sure I uninstalled the lot of the previous programs and reinstalled these onnes I have.

Tho its still having a problem with Haali Splitter.

Heres my log if that would help:

[17:10:41] BD Rebuilder v0.36.03 (beta)
- Source: THE_DARK_KNIGHT
- Input BD size: 34.76 GB
- Approximate total content: [02:32:13.332]
- Target BD size: 22.95 GB
- Windows Version: 6.1 [7600]
- MOVIE-ONLY mode enabled
- Quality: Good (Very Fast), CRF
- Audio Settings: AC3=1 DTS=1 HD=0 Kbs=640
[17:10:44] PHASE ONE, Encoding
- [17:10:44] Extracting A/V streams [VID_00007]
- [17:21:54] Reencoding: VID_00007 (1 of 1)
- [17:21:54] Collecting video information
- Source Video: VC-1, 1920x1080
- Rate/Length: 23.976fps, 218,981 frames
- [17:21:54] Performing CRF Prediction...
- Analyzing 11.00 - Encode failed. Retrying.
- Encode failed. Retrying.
- Reached retry limit. Aborting.
- BD-Rebuilder v0.36.03 (beta)
- Windows Version: 6.1 [7600]
- AVISYNTH Version: 2.5.7.0, Ok
- HAALI Splitter: Isn't recommended version
- FFDSHOW: 3326, Ok
- WIN7 preferred AVC CODEC: Ok
- WIN7 preferred VC-1 CODEC: Ok
- WIN7 preferred MPEG2 CODEC: Ok
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set to "libavcodec": Ok
- FFDSHOW AVC set to "libavcodec": Ok
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok
[17:26:19] - Failed video encode, aborted

What seems to be the problem with it?

 

You have the wrong version of Haali splitter which is likely the cause. Note: that it's also referred to as Matroska splitter. Click the link below and install this version.


http://www.jdobbs.net/freeware/MatroskaSplitter.exe


While you're at it you just might want to update to BD RB version 36.04 since you're using 36.03, but the above cause is likely it.

Now give it a try and let us know how it works out.

 

I tried it on that one I have and also the newest one but the both of them dont work with the dark knight.

[23:17:16] BD Rebuilder v0.36.04 (beta)
- Source: THE_DARK_KNIGHT
- Input BD size: 34.76 GB
- Approximate total content: [02:32:13.332]
- Target BD size: 22.95 GB
- Windows Version: 6.1 [7600]
- MOVIE-ONLY mode enabled
- Quality: Good (Very Fast), CRF
- Audio Settings: AC3=1 DTS=1 HD=0 Kbs=640
[23:17:16] PHASE ONE, Encoding
- [23:17:16] Extracting A/V streams [VID_00007]
- [23:32:07] Reencoding: VID_00007 (1 of 1)
- [23:32:07] Collecting video information
- Source Video: VC-1, 1920x1080
- Rate/Length: 23.976fps, 218,981 frames
- [23:32:07] Performing CRF Prediction...
- Analyzing 11.00 - Encode failed. Retrying.
- Encode failed. Retrying.
- Reached retry limit. Aborting.
- BD-Rebuilder v0.36.04 (beta)
- Windows Version: 6.1 [7600]
- AVISYNTH Version: 2.5.7.0, Ok
- HAALI Splitter: Isn't recommended version
- FFDSHOW: 3326, Ok
- WIN7 preferred AVC CODEC: Ok
- WIN7 preferred VC-1 CODEC: Ok
- WIN7 preferred MPEG2 CODEC: Ok
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set to "libavcodec": Ok
- FFDSHOW AVC set to "libavcodec": Ok
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok
[23:36:35] - Failed video encode, aborted

 

This is the newest one with the matroska splitter you recommended installed:

[23:46:36] BD Rebuilder v0.36.04 (beta)
- Source: THE_DARK_KNIGHT
- Input BD size: 34.76 GB
- Approximate total content: [02:32:13.332]
- Target BD size: 22.95 GB
- Windows Version: 6.1 [7600]
- MOVIE-ONLY mode enabled
- Quality: Good (Very Fast), CRF
- Audio Settings: AC3=1 DTS=1 HD=0 Kbs=640
[23:46:42] PHASE ONE, Encoding
- [23:46:42] Extracting A/V streams [VID_00007]
- [23:58:13] Reencoding: VID_00007 (1 of 1)
- [23:58:13] Collecting video information
- Source Video: VC-1, 1920x1080
- Rate/Length: 23.976fps, 218,981 frames
- [23:58:13] Performing CRF Prediction...
- Analyzing 11.00 - Encode failed. Retrying.
- Encode failed. Retrying.
- Reached retry limit. Aborting.
- BD-Rebuilder v0.36.04 (beta)
- Windows Version: 6.1 [7600]
- AVISYNTH Version: 2.5.7.0, Ok
- HAALI Splitter: Isn't recommended version
- FFDSHOW: 3326, Ok
- WIN7 preferred AVC CODEC: Ok
- WIN7 preferred VC-1 CODEC: Ok
- WIN7 preferred MPEG2 CODEC: Ok
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set to "libavcodec": Ok
- FFDSHOW AVC set to "libavcodec": Ok
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok
[00:02:13] - Failed video encode, aborted

 

MGEdit
Send private message to this user


According to your last post you're still using the wrong version of Haali splitter.

Go to start>>programs>>Haali Slitter and remove the old version. Then copy the link below and reinstall it.

http://www.jdobbs.net/freeware/MatroskaSplitter.exe

When that's done go into your BD RB folder and locate the one labeled "BDREBUILDER" and delete it. Then once you've redone settings go to Inspect and copy the results here.

 

I just bought a new computer, windows 7 an intel processor E5500,6gb DDR3. 1TB hardrive. I installed all the other stuff. But after downlopading BD-RB folder, I tried to open BD-RB and I noticed that BD-RB exe is changed to BD-RB without the exe. Awindow pops up saying"componet 'MSCOMCTL.OCX' or one of its dependencies not correctly registered: a file is missing or invalid. Can you help. I bought this computor to burn BD's faster.
Well I don't know what I did but posted 3 times, sorry about that.

 

In your BD RB folder make certain this isn't in your INF file "SUPPRESS_FF_WARNING=1" if it is then delete it. It's added when you tell BD-RB to not ask you again about setting the registry.

Next: Go to command prompt icon, right click and choose run as administrator. This opens cmd.

Then type as follows below and note all the spaces, when you're done then hit enter:

To enable the Windows 7 administrator account:

net user administrator /active:yes

When that's done return to BD RB folder and locate MSCOMCTL.OCX right click and register it.

 

I've been receiving private quests for assistance by PM. While I've answered them respectfully it seems antithetical to purpose of this thread. When an issue gets resolved by PM the only beneficiary is the sender of the original message. Where this becomes an issue is that the same question is often asked by another who would've benefited had a successful resolution been made public; therefore I will not assist with anymore issues sent by PM or I will copy and paste the question in this thread with the senders nic and then answer it here. HLG

 

I couldn't find any of the first stuff butI did R click MSCOMCTL.OCX and registered it.
When I open BD-Rb BR-RB warning pops up. Could not find a vaslid path for these required tools: x264.exe, tsmuxer.exe, wavi.exe, aften.exe, decomb.dill, mkvwerge.exe
recommend you reinstall all included files
Will try to redownload and install BR-RB.

 

I redownloaded and reinstalled BR-RB and smae message.

 

1.Which version of Windows are you using?

2. Run inspect which is your BD folder then copy and post the result here.

 

help me!!!
-----------------------
[15:39:23] BD Rebuilder v0.36.04 (beta)
- Source: BRUCE_ALMIGHTY
- Input BD size: 23.16 GB
- Approximate total content: [02:29:11.776]
- Target BD size: 22.90 GB
- Windows Version: 6.1 [7600]
- Auto Quality: Good (Very Fast), ABR
- Audio Settings: AC3=1 DTS=1 HD=0 Kbs=640
[15:39:29] PHASE ONE, Encoding
- [15:39:29] Extracting A/V streams [VID_00056]
- [15:39:33] Reencoding: VID_00056 (1 of 5)
- [15:39:33] Collecting video information
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 7,200 frames
- [15:39:33] Reencoding: VID_00056, Pass 1 of 1
- [15:41:56] Video Encode complete
- [15:41:56] Reencoding audio tracks (if req'd)
- [15:41:56] Multiplexing M2TS
- [15:41:58] Extracting A/V streams [VID_00011]
- [15:42:04] Reencoding: VID_00011 (2 of 5)
- [15:42:04] Collecting video information
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 10,630 frames
- [15:42:04] Reencoding: VID_00011, Pass 1 of 1
- [15:42:40] Video Encode complete
- [15:42:40] Reencoding audio tracks (if req'd)
- [15:42:43] Multiplexing M2TS
- [15:42:45] Extracting A/V streams [VID_00079]
- [15:42:53] Reencoding: VID_00079 (3 of 5)
- [15:42:53] Collecting video information
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 11,910 frames
- [15:42:53] Reencoding: VID_00079, Pass 1 of 1
- [15:43:50] Video Encode complete
- [15:43:50] Reencoding audio tracks (if req'd)
- [15:43:53] Multiplexing M2TS
- [15:43:57] Extracting A/V streams [VID_00080]
- [15:44:40] Reencoding: VID_00080 (4 of 5)
- [15:44:40] Collecting video information
- [15:44:40] Keeping original video (no reencode)
- [15:44:40] Reencoding audio tracks (if req'd)
- [15:44:53] Multiplexing M2TS
- Error in attempt to multiplex: MUX_00080.meta
- Can't open file: C:\WORKFILES\VID_00080.AVS.264
[15:44:53] - Failed to build structure, aborted

 

wakko

Your target size is almost the same size as that of a standard DVD-25 23.16 GB and your target size is 22.90 GB. Have you tried just burning the folder before even using BD RB? If not give that a try, it just might fit.

 

-----------------------
[14:47:05] BD Rebuilder v0.36.04 (beta)
- Source: GROWN_UPS
- Input BD size: 37.41 GB
- Approximate total content: [02:55:33.931]
- Target BD size: 22.90 GB
- Windows Version: 6.1 [7600]
- Auto Quality: Good (Very Fast), ABR
- Audio Settings: AC3=1 DTS=1 HD=0 Kbs=640
[14:47:10] PHASE ONE, Encoding
- [14:47:10] Extracting A/V streams [VID_00021]
- [14:47:11] Reencoding: VID_00021 (1 of 35)
- [14:47:11] Collecting video information
- [14:47:11] Keeping original video (no reencode)
- [14:47:11] Reencoding audio tracks (if req'd)
- [14:47:12] Multiplexing M2TS
- Error in attempt to multiplex: MUX_00021.meta
- Can't open file: C:\WORKFILES\VID_00021.AVS.264
[14:47:12] - Failed to build structure, aborted
this one looks too big to squeeze on a 25 gb

 

Delete your INI file and redo settings.

 

Wiundows 7 Home

I downloaded these from the first post

- Windows Version: 6.1 [7600]
- AVISYNTH Version: 2.5.7.0, Ok
- HAALI Splitter: Isn't recommended version
- FFDSHOW: 3326, Ok
- WIN7 preferred AVC CODEC: Ok
- WIN7 preferred VC-1 CODEC: Ok
- WIN7 preferred MPEG2 CODEC: Ok
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set to "libavcodec": Ok
- FFDSHOW AVC set to "libavcodec": Ok
- BD Rebuilder v0.36.0.4, Ok
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok

 

done and no go
-----------------------
[19:32:54] BD Rebuilder v0.36.04 (beta)
- Source: GROWN_UPS
- Input BD size: 37.41 GB
- Approximate total content: [02:55:33.931]
- Target BD size: 22.95 GB
- Windows Version: 6.1 [7600]
- Auto Quality: Good (Very Fast), ABR
- Audio Settings: AC3=1 DTS=1 HD=0 Kbs=640
[19:32:57] PHASE ONE, Encoding
- [19:32:57] Extracting A/V streams [VID_00021]
- [19:32:57] Reencoding: VID_00021 (1 of 35)
- [19:32:57] Collecting video information
- [19:32:57] Keeping original video (no reencode)
- [19:32:57] Reencoding audio tracks (if req'd)
- [19:32:58] Multiplexing M2TS
- Error in attempt to multiplex: MUX_00021.meta
- Can't open file: C:\WORKFILES\VID_00021.AVS.264
[19:32:58] - Failed to build structure, aborted